Commit 629ae88e authored by Emilio López's avatar Emilio López Committed by Maxime Ripard
Browse files

ARM: sunxi: dt: Add device tree for Mele A1000 



This adds a device tree usable on Mele A1000 (and A2000, as it
apparently is the same device except for the case). This device features
one UART port, Ethernet, an AXP209 PMU on i2c0 and two user configurable
LEDs.

Signed-off-by: default avatarEmilio López <emilio@elopez.com.ar>
[maxime: fixed the soc node address]
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 278fe8b8

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -206,6 +206,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ 
	stih415-b2020.dtb \

	stih416-b2020.dtb

dtb-$(CONFIG_ARCH_SUNXI) += \

	sun4i-a10-a1000.dtb \

	sun4i-a10-cubieboard.dtb \

	sun4i-a10-mini-xplus.dtb \

	sun4i-a10-hackberry.dtb \

arch/arm/boot/dts/sun4i-a10-a1000.dts

0 → 100644
+101 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2013 Emilio López

 *

 * Emilio López <emilio@elopez.com.ar>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

/include/ "sun4i-a10.dtsi"



/ {

	model = "Mele A1000";

	compatible = "mele,a1000", "allwinner,sun4i-a10";



	aliases {

		serial0 = &uart0;

	};



	soc@01c00000 {

		emac: ethernet@01c0b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&emac_pins_a>;

			phy = <&phy1>;

			status = "okay";

		};



		mdio@01c0b080 {

			phy-supply = <&reg_emac_3v3>;

			status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};



		pinctrl@01c20800 {

			emac_power_pin_a1000: emac_power_pin@0 {

				allwinner,pins = "PH15";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};



			led_pins_a1000: led_pins@0 {

				allwinner,pins = "PH10", "PH20";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

			status = "okay";

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_a1000>;



		red {

			label = "a1000:red:usr";

			gpios = <&pio 7 10 0>;

		};



		blue {

			label = "a1000:blue:usr";

			gpios = <&pio 7 20 0>;

		};

	};



	regulators {

		compatible = "simple-bus";



		reg_emac_3v3: emac-3v3 {

			compatible = "regulator-fixed";

			pinctrl-names = "default";

			pinctrl-0 = <&emac_power_pin_a1000>;

			regulator-name = "emac-3v3";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			enable-active-high;

			gpio = <&pio 7 15 0>;

		};

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE