Commit 66d857b0 authored by Greg Ungerer's avatar Greg Ungerer
Browse files

m68k: merge m68k and m68knommu arch directories 



There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent d39dd11c

arch/m68k/Kconfig

+33 −423
Original line number Diff line number Diff line 
config M68K

	bool

	default y

	select HAVE_AOUT

	select HAVE_IDE

	select GENERIC_ATOMIC64



config MMU

	bool

	default y

	select HAVE_AOUT if MMU

	select GENERIC_ATOMIC64 if MMU

	select HAVE_GENERIC_HARDIRQS if !MMU

	select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU



config RWSEM_GENERIC_SPINLOCK

	bool
@@ -34,457 +32,67 @@ config TIME_LOW_RES 
	bool

	default y



config GENERIC_IOMAP

	bool

	default y



config ARCH_MAY_HAVE_PC_FDC

	bool

	depends on BROKEN && (Q40 || SUN3X)

	default y



config NO_IOPORT

	def_bool y



config NO_DMA

	def_bool SUN3

	def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)



config ZONE_DMA

	bool

	default y

config HZ

	int

	default 1000 if CLEOPATRA

	default 100



config ARCH_USES_GETTIMEOFFSET

	def_bool y



source "init/Kconfig"



source "kernel/Kconfig.freezer"



menu "Platform dependent setup"



config EISA

	bool

	---help---

	  The Extended Industry Standard Architecture (EISA) bus was

	  developed as an open alternative to the IBM MicroChannel bus.



	  The EISA bus provided some of the features of the IBM MicroChannel

	  bus while maintaining backward compatibility with cards made for

	  the older ISA bus.  The EISA bus saw limited use between 1988 and

	  1995 when it was made obsolete by the PCI bus.



	  Say Y here if you are building a kernel for an EISA-based machine.



	  Otherwise, say N.



config MCA

	bool

	help

	  MicroChannel Architecture is found in some IBM PS/2 machines and

	  laptops.  It is a bus system similar to PCI or ISA. See

	  <file:Documentation/mca.txt> (and especially the web page given

	  there) before attempting to build an MCA bus kernel.



config PCMCIA

	tristate

	---help---

	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux

	  computer.  These are credit-card size devices such as network cards,

	  modems or hard drives often used with laptops computers.  There are

	  actually two varieties of these cards: the older 16 bit PCMCIA cards

	  and the newer 32 bit CardBus cards.  If you want to use CardBus

	  cards, you need to say Y here and also to "CardBus support" below.



	  To use your PC-cards, you will need supporting software from David

	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>

	  for location).  Please also read the PCMCIA-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.



	  To compile this driver as modules, choose M here: the

	  modules will be called pcmcia_core and ds.



config AMIGA

	bool "Amiga support"

	select MMU_MOTOROLA if MMU

	help

	  This option enables support for the Amiga series of computers. If

	  you plan to use this kernel on an Amiga, say Y here and browse the

	  material available in <file:Documentation/m68k>; otherwise say N.



config ATARI

	bool "Atari support"

	select MMU_MOTOROLA if MMU

	help

	  This option enables support for the 68000-based Atari series of

	  computers (including the TT, Falcon and Medusa). If you plan to use

	  this kernel on an Atari, say Y here and browse the material

	  available in <file:Documentation/m68k>; otherwise say N.



config MAC

	bool "Macintosh support"

	select MMU_MOTOROLA if MMU

	help

	  This option enables support for the Apple Macintosh series of

	  computers (yes, there is experimental support now, at least for part

	  of the series).



	  Say N unless you're willing to code the remaining necessary support.

	  ;)



config NUBUS

	bool

	depends on MAC

	default y



config M68K_L2_CACHE

	bool

	depends on MAC

	default y



config APOLLO

	bool "Apollo support"

	select MMU_MOTOROLA if MMU

	help

	  Say Y here if you want to run Linux on an MC680x0-based Apollo

	  Domain workstation such as the DN3500.



config VME

	bool "VME (Motorola and BVM) support"

	select MMU_MOTOROLA if MMU

	help

	  Say Y here if you want to build a kernel for a 680x0 based VME

	  board.  Boards currently supported include Motorola boards MVME147,

	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and

	  BVME6000 boards from BVM Ltd are also supported.



config MVME147

	bool "MVME147 support"

	depends on VME

	help

	  Say Y to include support for early Motorola VME boards.  This will

	  build a kernel which can run on MVME147 single-board computers.  If

	  you select this option you will have to select the appropriate

	  drivers for SCSI, Ethernet and serial ports later on.



config MVME16x

	bool "MVME162, 166 and 167 support"

	depends on VME

	help

	  Say Y to include support for Motorola VME boards.  This will build a

	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and

	  MVME177 boards.  If you select this option you will have to select

	  the appropriate drivers for SCSI, Ethernet and serial ports later

	  on.



config BVME6000

	bool "BVME4000 and BVME6000 support"

	depends on VME

	help

	  Say Y to include support for VME boards from BVM Ltd.  This will

	  build a kernel which can run on BVME4000 and BVME6000 boards.  If

	  you select this option you will have to select the appropriate

	  drivers for SCSI, Ethernet and serial ports later on.



config HP300

	bool "HP9000/300 and HP9000/400 support"

	select MMU_MOTOROLA if MMU

	help

	  This option enables support for the HP9000/300 and HP9000/400 series

	  of workstations. Support for these machines is still somewhat

	  experimental. If you plan to try to use the kernel on such a machine

	  say Y here.

	  Everybody else says N.



config DIO

	bool "DIO bus support"

	depends on HP300

config MMU

	bool "MMU-based Paged Memory Management Support"

	default y

	help

	  Say Y here to enable support for the "DIO" expansion bus used in

	  HP300 machines. If you are using such a system you almost certainly

	  want this.



config SUN3X

	bool "Sun3x support"

	select MMU_MOTOROLA if MMU

	select M68030

	help

	  This option enables support for the Sun 3x series of workstations.

	  Be warned that this support is very experimental.

	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.

	  General Linux information on the Sun 3x series (now discontinued)

	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.

	  Select if you want MMU-based virtualised addressing space

	  support by paged memory management. If unsure, say 'Y'.



	  If you don't want to compile a kernel for a Sun 3x, say N.



config Q40

	bool "Q40/Q60 support"

	select MMU_MOTOROLA if MMU

	help

	  The Q40 is a Motorola 68040-based successor to the Sinclair QL

	  manufactured in Germany.  There is an official Q40 home page at

	  <http://www.q40.de/>.  This option enables support for the Q40 and

	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU

	  emulation.



config SUN3

	bool "Sun3 support"

	depends on !MMU_MOTOROLA

	select MMU_SUN3 if MMU

	select M68020

	help

	  This option enables support for the Sun 3 series of workstations

	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires

	  that all other hardware types must be disabled, as Sun 3 kernels

	  are incompatible with all other m68k targets (including Sun 3x!).



	  If you don't want to compile a kernel exclusively for a Sun 3, say N.



config NATFEAT

	bool "ARAnyM emulator support"

	depends on ATARI

	help

	  This option enables support for ARAnyM native features, such as

	  access to a disk image as /dev/hda.



config NFBLOCK

	tristate "NatFeat block device support"

	depends on BLOCK && NATFEAT

	help

	  Say Y to include support for the ARAnyM NatFeat block device

	  which allows direct access to the hard drives without using

	  the hardware emulation.



config NFCON

	tristate "NatFeat console driver"

	depends on NATFEAT

	help

	  Say Y to include support for the ARAnyM NatFeat console driver

	  which allows the console output to be redirected to the stderr

	  output of ARAnyM.



config NFETH

	tristate "NatFeat Ethernet support"

	depends on NET_ETHERNET && NATFEAT

	help

	  Say Y to include support for the ARAnyM NatFeat network device

	  which will emulate a regular ethernet device while presenting an

	  ethertap device to the host system.



comment "Processor type"



config M68020

	bool "68020 support"

	help

	  If you anticipate running this kernel on a computer with a MC68020

	  processor, say Y. Otherwise, say N. Note that the 68020 requires a

	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the

	  Sun 3, which provides its own version.



config M68030

	bool "68030 support"

	depends on !MMU_SUN3

	help

	  If you anticipate running this kernel on a computer with a MC68030

	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not

	  work, as it does not include an MMU (Memory Management Unit).



config M68040

	bool "68040 support"

	depends on !MMU_SUN3

	help

	  If you anticipate running this kernel on a computer with a MC68LC040

	  or MC68040 processor, say Y. Otherwise, say N. Note that an

	  MC68EC040 will not work, as it does not include an MMU (Memory

	  Management Unit).



config M68060

	bool "68060 support"

	depends on !MMU_SUN3

	help

	  If you anticipate running this kernel on a computer with a MC68060

	  processor, say Y. Otherwise, say N.



config MMU_MOTOROLA

	bool



config MMU_SUN3

	bool

	depends on MMU && !MMU_MOTOROLA



config M68KFPU_EMU

	bool "Math emulation support (EXPERIMENTAL)"

	depends on EXPERIMENTAL

	help

	  At some point in the future, this will cause floating-point math

	  instructions to be emulated by the kernel on machines that lack a

	  floating-point math coprocessor.  Thrill-seekers and chronically

	  sleep-deprived psychotic hacker types can say Y now, everyone else

	  should probably wait a while.



config M68KFPU_EMU_EXTRAPREC

	bool "Math emulation extra precision"

	depends on M68KFPU_EMU

	help

	  The fpu uses normally a few bit more during calculations for

	  correct rounding, the emulator can (often) do the same but this

	  extra calculation can cost quite some time, so you can disable

	  it here. The emulator will then "only" calculate with a 64 bit

	  mantissa and round slightly incorrect, what is more than enough

	  for normal usage.



config M68KFPU_EMU_ONLY

	bool "Math emulation only kernel"

	depends on M68KFPU_EMU

	help

	  This option prevents any floating-point instructions from being

	  compiled into the kernel, thereby the kernel doesn't save any

	  floating point context anymore during task switches, so this

	  kernel will only be usable on machines without a floating-point

	  math coprocessor. This makes the kernel a bit faster as no tests

	  needs to be executed whether a floating-point instruction in the

	  kernel should be executed or not.



config ADVANCED

	bool "Advanced configuration options"

	---help---

	  This gives you access to some advanced options for the CPU. The

	  defaults should be fine for most users, but these options may make

	  it possible for you to improve performance somewhat if you know what

	  you are doing.



	  Note that the answer to this question won't directly affect the

	  kernel: saying N will just cause the configurator to skip all

	  the questions about these options.



	  Most users should say N to this question.



config RMW_INSNS

	bool "Use read-modify-write instructions"

	depends on ADVANCED

	---help---

	  This allows to use certain instructions that work with indivisible

	  read-modify-write bus cycles. While this is faster than the

	  workaround of disabling interrupts, it can conflict with DMA

	  ( = direct memory access) on many Amiga systems, and it is also said

	  to destabilize other machines. It is very likely that this will

	  cause serious problems on any Amiga or Atari Medusa if set. The only

	  configuration where it should work are 68030-based Ataris, where it

	  apparently improves performance. But you've been warned! Unless you

	  really know what you are doing, say N. Try Y only if you're quite

	  adventurous.



config SINGLE_MEMORY_CHUNK

	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3

	default y if SUN3

	select NEED_MULTIPLE_NODES

	help

	  Ignore all but the first contiguous chunk of physical memory for VM

	  purposes.  This will save a few bytes kernel size and may speed up

	  some operations.  Say N if not sure.

menu "Platform dependent setup"



config 060_WRITETHROUGH

	bool "Use write-through caching for 68060 supervisor accesses"

	depends on ADVANCED && M68060

	---help---

	  The 68060 generally uses copyback caching of recently accessed data.

	  Copyback caching means that memory writes will be held in an on-chip

	  cache and only written back to memory some time later.  Saying Y

	  here will force supervisor (kernel) accesses to use writethrough

	  caching.  Writethrough caching means that data is written to memory

	  straight away, so that cache and memory data always agree.

	  Writethrough caching is less efficient, but is needed for some

	  drivers on 68060 based systems where the 68060 bus snooping signal

	  is hardwired on.  The 53c710 SCSI driver is known to suffer from

	  this problem.



config ARCH_DISCONTIGMEM_ENABLE

	def_bool !SINGLE_MEMORY_CHUNK



config NODES_SHIFT

	int

	default "3"

	depends on !SINGLE_MEMORY_CHUNK

if MMU

source arch/m68k/Kconfig.mmu

endif

if !MMU

source arch/m68k/Kconfig.nommu

endif



source "mm/Kconfig"



endmenu



menu "General setup"

menu "Executable file formats"



source "fs/Kconfig.binfmt"



config ZORRO

	bool "Amiga Zorro (AutoConfig) bus support"

	depends on AMIGA

	help

	  This enables support for the Zorro bus in the Amiga. If you have

	  expansion cards in your Amiga that conform to the Amiga

	  AutoConfig(tm) specification, say Y, otherwise N. Note that even

	  expansion cards that do not fit in the Zorro slots but fit in e.g.

	  the CPU slot may fall in this category, so you have to say Y to let

	  Linux use these.



config AMIGA_PCMCIA

	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"

	depends on AMIGA && EXPERIMENTAL

	help

	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga

	  600. If you intend to use pcmcia cards say Y; otherwise say N.



config STRAM_PROC

	bool "ST-RAM statistics in /proc"

	depends on ATARI

	help

	  Say Y here to report ST-RAM usage statistics in /proc/stram.

endmenu



config HEARTBEAT

	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40

	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300

	help

	  Use the power-on LED on your machine as a load meter.  The exact

	  behavior is platform-dependent, but normally the flash frequency is

	  a hyperbolic function of the 5-minute load average.

if !MMU

menu "Power management options"



# We have a dedicated heartbeat LED. :-)

config PROC_HARDWARE

	bool "/proc/hardware support"

config PM

        bool "Power Management support"

        help

	  Say Y here to support the /proc/hardware file, which gives you

	  access to information about the machine you're running on,

	  including the model, CPU, MMU, clock speed, BogoMIPS rating,

	  and memory size.



config ISA

	bool

	depends on Q40 || AMIGA_PCMCIA

	default y

	help

	  Find out whether you have ISA slots on your motherboard.  ISA is the

	  name of a bus system, i.e. the way the CPU talks to the other stuff

	  inside your box.  Other bus systems are PCI, EISA, MicroChannel

	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;

	  newer boards don't support it.  If you have ISA, say Y, otherwise N.



config GENERIC_ISA_DMA

	bool

	depends on Q40 || AMIGA_PCMCIA

	default y



config ZONE_DMA

	bool

	default y



source "drivers/pci/Kconfig"



source "drivers/zorro/Kconfig"

          Support processor power management modes



endmenu

endif



source "net/Kconfig"



source "drivers/Kconfig"



if MMU



menu "Character devices"



config ATARI_MFPSER
@@ -627,6 +235,8 @@ config SERIAL_CONSOLE 


endmenu



endif



source "fs/Kconfig"



source "arch/m68k/Kconfig.debug"

arch/m68k/Kconfig.debug

+34 −0
Original line number Diff line number Diff line
@@ -2,4 +2,38 @@ menu "Kernel hacking" 


source "lib/Kconfig.debug"



if !MMU



config FULLDEBUG

	bool "Full Symbolic/Source Debugging support"

	help

	  Enable debugging symbols on kernel build.



config HIGHPROFILE

	bool "Use fast second timer for profiling"

	depends on COLDFIRE

	help

	  Use a fast secondary clock to produce profiling information.



config BOOTPARAM

	bool 'Compiled-in Kernel Boot Parameter'



config BOOTPARAM_STRING

	string 'Kernel Boot Parameter'

	default 'console=ttyS0,19200'

	depends on BOOTPARAM



config NO_KERNEL_MSG

	bool "Suppress Kernel BUG Messages"

	help

	  Do not output any debug BUG messages within the kernel.



config BDM_DISABLE

	bool "Disable BDM signals"

	depends on (EXPERIMENTAL && COLDFIRE)

	help

	  Disable the ColdFire CPU's BDM signals.



endif



endmenu

arch/m68k/Kconfig.mmu

0 → 100644
+417 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/m68knommu/Kconfig→arch/m68k/Kconfig.nommu

+0 −94
Original line number Diff line number Diff line 
config M68K

	bool

	default y

	select HAVE_IDE

	select HAVE_GENERIC_HARDIRQS

	select GENERIC_HARDIRQS_NO_DEPRECATED



config MMU

	bool

	default n



config NO_DMA

	bool

	depends on !COLDFIRE

	default y



config FPU

	bool

	default n



config ZONE_DMA

	bool

	default y



config RWSEM_GENERIC_SPINLOCK

	bool

	default y



config RWSEM_XCHGADD_ALGORITHM

	bool

	default n



config ARCH_HAS_ILOG2_U32

	bool

	default n



config ARCH_HAS_ILOG2_U64

	bool

	default n



config GENERIC_FIND_NEXT_BIT

	bool

	default y
@@ -46,29 +10,14 @@ config GENERIC_GPIO 
	bool

	default n



config GENERIC_HWEIGHT

	bool

	default y



config GENERIC_CALIBRATE_DELAY

	bool

	default y



config GENERIC_CMOS_UPDATE

	bool

	default y



config TIME_LOW_RES

	bool

	default y



config GENERIC_CLOCKEVENTS

	bool

	default n



config NO_IOPORT

	def_bool y



config COLDFIRE_SW_A7

	bool

	default n
@@ -85,12 +34,6 @@ config HAVE_MBAR 
config HAVE_IPSBAR

	bool



source "init/Kconfig"



source "kernel/Kconfig.freezer"



menu "Processor type and features"



choice

	prompt "CPU"

	default M68EZ328
@@ -630,11 +573,6 @@ config 4KSTACKS 
	  running more threads on a system and also reduces the pressure

	  on the VM subsystem for higher order allocations.



config HZ

	int

	default 1000 if CLEOPATRA

	default 100



comment "RAM configuration"



config RAMBASE
@@ -803,10 +741,6 @@ endif 


source "kernel/time/Kconfig"



source "mm/Kconfig"



endmenu



config ISA_DMA_API

	bool

	depends on !M5272
@@ -814,31 +748,3 @@ config ISA_DMA_API 


source "drivers/pcmcia/Kconfig"

menu "Executable file formats"



source "fs/Kconfig.binfmt"



endmenu



menu "Power management options"



config PM

	bool "Power Management support"

	help

	  Support processor power management modes



endmenu



source "net/Kconfig"



source "drivers/Kconfig"



source "fs/Kconfig"



source "arch/m68knommu/Kconfig.debug"



source "security/Kconfig"



source "crypto/Kconfig"



source "lib/Kconfig"

arch/m68k/Makefile

+3 −119
Original line number Diff line number Diff line 
#

# m68k/Makefile

#

# This file is included by the global makefile so that you can add your own

# architecture-specific flags and dependencies. Remember to do have actions

# for "archclean" and "archdep" for cleaning up and making dependencies for

# this architecture

#

# This file is subject to the terms and conditions of the GNU General Public

# License.  See the file "COPYING" in the main directory of this archive

# for more details.

#

# Copyright (C) 1994 by Hamish Macdonald

#



KBUILD_DEFCONFIG := multi_defconfig



# override top level makefile

AS += -m68020

LDFLAGS := -m m68kelf

KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds

ifneq ($(SUBARCH),$(ARCH))

	ifeq ($(CROSS_COMPILE),)

		CROSS_COMPILE := $(call cc-cross-prefix, \

			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)

	endif

endif



ifdef CONFIG_SUN3

LDFLAGS_vmlinux = -N

endif



CHECKFLAGS += -D__mc68000__



# without -fno-strength-reduce the 53c7xx.c driver fails ;-(

KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2



# enable processor switch if compiled only for a single cpu

ifndef CONFIG_M68020

ifndef CONFIG_M68030



ifndef CONFIG_M68060

KBUILD_CFLAGS += -m68040

endif



ifndef CONFIG_M68040

KBUILD_CFLAGS += -m68060

endif



endif

endif



ifdef CONFIG_KGDB

# If configured for kgdb support, include debugging infos and keep the

# frame pointer

KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g

endif



ifndef CONFIG_SUN3

head-y := arch/m68k/kernel/head.o

ifdef CONFIG_MMU

include $(srctree)/arch/m68k/Makefile_mm

else

head-y := arch/m68k/kernel/sun3-head.o

include $(srctree)/arch/m68k/Makefile_no

endif
 


core-y				+= arch/m68k/kernel/	arch/m68k/mm/

libs-y				+= arch/m68k/lib/



core-$(CONFIG_Q40)		+= arch/m68k/q40/

core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/

core-$(CONFIG_ATARI)		+= arch/m68k/atari/

core-$(CONFIG_MAC)		+= arch/m68k/mac/

core-$(CONFIG_HP300)		+= arch/m68k/hp300/

core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/

core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/

core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/

core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/

core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/

core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/

core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/

core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/

core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/

core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/



all:	zImage



lilo:	vmlinux

	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi

	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi

	cat vmlinux > $(INSTALL_PATH)/vmlinux

	cp System.map $(INSTALL_PATH)/System.map

	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi



zImage compressed: vmlinux.gz



vmlinux.gz: vmlinux



ifndef CONFIG_KGDB

	cp vmlinux vmlinux.tmp

	$(STRIP) vmlinux.tmp

	gzip -9c vmlinux.tmp >vmlinux.gz

	rm vmlinux.tmp

else

	gzip -9c vmlinux >vmlinux.gz

endif



bzImage: vmlinux.bz2



vmlinux.bz2: vmlinux



ifndef CONFIG_KGDB

	cp vmlinux vmlinux.tmp

	$(STRIP) vmlinux.tmp

	bzip2 -1c vmlinux.tmp >vmlinux.bz2

	rm vmlinux.tmp

else

	bzip2 -1c vmlinux >vmlinux.bz2

endif



archclean:

	rm -f vmlinux.gz vmlinux.bz2



install:

	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"

CRA Git | Maintained and supported by SUSTech CRA and CCSE