Commit 6a8a0c1d authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Linus Walleij
Browse files

gpio: Driver for SYSCON-based GPIOs 



SYSCON driver was designed for using memory areas (registers)
that are used in several subsystems. There are systems (CPUs)
which use bits in one register for various purposes and thus
should be handled by various kernel subsystems. This driver
allows you to use the individual SYSCON bits as GPIOs.
ARM CLPS711X SYSFLG1 input lines has been added as first user
of this driver.

Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 19338530

Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt

0 → 100644
+17 −0
Original line number Diff line number Diff line 
* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs



Required properties:

- compatible: Should contain "cirrus,clps711x-mctrl-gpio".

- gpio-controller: Marks the device node as a gpio controller.

- #gpio-cells: Should be two. The first cell is the pin number and

  the second cell is used to specify the gpio polarity:

    0 = Active high,

    1 = Active low.



Example:

	sysgpio: sysgpio {

		compatible = "cirrus,ep7312-mctrl-gpio",

			     "cirrus,clps711x-mctrl-gpio";

		gpio-controller;

		#gpio-cells = <2>;

	};

drivers/gpio/Kconfig

+6 −0
Original line number Diff line number Diff line
@@ -290,6 +290,12 @@ config GPIO_STA2X11 
	  Say yes here to support the STA2x11/ConneXt GPIO device.

	  The GPIO module has 128 GPIO pins with alternate functions.



config GPIO_SYSCON

	tristate "GPIO based on SYSCON"

	depends on MFD_SYSCON && OF

	help

	  Say yes here to support GPIO functionality though SYSCON driver.



config GPIO_TS5500

	tristate "TS-5500 DIO blocks and compatibles"

	depends on TS5500 || COMPILE_TEST

drivers/gpio/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -77,6 +77,7 @@ obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o 
obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o

obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o

obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o

obj-$(CONFIG_GPIO_SYSCON)	+= gpio-syscon.o

obj-$(CONFIG_GPIO_TB10X)	+= gpio-tb10x.o

obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o

obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o

drivers/gpio/gpio-syscon.c

0 → 100644
+191 −0
Original line number Diff line number Diff line 
/*

 *  SYSCON GPIO driver

 *

 *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 */



#include <linux/err.h>

#include <linux/gpio.h>

#include <linux/module.h>

#include <linux/of.h>

#include <linux/of_device.h>

#include <linux/platform_device.h>

#include <linux/regmap.h>

#include <linux/mfd/syscon.h>



#define GPIO_SYSCON_FEAT_IN	BIT(0)

#define GPIO_SYSCON_FEAT_OUT	BIT(1)

#define GPIO_SYSCON_FEAT_DIR	BIT(2)



/* SYSCON driver is designed to use 32-bit wide registers */

#define SYSCON_REG_SIZE		(4)

#define SYSCON_REG_BITS		(SYSCON_REG_SIZE * 8)



/**

 * struct syscon_gpio_data - Configuration for the device.

 * compatible:		SYSCON driver compatible string.

 * flags:		Set of GPIO_SYSCON_FEAT_ flags:

 *			GPIO_SYSCON_FEAT_IN:	GPIOs supports input,

 *			GPIO_SYSCON_FEAT_OUT:	GPIOs supports output,

 *			GPIO_SYSCON_FEAT_DIR:	GPIOs supports switch direction.

 * bit_count:		Number of bits used as GPIOs.

 * dat_bit_offset:	Offset (in bits) to the first GPIO bit.

 * dir_bit_offset:	Optional offset (in bits) to the first bit to switch

 *			GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag).

 */



struct syscon_gpio_data {

	const char	*compatible;

	unsigned int	flags;

	unsigned int	bit_count;

	unsigned int	dat_bit_offset;

	unsigned int	dir_bit_offset;

};



struct syscon_gpio_priv {

	struct gpio_chip		chip;

	struct regmap			*syscon;

	const struct syscon_gpio_data	*data;

};



static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip)

{

	return container_of(chip, struct syscon_gpio_priv, chip);

}



static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)

{

	struct syscon_gpio_priv *priv = to_syscon_gpio(chip);

	unsigned int val, offs = priv->data->dat_bit_offset + offset;

	int ret;



	ret = regmap_read(priv->syscon,

			  (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);

	if (ret)

		return ret;



	return !!(val & BIT(offs % SYSCON_REG_BITS));

}



static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)

{

	struct syscon_gpio_priv *priv = to_syscon_gpio(chip);

	unsigned int offs = priv->data->dat_bit_offset + offset;



	regmap_update_bits(priv->syscon,

			   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,

			   BIT(offs % SYSCON_REG_BITS),

			   val ? BIT(offs % SYSCON_REG_BITS) : 0);

}



static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)

{

	struct syscon_gpio_priv *priv = to_syscon_gpio(chip);



	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {

		unsigned int offs = priv->data->dir_bit_offset + offset;



		regmap_update_bits(priv->syscon,

				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,

				   BIT(offs % SYSCON_REG_BITS), 0);

	}



	return 0;

}



static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)

{

	struct syscon_gpio_priv *priv = to_syscon_gpio(chip);



	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {

		unsigned int offs = priv->data->dir_bit_offset + offset;



		regmap_update_bits(priv->syscon,

				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,

				   BIT(offs % SYSCON_REG_BITS),

				   BIT(offs % SYSCON_REG_BITS));

	}



	syscon_gpio_set(chip, offset, val);



	return 0;

}



static const struct syscon_gpio_data clps711x_mctrl_gpio = {

	/* ARM CLPS711X SYSFLG1 Bits 8-10 */

	.compatible	= "cirrus,clps711x-syscon1",

	.flags		= GPIO_SYSCON_FEAT_IN,

	.bit_count	= 3,

	.dat_bit_offset	= 0x40 * 8 + 8,

};



static const struct of_device_id syscon_gpio_ids[] = {

	{

		.compatible	= "cirrus,clps711x-mctrl-gpio",

		.data		= &clps711x_mctrl_gpio,

	},

	{ }

};

MODULE_DEVICE_TABLE(of, syscon_gpio_ids);



static int syscon_gpio_probe(struct platform_device *pdev)

{

	struct device *dev = &pdev->dev;

	const struct of_device_id *of_id = of_match_device(syscon_gpio_ids, dev);

	struct syscon_gpio_priv *priv;



	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

	if (!priv)

		return -ENOMEM;



	priv->data = of_id->data;



	priv->syscon =

		syscon_regmap_lookup_by_compatible(priv->data->compatible);

	if (IS_ERR(priv->syscon))

		return PTR_ERR(priv->syscon);



	priv->chip.dev = dev;

	priv->chip.owner = THIS_MODULE;

	priv->chip.label = dev_name(dev);

	priv->chip.base = -1;

	priv->chip.ngpio = priv->data->bit_count;

	priv->chip.get = syscon_gpio_get;

	if (priv->data->flags & GPIO_SYSCON_FEAT_IN)

		priv->chip.direction_input = syscon_gpio_dir_in;

	if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) {

		priv->chip.set = syscon_gpio_set;

		priv->chip.direction_output = syscon_gpio_dir_out;

	}



	platform_set_drvdata(pdev, priv);



	return gpiochip_add(&priv->chip);

}



static int syscon_gpio_remove(struct platform_device *pdev)

{

	struct syscon_gpio_priv *priv = platform_get_drvdata(pdev);



	return gpiochip_remove(&priv->chip);

}



static struct platform_driver syscon_gpio_driver = {

	.driver	= {

		.name		= "gpio-syscon",

		.owner		= THIS_MODULE,

		.of_match_table	= syscon_gpio_ids,

	},

	.probe	= syscon_gpio_probe,

	.remove	= syscon_gpio_remove,

};

module_platform_driver(syscon_gpio_driver);



MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");

MODULE_DESCRIPTION("SYSCON GPIO driver");

MODULE_LICENSE("GPL");

CRA Git | Maintained and supported by SUSTech CRA and CCSE