Commit 6281100e authored by Chanwoo Choi's avatar Chanwoo Choi
Browse files

dt-bindings: extcon: Add support for Richtek RT8973A MUIC device 



This patch add documentation for binding of Richtek RT8973A (Micro USB Switch)
device which is using EXTCON subsystem. The RT8973A device can detect various
external accessories when external accessories is attached or detached.

Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Acked-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
parent c03e017c

Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt

0 → 100644
+25 −0
Original line number Diff line number Diff line 


* Richtek RT8973A - Micro USB Switch device



The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A

is a USB port accessory detector and switch that is optimized to protect low

voltage system from abnormal high input voltage (up to 28V) and supports high

speed USB operation. Also, RT8973A support 'auto-configuration' mode.

If auto-configuration mode is enabled, RT8973A would control internal h/w patch

for USB D-/D+ switching.



Required properties:

- compatible: Should be "richtek,rt8973a-muic"

- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14

- interrupt-parent: Specifies the phandle of the interrupt controller to which

  the interrupts from rt8973a are delivered to.

- interrupts: Interrupt specifiers for detection interrupt sources.



Example:



	rt8973a@14 {

		compatible = "richtek,rt8973a-muic";

		interrupt-parent = <&gpx1>;

		interrupts = <5 0>;

		reg = <0x14>;

	};

CRA Git | Maintained and supported by SUSTech CRA and CCSE