Commit 5f738967 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 

Pull pinctrl fixes from Linus Walleij:
 "A first round of pinctrl fixes for v3.8:
   - i.MX5 register configuration
   - Swap a kfree to devm_kfree() to avoid memory corruption in the at91
     driver
   - Add the missing device tree binding doc for the SIRF pin controller
   - Enable the SIRF GPIO pull up/down configuration from the device
     tree, it was previously retired from the hard-coded approach.
   - NULL check for the prcm_base in the Nomadik pin controller.
   - Provide the prcm_base from the device tree in the DT boot path for
     the Nomadik pin controller."

* tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  ARM: ux500: add pinctrl address resources
  pinctrl: nomadik: return if prcm_base is NULL
  pinctrl: sirf: enable GPIO pullup/down configuration from dts
  pinctrl: sirf: add missing DT-binding document
  pinctrl: fix comment mistake
  drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree
  pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
parents 2318aa27 9fcb4cc2

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

0 → 100644
+47 −0
Original line number Diff line number Diff line 
CSR SiRFprimaII pinmux controller



Required properties:

- compatible	: "sirf,prima2-pinctrl"

- reg		: Address range of the pinctrl registers

- interrupts    : Interrupts used by every GPIO group

- gpio-controller : Indicates this device is a GPIO controller

- interrupt-controller  : Marks the device node as an interrupt controller

Optional properties:

- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m

- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m



Please refer to pinctrl-bindings.txt in this directory for details of the common

pinctrl bindings used by client devices.



SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.

Each of these subnodes represents some desired configuration for a group of pins.



Required subnode-properties:

- sirf,pins : An array of strings. Each string contains the name of a group.

- sirf,function: A string containing the name of the function to mux to the

  group.



  Valid values for group and function names can be found from looking at the

  group and function arrays in driver files:

  drivers/pinctrl/pinctrl-sirf.c



For example, pinctrl might have subnodes like the following:

 uart2_pins_a: uart2@0 {

         uart {

                 sirf,pins = "uart2grp";

                 sirf,function = "uart2";

         };

 };

 uart2_noflow_pins_a: uart2@1 {

         uart {

                 sirf,pins = "uart2_nostreamctrlgrp";

                 sirf,function = "uart2_nostreamctrl";

         };

 };



For a specific board, if it wants to use uart2 without hardware flow control,

it can add the following to its board-specific .dts file.

uart2: uart@0xb0070000 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_noflow_pins_a>;

}

arch/arm/boot/dts/dbx5x0.dtsi

+3 −1
Original line number Diff line number Diff line
@@ -170,7 +170,9 @@ 
			gpio-bank = <8>;

		};



		pinctrl {

		pinctrl@80157000 {

			// This is actually the PRCMU base address

			reg = <0x80157000 0x2000>;

			compatible = "stericsson,nmk_pinctrl";

		};

arch/arm/mach-ux500/cpu-db8500.c

+2 −1
Original line number Diff line number Diff line
@@ -285,7 +285,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { 
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),

	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),

	/* Requires device name bindings. */

	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),

	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,

		"pinctrl-db8500", NULL),

	/* Requires clock name and DMA bindings. */

	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,

		"ux500-msp-i2s.0", &msp0_platform_data),

drivers/pinctrl/core.c

+1 −1
Original line number Diff line number Diff line
@@ -700,7 +700,7 @@ static struct pinctrl *create_pinctrl(struct device *dev) 
		}

	}



	/* Add the pinmux to the global list */

	/* Add the pinctrl handle to the global list */

	list_add_tail(&p->node, &pinctrl_list);



	return p;

drivers/pinctrl/pinctrl-at91.c

+1 −1
Original line number Diff line number Diff line
@@ -265,7 +265,7 @@ static int at91_dt_node_to_map(struct pinctrl_dev *pctldev, 
	/* create mux map */

	parent = of_get_parent(np);

	if (!parent) {

		kfree(new_map);

		devm_kfree(pctldev->dev, new_map);

		return -EINVAL;

	}

	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;

CRA Git | Maintained and supported by SUSTech CRA and CCSE