Commit 61e33120 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'iio-for-v4.2b' of... 

Merge tag 'iio-for-v4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.

Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
  ones.

Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
  a hideously evolved function.

New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
  will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer.  The accelerometer in the same package has been supported
  for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.

Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
  Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
  intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
  coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
  averaging.  The ideal settings for these tend to be board design specific.
parents 936a0cd5 884ca456

Documentation/ABI/testing/sysfs-bus-iio

+88 −0
Original line number Diff line number Diff line
@@ -71,6 +71,8 @@ Description: 


What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw

KernelVersion:	2.6.35

Contact:	linux-iio@vger.kernel.org

Description:
@@ -81,6 +83,11 @@ Description: 
		unique to allow association with event codes. Units after

		application of scale and offset are millivolts.



		Channels with 'i' and 'q' modifiers always exist in pairs and both

		channels refer to the same signal. The 'i' channel contains the in-phase

		component of the signal while the 'q' channel contains the quadrature

		component.



What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw

KernelVersion:	2.6.35

Contact:	linux-iio@vger.kernel.org
@@ -246,8 +253,16 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset 
What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_current_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset

What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
@@ -273,14 +288,22 @@ Description: 
		to the _raw output.



What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale

What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_current_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -328,6 +351,10 @@ Description: 


What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale

What		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -420,6 +447,16 @@ Description: 
		to the underlying data channel, then this parameter

		gives the 3dB frequency of the filter in Hz.



What:		/sys/.../in_accel_filter_high_pass_3db_frequency

What:		/sys/.../in_anglvel_filter_high_pass_3db_frequency

What:		/sys/.../in_magn_filter_high_pass_3db_frequency

KernelVersion:	4.2

Contact:	linux-iio@vger.kernel.org

Description:

		If a known or controllable high pass filter is applied

		to the underlying data channel, then this parameter

		gives the 3dB frequency of the filter in Hz.



What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw

KernelVersion:	2.6.37
@@ -880,6 +917,26 @@ Description: 
		met before an event is generated. If direction is not

		specified then this period applies to both directions.



What:		/sys/.../events/in_accel_thresh_rising_low_pass_filter_3db

What:		/sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db

What:		/sys/.../events/in_magn_thresh_rising_low_pass_filter_3db

KernelVersion:	4.2

Contact:	linux-iio@vger.kernel.org

Description:

		If a low pass filter can be applied to the event generation

		this property gives its 3db frequency in Hz.

		A value of zero disables the filter.



What:		/sys/.../events/in_accel_thresh_rising_high_pass_filter_3db

What:		/sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db

What:		/sys/.../events/in_magn_thresh_rising_high_pass_filter_3db

KernelVersion:	4.2

Contact:	linux-iio@vger.kernel.org

Description:

		If a high pass filter can be applied to the event generation

		this property gives its 3db frequency in Hz.

		A value of zero disables the filter.



What:		/sys/.../events/in_activity_still_thresh_rising_en

What:		/sys/.../events/in_activity_still_thresh_falling_en

What:		/sys/.../events/in_activity_walking_thresh_rising_en
@@ -1016,6 +1073,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en 
What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en

What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en

What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en

What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
@@ -1034,6 +1095,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_incli_type 
What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type

What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type

What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type

What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
@@ -1071,6 +1136,10 @@ Description: 


What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index

What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index

What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index

What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index

What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index

What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
@@ -1230,6 +1299,8 @@ Description: 
		or without compensation from tilt sensors.



What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_raw

What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw

What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw

KernelVersion:	3.18

Contact:	linux-iio@vger.kernel.org

Description:
@@ -1238,6 +1309,11 @@ Description: 
		present, output should be considered as processed with the

		unit in milliamps.



		Channels with 'i' and 'q' modifiers always exist in pairs and both

		channels refer to the same signal. The 'i' channel contains the in-phase

		component of the signal while the 'q' channel contains the quadrature

		component.



What:		/sys/.../iio:deviceX/in_energy_en

What:		/sys/.../iio:deviceX/in_distance_en

What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en
@@ -1375,3 +1451,15 @@ Description: 
		The emissivity ratio of the surface in the field of view of the

		contactless temperature sensor.  Emissivity varies from 0 to 1,

		with 1 being the emissivity of a black body.



What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio

What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio

What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio

KernelVersion:	4.2

Contact:	linux-iio@vger.kernel.org

Description:

		Hardware applied number of measurements for acquiring one

		data point. The HW will do <type>[_name]_oversampling_ratio

		measurements and return the average value as output data. Each

		value resulted from <type>[_name]_oversampling_ratio measurements

		is considered as one sample for <type>[_name]_sampling_frequency.

Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt

0 → 100644
+19 −0
Original line number Diff line number Diff line 
* Berlin Analog to Digital Converter (ADC)



The Berlin ADC has 8 channels, with one connected to a temperature sensor.

It is part of the system controller register set. The ADC node should be a

sub-node of the system controller node.



Required properties:

- compatible: must be "marvell,berlin2-adc"

- interrupts: the interrupts for the ADC and the temperature sensor

- interrupt-names: should be "adc" and "tsen"



Example:



adc: adc {

	compatible = "marvell,berlin2-adc";

	interrupt-parent = <&sic>;

	interrupts = <12>, <14>;

	interrupt-names = "adc", "tsen";

};

Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt

+2 −2
Original line number Diff line number Diff line 
* Texas Instruments' ADC128S052 ADC chip

* Texas Instruments' ADC128S052 and ADC122S021 ADC chip



Required properties:

 - compatible: Should be "ti,adc128s052"

 - compatible: Should be "ti,adc128s052" or "ti,adc122s021"

 - reg: spi chip select number for the device

 - vref-supply: The regulator supply for ADC reference voltage

Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt

0 → 100644
+17 −0
Original line number Diff line number Diff line 
InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device



http://www.invensense.com/mems/gyro/mpu6050.html



Required properties:

 - compatible : should be "invensense,mpu6050"

 - reg : the I2C address of the sensor

 - interrupt-parent : should be the phandle for the interrupt controller

 - interrupts : interrupt mapping for GPIO IRQ



Example:

	mpu6050@68 {

		compatible = "invensense,mpu6050";

		reg = <0x68>;

		interrupt-parent = <&gpio1>;

		interrupts = <18 1>;

	};

Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt

0 → 100644
+22 −0
Original line number Diff line number Diff line 
* Bosch BMC150 magnetometer sensor



http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf



Required properties:



  - compatible : should be "bosch,bmc150_magn"

  - reg : the I2C address of the magnetometer



Optional properties:



  - interrupt-parent : phandle to the parent interrupt controller

  - interrupts : interrupt mapping for GPIO IRQ



Example:



bmc150_magn@12 {

        compatible = "bosch,bmc150_magn";

        reg = <0x12>;

        interrupt-parent = <&gpio1>;

        interrupts = <0 1>;

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE