Commit 67ddc87f authored by David S. Miller's avatar David S. Miller
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 



Conflicts:
	drivers/net/wireless/ath/ath9k/recv.c
	drivers/net/wireless/mwifiex/pcie.c
	net/ipv6/sit.c

The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.

The two wireless conflicts were overlapping changes.

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 6092c79f c3bebc71

Documentation/ABI/testing/sysfs-tty

+1 −2
Original line number Diff line number Diff line
@@ -3,8 +3,7 @@ Date: Nov 2010 
Contact:	Kay Sievers <kay.sievers@vrfy.org>

Description:

		 Shows the list of currently configured

		 tty devices used for the console,

		 like 'tty1 ttyS0'.

		 console devices, like 'tty1 ttyS0'.

		 The last entry in the file is the active

		 device connected to /dev/console.

		 The file supports poll() to detect virtual

Documentation/PCI/MSI-HOWTO.txt

+109 −10
Original line number Diff line number Diff line
@@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer. It simply 
has to request that the PCI layer set up the MSI capability for this

device.



4.2.1 pci_enable_msi_range

4.2.1 pci_enable_msi



int pci_enable_msi(struct pci_dev *dev)



A successful call allocates ONE interrupt to the device, regardless

of how many MSIs the device supports.  The device is switched from

pin-based interrupt mode to MSI mode.  The dev->irq number is changed

to a new number which represents the message signaled interrupt;

consequently, this function should be called before the driver calls

request_irq(), because an MSI is delivered via a vector that is

different from the vector of a pin-based interrupt.



4.2.2 pci_enable_msi_range



int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
@@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) 
	return pci_enable_msi_range(pdev, nvec, nvec);

}



Note, unlike pci_enable_msi_exact() function, which could be also used to

enable a particular number of MSI-X interrupts, pci_enable_msi_range()

returns either a negative errno or 'nvec' (not negative errno or 0 - as

pci_enable_msi_exact() does).



4.2.1.3 Single MSI mode



The most notorious example of the request type described above is
@@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev) 
	return pci_enable_msi_range(pdev, 1, 1);

}



4.2.2 pci_disable_msi

Note, unlike pci_enable_msi() function, which could be also used to

enable the single MSI mode, pci_enable_msi_range() returns either a

negative errno or 1 (not negative errno or 0 - as pci_enable_msi()

does).



4.2.3 pci_enable_msi_exact



int pci_enable_msi_exact(struct pci_dev *dev, int nvec)



This variation on pci_enable_msi_range() call allows a device driver to

request exactly 'nvec' MSIs.



If this function returns a negative number, it indicates an error and

the driver should not attempt to request any more MSI interrupts for

this device.



By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()

returns zero in case of success, which indicates MSI interrupts have been

successfully allocated.



4.2.4 pci_disable_msi



void pci_disable_msi(struct pci_dev *dev)
@@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq(). 
Failure to do so results in a BUG_ON(), leaving the device with

MSI enabled and thus leaking its vector.



4.2.3 pci_msi_vec_count

4.2.4 pci_msi_vec_count



int pci_msi_vec_count(struct pci_dev *dev)
@@ -257,7 +294,7 @@ possible, likely up to the limit returned by pci_msix_vec_count() function: 


static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)

{

	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,

	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,

				     1, nvec);

}
@@ -269,7 +306,7 @@ In this case the function could look like this: 


static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)

{

	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,

	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,

				     FOO_DRIVER_MINIMUM_NVEC, nvec);

}
@@ -282,10 +319,15 @@ parameters: 


static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)

{

	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,

	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,

				     nvec, nvec);

}



Note, unlike pci_enable_msix_exact() function, which could be also used to

enable a particular number of MSI-X interrupts, pci_enable_msix_range()

returns either a negative errno or 'nvec' (not negative errno or 0 - as

pci_enable_msix_exact() does).



4.3.1.3 Specific requirements to the number of MSI-X interrupts



As noted above, there could be devices that can not operate with just any
@@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback - 
any error code other than -ENOSPC indicates a fatal error and should not

be retried.



4.3.2 pci_disable_msix

4.3.2 pci_enable_msix_exact



int pci_enable_msix_exact(struct pci_dev *dev,

			  struct msix_entry *entries, int nvec)



This variation on pci_enable_msix_range() call allows a device driver to

request exactly 'nvec' MSI-Xs.



If this function returns a negative number, it indicates an error and

the driver should not attempt to allocate any more MSI-X interrupts for

this device.



By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()

returns zero in case of success, which indicates MSI-X interrupts have been

successfully allocated.



Another version of a routine that enables MSI-X mode for a device with

specific requirements described in chapter 4.3.1.3 might look like this:



/*

 * Assume 'minvec' and 'maxvec' are non-zero

 */

static int foo_driver_enable_msix(struct foo_adapter *adapter,

				  int minvec, int maxvec)

{

	int rc;



	minvec = roundup_pow_of_two(minvec);

	maxvec = rounddown_pow_of_two(maxvec);



	if (minvec > maxvec)

		return -ERANGE;



retry:

	rc = pci_enable_msix_exact(adapter->pdev,

				   adapter->msix_entries, maxvec);



	/*

	 * -ENOSPC is the only error code allowed to be analyzed

	 */

	if (rc == -ENOSPC) {

		if (maxvec == 1)

			return -ENOSPC;



		maxvec /= 2;



		if (minvec > maxvec)

			return -ENOSPC;



		goto retry;

	} else if (rc < 0) {

		return rc;

	}



	return maxvec;

}



4.3.3 pci_disable_msix



void pci_disable_msix(struct pci_dev *dev)

Documentation/devicetree/bindings/arm/omap/omap.txt

+1 −1
Original line number Diff line number Diff line
@@ -91,7 +91,7 @@ Boards: 
  compatible = "ti,omap3-beagle", "ti,omap3"



- OMAP3 Tobi with Overo : Commercial expansion board with daughter board

  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"

  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"



- OMAP4 SDP : Software Development Board

  compatible = "ti,omap4-sdp", "ti,omap4430"

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

+2 −2
Original line number Diff line number Diff line
@@ -21,9 +21,9 @@ Required Properties: 
    must appear in the same order as the output clocks.

  - #clock-cells: Must be 1

  - clock-output-names: The name of the clocks as free-form strings

  - renesas,indices: Indices of the gate clocks into the group (0 to 31)

  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)



The clocks, clock-output-names and renesas,indices properties contain one

The clocks, clock-output-names and renesas,clock-indices properties contain one

entry per gate clock. The MSTP groups are sparsely populated. Unimplemented

gate clocks must not be declared.

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

+10 −6
Original line number Diff line number Diff line 
* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX



Required properties:

- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",

  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",

  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or

  "fsl,imx6q-sdma". The -to variants should be preferred since they

  allow to determnine the correct ROM script addresses needed for

  the driver to work without additional firmware.

- compatible : Should be one of

      "fsl,imx25-sdma"

      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"

      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"

      "fsl,imx51-sdma"

      "fsl,imx53-sdma"

      "fsl,imx6q-sdma"

  The -to variants should be preferred since they allow to determnine the

  correct ROM script addresses needed for the driver to work without additional

  firmware.

- reg : Should contain SDMA registers location and length

- interrupts : Should contain SDMA interrupt

- #dma-cells : Must be <3>.

CRA Git | Maintained and supported by SUSTech CRA and CCSE