Commit 68c1644f authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'fix-RTL8211F-TX-delay-handling' 

Martin Blumenstingl says:

====================
net: phy: realtek: fix RTL8211F TX-delay handling

The RTL8211F PHY driver currently enables the TX-delay only when the
phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there
are three RGMII variations of the phy-mode which explicitly request the
PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII
specifies that the PHY should disable the RX and/or TX delays.

Additionally to the RTL8211F PHY driver change this contains a small
update to the phy-mode documentation to clarify the purpose of the
RGMII phy-modes.
While this may not be perfect yet it's at least a start. Please feel
free to drop this patch from this series and send an improved version
yourself.

These patches are the results of recent discussions, see [0]

[0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html


====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents d9363774 e3230494

Documentation/devicetree/bindings/net/ethernet.txt

+20 −4
Original line number Diff line number Diff line
@@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers: 
- max-speed: number, specifies maximum speed in Mbit/s supported by the device;

- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than

  the maximum frame size (there's contradiction in ePAPR).

- phy-mode: string, operation mode of the PHY interface; supported values are

  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",

  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a

  de-facto standard property;

- phy-mode: string, operation mode of the PHY interface. This is now a de-facto

  standard property; supported values are:

  * "mii"

  * "gmii"

  * "sgmii"

  * "qsgmii"

  * "tbi"

  * "rev-mii"

  * "rmii"

  * "rgmii" (RX and TX delays are added by the MAC when required)

  * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the

     MAC should not add the RX or TX delays in this case)

  * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC

     should not add an RX delay in this case)

  * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC

     should not add an TX delay in this case)

  * "rtbi"

  * "smii"

  * "xgmii"

  * "trgmii"

- phy-connection-type: the same as "phy-mode" property but described in ePAPR;

- phy-handle: phandle, specifies a reference to a node representing a PHY

  device; this property is described in ePAPR and so preferred;

drivers/net/phy/realtek.c

+12 −8
Original line number Diff line number Diff line
@@ -102,15 +102,19 @@ static int rtl8211f_config_init(struct phy_device *phydev) 
	if (ret < 0)

		return ret;



	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {

		/* enable TXDLY */

	phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);

	reg = phy_read(phydev, 0x11);



	/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||

	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)

		reg |= RTL8211F_TX_DELAY;

	else

		reg &= ~RTL8211F_TX_DELAY;



	phy_write(phydev, 0x11, reg);

	/* restore to default page 0 */

	phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);

	}



	return 0;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE