Commit 67fa24b4 authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter
Browse files

drm/i915: Always program unique transition scale for CHV 



The docs give you the impression that the unique transition scale
value shouldn't matter when unique transition scale is enabled. But
as Imre found on BXT (and I verfied also on BSW) the value does
matter. So from now on just program the same value 0x9a always.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarDeepak S <deepak.s@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 25a25dfc

drivers/gpu/drm/i915/intel_dp.c

+26 −27
Original line number Diff line number Diff line
@@ -3179,6 +3179,12 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp) 
	return 0;

}



static bool chv_need_uniq_trans_scale(uint8_t train_set)

{

	return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&

		(train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;

}



static uint32_t chv_signal_levels(struct intel_dp *intel_dp)

{

	struct drm_device *dev = intel_dp_to_dev(intel_dp);
@@ -3297,22 +3303,20 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp) 
	/* Program swing margin */

	for (i = 0; i < 4; i++) {

		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));



		val &= ~DPIO_SWING_MARGIN000_MASK;

		val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;

		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);

	}



	/* Disable unique transition scale */

	for (i = 0; i < 4; i++) {

		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));

		val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;

		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);

	}

		/*

		 * Supposedly this value shouldn't matter when unique transition

		 * scale is disabled, but in fact it does matter. Let's just

		 * always program the same value and hope it's OK.

		 */

		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);

		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;



	if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK)

			== DP_TRAIN_PRE_EMPH_LEVEL_0) &&

		((train_set & DP_TRAIN_VOLTAGE_SWING_MASK)

			== DP_TRAIN_VOLTAGE_SWING_LEVEL_3)) {

		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);

	}



	/*

	 * The document said it needs to set bit 27 for ch0 and bit 26
@@ -3322,18 +3326,13 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp) 
	 */

	for (i = 0; i < 4; i++) {

		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));

		if (chv_need_uniq_trans_scale(train_set))

			val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;

		else

			val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;

		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);

	}



		for (i = 0; i < 4; i++) {

			val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));

			val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);

			val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT);

			vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);

		}

	}



	/* Start swing calculation */

	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));

	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;

drivers/gpu/drm/i915/intel_hdmi.c

+16 −14
Original line number Diff line number Diff line
@@ -1849,31 +1849,33 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder) 


	for (i = 0; i < 4; i++) {

		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));



		val &= ~DPIO_SWING_MARGIN000_MASK;

		val |= 102 << DPIO_SWING_MARGIN000_SHIFT;



		/*

		 * Supposedly this value shouldn't matter when unique transition

		 * scale is disabled, but in fact it does matter. Let's just

		 * always program the same value and hope it's OK.

		 */

		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);

		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;



		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);

	}



	/* Disable unique transition scale */

	/*

	 * The document said it needs to set bit 27 for ch0 and bit 26

	 * for ch1. Might be a typo in the doc.

	 * For now, for this unique transition scale selection, set bit

	 * 27 for ch0 and ch1.

	 */

	for (i = 0; i < 4; i++) {

		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));

		val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;

		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);

	}



	/* Additional steps for 1200mV-0dB */

#if 0

	val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW3(ch));

	if (ch)

		val |= DPIO_TX_UNIQ_TRANS_SCALE_CH1;

	else

		val |= DPIO_TX_UNIQ_TRANS_SCALE_CH0;

	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(ch), val);



	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(ch),

			vlv_dpio_read(dev_priv, pipe, VLV_TX_DW2(ch)) |

				(0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT));

#endif

	/* Start swing calculation */

	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));

	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;

CRA Git | Maintained and supported by SUSTech CRA and CCSE