+10
−8
+12
−65
+53
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Andrew Lunn says:
====================
Indirect phy access for mv88e6171
These two patches allow the mv88e6171 driver to access the port phys
using indirect addressing. Depending on pin strapping, the switch
either uses a single address on the host MDIO bus, requiring the port
phys are accessed indirectly, or the switch uses a number of addresses
on the host bus and the phys can be directly accessed.
The 370RD, the first supported platform to use the 6171 uses multiple
addresses, so this indirect mode was not required. However the
WRT1900AC has the switch configured to use a single address, and so
indirect access is needed.
The mv88e6352 already has all the needed code. Refactor it into the
shared mv88e6xxx and then use it in the mv88e6171 driver.
Tested on the 370RD and WRT1900AC.
It would be good if Guenter Roeck could test on his platform to ensure
i've not broken anything for the mv88e6352.
====================
Signed-off-by:
David S. Miller <davem@davemloft.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE