+51
−6
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
We have a test case as follow: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] \ --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force When we readd /dev/sda to the array, it started to do recovery. After offline the other two disks in md1, the recovery have been interrupted and superblock update info cannot be written to the offline disks. While the spare disk (/dev/sda) can continue to update superblock info. After stopping the array and assemble it, we found the array run fail, with the follow kernel message: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) [ 173.023466] md: md1 stopped. Since both sdb and sdc have the value of 'sb->events' smaller than that in sda, they have been kicked from the array. However, the only remained disk sda is in 'spare' state before stop and it cannot be added to conf->mirrors[] array. In the end, raid array assemble and run fail. In fact, we can use the older disk sdb or sdc to assemble the array. That means we should not choose the 'spare' disk as the fresh disk in analyze_sbs(). To fix the problem, we do not compare superblock events when it is a spare disk, as same as validate_super. Signed-off-by:Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
CRA Git | Maintained and supported by SUSTech CRA and CCSE