ARM: OMAP3: Remove legacy support for am3517crane (6b7720f9) · Commits · 戴 / test

arch/arm/mach-omap2/Kconfig

+0 −5

Original line number	Diff line number	Diff line
		@@ -213,11 +213,6 @@ config MACH_OVERO
		default y
		select OMAP_PACKAGE_CBB

		config MACH_CRANEBOARD
		bool "AM3517/05 CRANE board"
		depends on ARCH_OMAP3
		select OMAP_PACKAGE_CBB

		config MACH_OMAP3_PANDORA
		bool "OMAP3 Pandora"
		depends on ARCH_OMAP3

arch/arm/mach-omap2/Makefile

+0 −2

Original line number	Diff line number	Diff line
		@@ -253,8 +253,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
		obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
		obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o

		obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o

		obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o

		# Platform specific device init code

arch/arm/mach-omap2/board-am3517crane.c

deleted100644 → 0

+0 −150

Original line number	Diff line number	Diff line
		/*
		* Support for AM3517/05 Craneboard
		* http://www.mistralsolutions.com/products/craneboard.php
		*
		* Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
		* Author: R.Srinath <srinath@mistralsolutions.com>
		*
		* Based on mach-omap2/board-am3517evm.c
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		* Free Software Foundation version 2.
		*
		* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
		* whether express or implied; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
		* General Public License for more details.
		*/

		#include <linux/kernel.h>
		#include <linux/init.h>
		#include <linux/gpio.h>
		#include <linux/mfd/tps65910.h>
		#include <linux/mtd/mtd.h>
		#include <linux/mtd/nand.h>
		#include <linux/mtd/partitions.h>
		#include <linux/omap-gpmc.h>

		#include <asm/mach-types.h>
		#include <asm/mach/arch.h>
		#include <asm/mach/map.h>

		#include "common.h"
		#include "common-board-devices.h"
		#include "board-flash.h"

		#include "am35xx-emac.h"
		#include "mux.h"
		#include "control.h"

		#define GPIO_USB_POWER 35
		#define GPIO_USB_NRESET 38

		#ifdef CONFIG_OMAP_MUX
		static struct omap_board_mux board_mux[] __initdata = {
		OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 \| OMAP_PIN_INPUT_PULLUP),
		{ .reg_offset = OMAP_MUX_TERMINATOR },
		};
		#endif

		static struct usbhs_phy_data phy_data[] __initdata = {
		{
		.port = 1,
		.reset_gpio = GPIO_USB_NRESET,
		.vcc_gpio = GPIO_USB_POWER,
		.vcc_polarity = 1,
		},
		};

		static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
		.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
		};

		static struct mtd_partition crane_nand_partitions[] = {
		{
		.name = "X-Loader",
		.offset = 0,
		.size = 4 * NAND_BLOCK_SIZE,
		.mask_flags = MTD_WRITEABLE,
		},
		{
		.name = "U-Boot",
		.offset = MTDPART_OFS_APPEND,
		.size = 14 * NAND_BLOCK_SIZE,
		.mask_flags = MTD_WRITEABLE,
		},
		{
		.name = "U-Boot Env",
		.offset = MTDPART_OFS_APPEND,
		.size = 2 * NAND_BLOCK_SIZE,
		},
		{
		.name = "Kernel",
		.offset = MTDPART_OFS_APPEND,
		.size = 40 * NAND_BLOCK_SIZE,
		},
		{
		.name = "File System",
		.offset = MTDPART_OFS_APPEND,
		.size = MTDPART_SIZ_FULL,
		},
		};

		static struct tps65910_board tps65910_pdata = {
		.irq = 7 + OMAP_INTC_START,
		.en_ck32k_xtal = true,
		};

		static struct i2c_board_info __initdata tps65910_board_info[] = {
		{
		I2C_BOARD_INFO("tps65910", 0x2d),
		.platform_data = &tps65910_pdata,
		},
		};

		static void __init am3517_crane_i2c_init(void)
		{
		omap_register_i2c_bus(1, 2600, tps65910_board_info,
		ARRAY_SIZE(tps65910_board_info));
		}

		static void __init am3517_crane_init(void)
		{
		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
		omap_serial_init();
		omap_sdrc_init(NULL, NULL);
		board_nand_init(crane_nand_partitions,
		ARRAY_SIZE(crane_nand_partitions), 0,
		NAND_BUSWIDTH_16, NULL);
		am3517_crane_i2c_init();

		/* Configure GPIO for EHCI port */
		if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
		GPIO_USB_NRESET);
		return;
		}

		if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) {
		pr_err("Can not configure mux for GPIO_USB_POWER %d\n",
		GPIO_USB_POWER);
		return;
		}

		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
		usbhs_init(&usbhs_bdata);
		am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
		}

		MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
		.atag_offset = 0x100,
		.reserve = omap_reserve,
		.map_io = omap3_map_io,
		.init_early = am35xx_init_early,
		.init_irq = omap3_init_irq,
		.init_machine = am3517_crane_init,
		.init_late = am35xx_init_late,
		.init_time = omap3_sync32k_timer_init,
		.restart = omap3xxx_restart,
		MACHINE_END

Admin message