+2
−2
+17
−2
+1
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Quoting Tore Anderson from : https://bugzilla.kernel.org/show_bug.cgi?id=42572 When RTAX_FEATURE_ALLFRAG is set on a route, the effective TCP segment size does not take into account the size of the IPv6 Fragmentation header that needs to be included in outbound packets, causing every transmitted TCP segment to be fragmented across two IPv6 packets, the latter of which will only contain 8 bytes of actual payload. RTAX_FEATURE_ALLFRAG is typically set on a route in response to receving a ICMPv6 Packet Too Big message indicating a Path MTU of less than 1280 bytes. 1280 bytes is the minimum IPv6 MTU, however ICMPv6 PTBs with MTU < 1280 are still valid, in particular when an IPv6 packet is sent to an IPv4 destination through a stateless translator. Any ICMPv4 Need To Fragment packets originated from the IPv4 part of the path will be translated to ICMPv6 PTB which may then indicate an MTU of less than 1280. The Linux kernel refuses to reduce the effective MTU to anything below 1280 bytes, instead it sets it to exactly 1280 bytes, and RTAX_FEATURE_ALLFRAG is also set. However, the TCP segment size appears to be set to 1240 bytes (1280 Path MTU - 40 bytes of IPv6 header), instead of 1232 (additionally taking into account the 8 bytes required by the IPv6 Fragmentation extension header). This in turn results in rather inefficient transmission, as every transmitted TCP segment now is split in two fragments containing 1232+8 bytes of payload. After this patch, all the outgoing packets that includes a Fragmentation header all are "atomic" or "non-fragmented" fragments, i.e., they both have Offset=0 and More Fragments=0. With help from David S. Miller Reported-by:Tore Anderson <tore@fud.no> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Tom Herbert <therbert@google.com> Tested-by:
Tore Anderson <tore@fud.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE