Commit 6b0a1cf7 authored by Boris BREZILLON's avatar Boris BREZILLON Committed by Greg Kroah-Hartman
Browse files

USB: ohci-at91: add usb_clk for transition to common clk framework 



The AT91 PMC (Power Management Controller) provides an USB clock used by
USB Full Speed host (ohci) and USB Full Speed device (udc).
The usb drivers (ohci and udc) must configure this clock to 48Mhz.
This configuration was formely done in mach-at91/clock.c, but this
implementation will be removed when moving to common clk framework.

This patch adds support for usb clock retrieval and configuration, and is
backward compatible with the current at91 clk implementation (if usb clk
is not found, it does not configure/enable it).

Changes since v1:
 - use IS_ENABLED(CONFIG_COMMON_CLK) to isolate new at91 clk support

Signed-off-by: default avatarBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6753f4cf

drivers/usb/host/ohci-at91.c

+21 −2
Original line number Diff line number Diff line
@@ -31,8 +31,8 @@ 
#define at91_for_each_port(index)	\

		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)



/* interface and function clocks; sometimes also an AHB clock */

static struct clk *iclk, *fclk, *hclk;

/* interface, function and usb clocks; sometimes also an AHB clock */

static struct clk *iclk, *fclk, *uclk, *hclk;

static int clocked;



extern int usb_disabled(void);
@@ -41,6 +41,10 @@ extern int usb_disabled(void); 


static void at91_start_clock(void)

{

	if (IS_ENABLED(CONFIG_COMMON_CLK)) {

		clk_set_rate(uclk, 48000000);

		clk_prepare_enable(uclk);

	}

	clk_prepare_enable(hclk);

	clk_prepare_enable(iclk);

	clk_prepare_enable(fclk);
@@ -52,6 +56,8 @@ static void at91_stop_clock(void) 
	clk_disable_unprepare(fclk);

	clk_disable_unprepare(iclk);

	clk_disable_unprepare(hclk);

	if (IS_ENABLED(CONFIG_COMMON_CLK))

		clk_disable_unprepare(uclk);

	clocked = 0;

}
@@ -162,6 +168,14 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, 
		retval = PTR_ERR(hclk);

		goto err5;

	}

	if (IS_ENABLED(CONFIG_COMMON_CLK)) {

		uclk = clk_get(&pdev->dev, "usb_clk");

		if (IS_ERR(uclk)) {

			dev_err(&pdev->dev, "failed to get uclk\n");

			retval = PTR_ERR(uclk);

			goto err6;

		}

	}



	at91_start_hc(pdev);

	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -173,6 +187,9 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, 
	/* Error handling */

	at91_stop_hc(pdev);



	if (IS_ENABLED(CONFIG_COMMON_CLK))

		clk_put(uclk);

 err6:

	clk_put(hclk);

 err5:

	clk_put(fclk);
@@ -212,6 +229,8 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd, 
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);

	usb_put_hcd(hcd);



	if (IS_ENABLED(CONFIG_COMMON_CLK))

		clk_put(uclk);

	clk_put(hclk);

	clk_put(fclk);

	clk_put(iclk);

CRA Git | Maintained and supported by SUSTech CRA and CCSE