Commit 61550022 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next 



Marc Kleine-Budde says:

====================
this is a pull-request for net-next/master. There is are 9 patches by
Fabio Baltieri and Kurt Van Dijck which add LED infrastructure and
support for CAN devices. Bernd Krumboeck adds a driver for the USB CAN
adapter from 8 devices. Oliver Hartkopp improves the CAN gateway
functionality. There are 4 patches by me, which clean up the CAN's
Kconfig.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 0e36cbb3 e6afa00a

drivers/net/can/Kconfig

+23 −14
Original line number Diff line number Diff line 
menu "CAN Device Drivers"

	depends on CAN



config CAN_VCAN

	tristate "Virtual Local CAN Interface (vcan)"

	depends on CAN

	---help---

	  Similar to the network loopback devices, vcan offers a

	  virtual local CAN interface.
@@ -13,7 +11,6 @@ config CAN_VCAN 


config CAN_SLCAN

	tristate "Serial / USB serial CAN Adaptors (slcan)"

	depends on CAN

	---help---

	  CAN driver for several 'low cost' CAN interfaces that are attached

	  via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -33,16 +30,16 @@ config CAN_SLCAN 


config CAN_DEV

	tristate "Platform CAN drivers with Netlink support"

	depends on CAN

	default y

	---help---

	  Enables the common framework for platform CAN drivers with Netlink

	  support. This is the standard library for CAN drivers.

	  If unsure, say Y.



if CAN_DEV



config CAN_CALC_BITTIMING

	bool "CAN bit-timing calculation"

	depends on CAN_DEV

	default y

	---help---

	  If enabled, CAN bit-timing parameters will be calculated for the
@@ -54,15 +51,26 @@ config CAN_CALC_BITTIMING 
	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".

	  If unsure, say Y.



config CAN_LEDS

	bool "Enable LED triggers for Netlink based drivers"

	depends on LEDS_CLASS

	select LEDS_TRIGGERS

	---help---

	  This option adds two LED triggers for packet receive and transmit

	  events on each supported CAN device.



	  Say Y here if you are working on a system with led-class supported

	  LEDs and you want to use them as canbus activity indicators.



config CAN_AT91

	tristate "Atmel AT91 onchip CAN controller"

	depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5)

	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5

	---help---

	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263

	  and AT91SAM9X5 processors.



config CAN_TI_HECC

	depends on CAN_DEV && ARCH_OMAP3

	depends on ARCH_OMAP3

	tristate "TI High End CAN Controller"

	---help---

	  Driver for TI HECC (High End CAN Controller) module found on many
@@ -70,12 +78,12 @@ config CAN_TI_HECC 


config CAN_MCP251X

	tristate "Microchip MCP251x SPI CAN controllers"

	depends on CAN_DEV && SPI && HAS_DMA

	depends on SPI && HAS_DMA

	---help---

	  Driver for the Microchip MCP251x SPI CAN controllers.



config CAN_BFIN

	depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x)

	depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x

	tristate "Analog Devices Blackfin on-chip CAN"

	---help---

	  Driver for the Analog Devices Blackfin on-chip CAN controllers
@@ -85,7 +93,7 @@ config CAN_BFIN 


config CAN_JANZ_ICAN3

	tristate "Janz VMOD-ICAN3 Intelligent CAN controller"

	depends on CAN_DEV && MFD_JANZ_CMODIO

	depends on MFD_JANZ_CMODIO

	---help---

	  Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which

	  connects to a MODULbus carrier board.
@@ -98,13 +106,13 @@ config HAVE_CAN_FLEXCAN 


config CAN_FLEXCAN

	tristate "Support for Freescale FLEXCAN based chips"

	depends on CAN_DEV && HAVE_CAN_FLEXCAN

	depends on HAVE_CAN_FLEXCAN

	---help---

	  Say Y here if you want to support for Freescale FlexCAN.



config PCH_CAN

	tristate "Intel EG20T PCH CAN controller"

	depends on CAN_DEV && PCI

	depends on PCI

	---help---

	  This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which

	  is an IOH for x86 embedded processor (Intel Atom E6xx series).
@@ -112,7 +120,7 @@ config PCH_CAN 


config CAN_GRCAN

	tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"

	depends on CAN_DEV && OF

	depends on OF

	---help---

	  Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.

	  Note that the driver supports little endian, even though little
@@ -131,9 +139,10 @@ source "drivers/net/can/usb/Kconfig" 


source "drivers/net/can/softing/Kconfig"



endif



config CAN_DEBUG_DEVICES

	bool "CAN devices debugging messages"

	depends on CAN

	---help---

	  Say Y here if you want the CAN device drivers to produce a bunch of

	  debug messages to the system log.  Select this if you are having

drivers/net/can/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -8,6 +8,8 @@ obj-$(CONFIG_CAN_SLCAN) += slcan.o 
obj-$(CONFIG_CAN_DEV)		+= can-dev.o

can-dev-y			:= dev.o



can-dev-$(CONFIG_CAN_LEDS)	+= led.o



obj-y				+= usb/

obj-y				+= softing/

drivers/net/can/at91_can.c

+10 −0
Original line number Diff line number Diff line
@@ -37,6 +37,7 @@ 


#include <linux/can/dev.h>

#include <linux/can/error.h>

#include <linux/can/led.h>



#define AT91_MB_MASK(i)		((1 << (i)) - 1)
@@ -641,6 +642,8 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) 


	stats->rx_packets++;

	stats->rx_bytes += cf->can_dlc;



	can_led_event(dev, CAN_LED_EVENT_RX);

}



/**
@@ -875,6 +878,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr) 
			/* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */

			can_get_echo_skb(dev, mb - get_mb_tx_first(priv));

			dev->stats.tx_packets++;

			can_led_event(dev, CAN_LED_EVENT_TX);

		}

	}
@@ -1128,6 +1132,8 @@ static int at91_open(struct net_device *dev) 
		goto out_close;

	}



	can_led_event(dev, CAN_LED_EVENT_OPEN);



	/* start chip and queuing */

	at91_chip_start(dev);

	napi_enable(&priv->napi);
@@ -1159,6 +1165,8 @@ static int at91_close(struct net_device *dev) 


	close_candev(dev);



	can_led_event(dev, CAN_LED_EVENT_STOP);



	return 0;

}
@@ -1321,6 +1329,8 @@ static int at91_can_probe(struct platform_device *pdev) 
		goto exit_free;

	}



	devm_can_led_init(dev);



	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",

		 priv->reg_base, dev->irq);

drivers/net/can/c_can/Kconfig

+1 −1
Original line number Diff line number Diff line 
menuconfig CAN_C_CAN

	tristate "Bosch C_CAN/D_CAN devices"

	depends on CAN_DEV && HAS_IOMEM

	depends on HAS_IOMEM



if CAN_C_CAN

drivers/net/can/c_can/c_can.c

+10 −0
Original line number Diff line number Diff line
@@ -39,6 +39,7 @@ 
#include <linux/can.h>

#include <linux/can/dev.h>

#include <linux/can/error.h>

#include <linux/can/led.h>



#include "c_can.h"
@@ -477,6 +478,8 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) 
	stats->rx_packets++;

	stats->rx_bytes += frame->can_dlc;



	can_led_event(dev, CAN_LED_EVENT_RX);



	return 0;

}
@@ -751,6 +754,7 @@ static void c_can_do_tx(struct net_device *dev) 
					C_CAN_IFACE(MSGCTRL_REG, 0))

					& IF_MCONT_DLC_MASK;

			stats->tx_packets++;

			can_led_event(dev, CAN_LED_EVENT_TX);

			c_can_inval_msg_object(dev, 0, msg_obj_no);

		} else {

			break;
@@ -1115,6 +1119,8 @@ static int c_can_open(struct net_device *dev) 


	napi_enable(&priv->napi);



	can_led_event(dev, CAN_LED_EVENT_OPEN);



	/* start the c_can controller */

	c_can_start(dev);
@@ -1143,6 +1149,8 @@ static int c_can_close(struct net_device *dev) 
	c_can_reset_ram(priv, false);

	c_can_pm_runtime_put_sync(priv);



	can_led_event(dev, CAN_LED_EVENT_STOP);



	return 0;

}
@@ -1268,6 +1276,8 @@ int register_c_can_dev(struct net_device *dev) 
	err = register_candev(dev);

	if (err)

		c_can_pm_runtime_disable(priv);

	else

		devm_can_led_init(dev);



	return err;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE