+5
−8
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by:Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE