Merge tag 'wireless-drivers-next-2020-03-24' of... (5ef8c665) · Commits · 戴 / test

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

+7 −0

Original line number	Diff line number	Diff line
		@@ -91,6 +91,11 @@ Optional properties:
		- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
		mapped msa region.

		- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
		support by the hardware.
		- qcom,coexist-gpio-pin : gpio pin number information to support coex
		which will be used by wifi firmware.

		Example (to supply PCI based wifi block details):

		In this example, the node is defined as child node of the PCI controller.
		@@ -159,6 +164,8 @@ wifi0: wifi@a000000 {
		qcom,msi_addr = <0x0b006040>;
		qcom,msi_base = <0x40>;
		qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
		qcom,coexist-support = <1>;
		qcom,coexist-gpio-pin = <0x33>;
		};

		Example (to supply wcn3990 SoC wifi block details):

drivers/net/wireless/admtek/adm8211.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -531,7 +531,7 @@ struct adm8211_eeprom {
		u8 lpf_cutoff[14]; /* 0x62 */
		u8 lnags_threshold[14]; /* 0x70 */
		__le16 checksum; /* 0x7E */
		u8 cis_data[0]; /* 0x80, 384 bytes */
		u8 cis_data[]; /* 0x80, 384 bytes */
		} __packed;

		struct adm8211_priv {

drivers/net/wireless/ath/ath10k/core.c

+81 −1

Original line number	Diff line number	Diff line
		@@ -540,6 +540,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
		.fw_diag_ce_download = true,
		.tx_stats_over_pktlog = false,
		},
		{
		.id = QCA9377_HW_1_1_DEV_VERSION,
		.dev_id = QCA9377_1_0_DEVICE_ID,
		.bus = ATH10K_BUS_SDIO,
		.name = "qca9377 hw1.1 sdio",
		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
		.uart_pin = 19,
		.otp_exe_param = 0,
		.channel_counters_freq_hz = 88000,
		.max_probe_resp_desc_thres = 0,
		.cal_data_len = 8124,
		.fw = {
		.dir = QCA9377_HW_1_0_FW_DIR,
		.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
		.board_size = QCA9377_BOARD_DATA_SZ,
		.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
		},
		.hw_ops = &qca6174_ops,
		.hw_clk = qca6174_clk,
		.target_cpu_freq = 176000000,
		.decap_align_bytes = 4,
		.n_cipher_suites = 8,
		.num_peers = TARGET_QCA9377_HL_NUM_PEERS,
		.ast_skid_limit = 0x10,
		.num_wds_entries = 0x20,
		.uart_pin_workaround = true,
		},
		{
		.id = QCA4019_HW_1_0_DEV_VERSION,
		.dev_id = 0,
		@@ -874,6 +901,13 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
		return -ENODATA;
		}

		if (ar->id.bmi_ids_valid) {
		ath10k_dbg(ar, ATH10K_DBG_BOOT,
		"boot already acquired valid otp board id,skip download, board_id %d chip_id %d\n",
		ar->id.bmi_board_id, ar->id.bmi_chip_id);
		goto skip_otp_download;
		}

		ath10k_dbg(ar, ATH10K_DBG_BOOT,
		"boot upload otp to 0x%x len %zd for board id\n",
		address, ar->normal_mode_fw.fw_file.otp_len);
		@@ -921,6 +955,8 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
		ar->id.bmi_board_id = board_id;
		ar->id.bmi_chip_id = chip_id;

		skip_otp_download:

		return 0;
		}

		@@ -2119,6 +2155,40 @@ done:
		return 0;
		}

		static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
		{
		struct device_node *node;
		u8 coex_support = 0;
		int ret;

		node = ar->dev->of_node;
		if (!node)
		goto out;

		ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
		if (ret) {
		ar->coex_support = true;
		goto out;
		}

		if (coex_support) {
		ar->coex_support = true;
		} else {
		ar->coex_support = false;
		ar->coex_gpio_pin = -1;
		goto out;
		}

		ret = of_property_read_u32(node, "qcom,coexist-gpio-pin",
		&ar->coex_gpio_pin);
		if (ret)
		ar->coex_gpio_pin = -1;

		out:
		ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n",
		ar->coex_support, ar->coex_gpio_pin);
		}

		static int ath10k_init_uart(struct ath10k *ar)
		{
		int ret;
		@@ -2696,14 +2766,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
		if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
		val \|= WMI_10_4_BSS_CHANNEL_INFO_64;

		ath10k_core_fetch_btcoex_dt(ar);

		/* 10.4 firmware supports BT-Coex without reloading firmware
		* via pdev param. To support Bluetooth coexistence pdev param,
		* WMI_COEX_GPIO_SUPPORT of extended resource config should be
		* enabled always.
		*
		* We can still enable BTCOEX if firmware has the support
		* eventhough btceox_support value is
		* ATH10K_DT_BTCOEX_NOT_FOUND
		*/

		if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
		test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
		ar->running_fw->fw_file.fw_features))
		ar->running_fw->fw_file.fw_features) &&
		ar->coex_support)
		val \|= WMI_10_4_COEX_GPIO_SUPPORT;

		if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
		@@ -2863,6 +2941,8 @@ void ath10k_core_stop(struct ath10k *ar)
		ath10k_htt_tx_stop(&ar->htt);
		ath10k_htt_rx_free(&ar->htt);
		ath10k_wmi_detach(ar);

		ar->id.bmi_ids_valid = false;
		}
		EXPORT_SYMBOL(ath10k_core_stop);

drivers/net/wireless/ath/ath10k/core.h

+3 −0

Original line number	Diff line number	Diff line
		@@ -1222,6 +1222,9 @@ struct ath10k {
		struct ath10k_bus_params bus_param;
		struct completion peer_delete_done;

		bool coex_support;
		int coex_gpio_pin;

		/* must be last */
		u8 drv_priv[0] __aligned(sizeof(void *));
		};

drivers/net/wireless/ath/ath10k/debug.c

+7 −5

Original line number	Diff line number	Diff line
		@@ -1978,6 +1978,9 @@ static ssize_t ath10k_write_btcoex(struct file *file,
		if (strtobool(buf, &val) != 0)
		return -EINVAL;

		if (!ar->coex_support)
		return -EOPNOTSUPP;

		mutex_lock(&ar->conf_mutex);

		if (ar->state != ATH10K_STATE_ON &&
		@@ -2370,9 +2373,6 @@ static ssize_t ath10k_write_warm_hw_reset(struct file *file,
		goto exit;
		}

		if (!(test_bit(WMI_SERVICE_RESET_CHIP, ar->wmi.svc_map)))
		ath10k_warn(ar, "wmi service for reset chip is not available\n");

		ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pdev_reset,
		WMI_RST_MODE_WARM_RESET);

		@@ -2647,7 +2647,9 @@ int ath10k_debug_register(struct ath10k *ar)
		ar->debug.debugfs_phy, ar,
		&fops_tpc_stats_final);

		debugfs_create_file("warm_hw_reset", 0600, ar->debug.debugfs_phy, ar,
		if (test_bit(WMI_SERVICE_RESET_CHIP, ar->wmi.svc_map))
		debugfs_create_file("warm_hw_reset", 0600,
		ar->debug.debugfs_phy, ar,
		&fops_warm_hw_reset);

		debugfs_create_file("ps_state_enable", 0600, ar->debug.debugfs_phy, ar,

Admin message