Commit 6c28f2c0 authored by Matt LaPlante's avatar Matt LaPlante Committed by Adrian Bunk
Browse files

Fix typos in Documentation/: 'B'-'C' 



This patch fixes typos in various Documentation txts. This patch addresses some
words starting with the letters 'B'-'C'.  There are also a few grammar fixes
thrown in for Randy. ;)

Signed-off-by: default avatarMatt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 3f6dee9b

Documentation/IPMI.txt

+1 −1
Original line number Diff line number Diff line
@@ -468,7 +468,7 @@ BMCs specified on the smb_addr line will be detected. 
Setting smb_dbg_probe to 1 will enable debugging of the probing and

detection process for BMCs on the SMBusses.



Discovering the IPMI compilant BMC on the SMBus can cause devices

Discovering the IPMI compliant BMC on the SMBus can cause devices

on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI

message as a block write to the I2C bus and waits for a response.

This action can be detrimental to some I2C devices. It is highly recommended

Documentation/block/barrier.txt

+1 −1
Original line number Diff line number Diff line
@@ -25,7 +25,7 @@ of the following three ways. 
i. For devices which have queue depth greater than 1 (TCQ devices) and

support ordered tags, block layer can just issue the barrier as an

ordered request and the lower level driver, controller and drive

itself are responsible for making sure that the ordering contraint is

itself are responsible for making sure that the ordering constraint is

met.  Most modern SCSI controllers/drives should support this.



NOTE: SCSI ordered tag isn't currently used due to limitation in the

Documentation/cciss.txt

+1 −1
Original line number Diff line number Diff line
@@ -152,7 +152,7 @@ side during the SCSI error recovery process, the cciss driver only 
implements the first two of these actions, aborting the command, and

resetting the device.  Additionally, most tape drives will not oblige 

in aborting commands, and sometimes it appears they will not even 

obey a reset coommand, though in most circumstances they will.  In

obey a reset command, though in most circumstances they will.  In

the case that the command cannot be aborted and the device cannot be 

reset, the device will be set offline.

Documentation/dell_rbu.txt

+1 −1
Original line number Diff line number Diff line
@@ -41,7 +41,7 @@ The driver supports two types of update mechanism; monolithic and packetized. 
These update mechanism depends upon the BIOS currently running on the system.

Most of the Dell systems support a monolithic update where the BIOS image is

copied to a single contiguous block of physical memory.

In case of packet mechanism the single memory can be broken in smaller chuks

In case of packet mechanism the single memory can be broken in smaller chunks

of contiguous memory and the BIOS image is scattered in these packets.



By default the driver uses monolithic memory for the update type. This can be

Documentation/dvb/faq.txt

+1 −1
Original line number Diff line number Diff line
@@ -138,7 +138,7 @@ Some very frequently asked questions about linuxtv-dvb 


	- v4l2-common: common functions for Video4Linux-2 drivers



	- v4l1-compat: backward compatiblity layer for Video4Linux-1 legacy

	- v4l1-compat: backward compatibility layer for Video4Linux-1 legacy

	  applications



	- dvb-core: DVB core module. This provides you with the

CRA Git | Maintained and supported by SUSTech CRA and CCSE