ARM: dts: stm32: Enable SDIO controller on stm32f469 disco board (64348d9f) · Commits · 戴 / test

This patch adds SDIO-related DT nodes required by stm32f469 board There is a hardware issue on these boards, it misses a pullup on the GPIO line used as card detect to allow correct SD card detection. To allow correct card detection "broken-cd" property is used. Signed-off-by:

Andrea Merello <andrea.merello@gmail.com> Signed-off-by:

Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:

Patrice Chotard <patrice.chotard@st.com> Signed-off-by:

Alexandre Torgue <alexandre.torgue@st.com>

arch/arm/boot/dts/stm32f469-disco.dts

+20 −0

Original line number	Diff line number	Diff line
		@@ -48,6 +48,7 @@
		/dts-v1/;
		#include "stm32f429.dtsi"
		#include "stm32f469-pinctrl.dtsi"
		#include <dt-bindings/gpio/gpio.h>

		/ {
		model = "STMicroelectronics STM32F469i-DISCO board";
		@@ -66,6 +67,13 @@
		serial0 = &usart3;
		};

		mmc_vcard: mmc_vcard {
		compatible = "regulator-fixed";
		regulator-name = "mmc_vcard";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		};

		soc {
		dma-ranges = <0xc0000000 0x0 0x10000000>;
		};
		@@ -120,6 +128,18 @@
		};
		};

		&sdio {
		status = "okay";
		vmmc-supply = <&mmc_vcard>;
		cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
		cd-inverted;
		broken-cd;
		pinctrl-names = "default", "opendrain";
		pinctrl-0 = <&sdio_pins>;
		pinctrl-1 = <&sdio_pins_od>;
		bus-width = <4>;
		};

		&usart3 {
		pinctrl-0 = <&usart3_pins_a>;
		pinctrl-names = "default";

Admin message