iio: adc: Add Spreadtrum SC27XX PMICs ADC support (5df362a6) · Commits · 戴 / test

drivers/iio/adc/Kconfig

+10 −0

Original line number	Diff line number	Diff line
		@@ -620,6 +620,16 @@ config ROCKCHIP_SARADC
		To compile this driver as a module, choose M here: the
		module will be called rockchip_saradc.

		config SC27XX_ADC
		tristate "Spreadtrum SC27xx series PMICs ADC"
		depends on MFD_SC27XX_PMIC \|\| COMPILE_TEST
		help
		Say yes here to build support for the integrated ADC inside the
		Spreadtrum SC27xx series PMICs.

		This driver can also be built as a module. If so, the module
		will be called sc27xx_adc.

		config SPEAR_ADC
		tristate "ST SPEAr ADC"
		depends on PLAT_SPEAR \|\| COMPILE_TEST

drivers/iio/adc/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -59,6 +59,7 @@ obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
		obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
		obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
		obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
		obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
		obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
		obj-$(CONFIG_STX104) += stx104.o
		obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o

drivers/iio/adc/sc27xx_adc.c

0 → 100644

+522 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (C) 2018 Spreadtrum Communications Inc.

		#include <linux/hwspinlock.h>
		#include <linux/iio/iio.h>
		#include <linux/interrupt.h>
		#include <linux/module.h>
		#include <linux/of.h>
		#include <linux/of_device.h>
		#include <linux/platform_device.h>
		#include <linux/regmap.h>

		/* PMIC global registers definition */
		#define SC27XX_MODULE_EN 0xc08
		#define SC27XX_MODULE_ADC_EN BIT(5)
		#define SC27XX_ARM_CLK_EN 0xc10
		#define SC27XX_CLK_ADC_EN BIT(5)
		#define SC27XX_CLK_ADC_CLK_EN BIT(6)

		/* ADC controller registers definition */
		#define SC27XX_ADC_CTL 0x0
		#define SC27XX_ADC_CH_CFG 0x4
		#define SC27XX_ADC_DATA 0x4c
		#define SC27XX_ADC_INT_EN 0x50
		#define SC27XX_ADC_INT_CLR 0x54
		#define SC27XX_ADC_INT_STS 0x58
		#define SC27XX_ADC_INT_RAW 0x5c

		/* Bits and mask definition for SC27XX_ADC_CTL register */
		#define SC27XX_ADC_EN BIT(0)
		#define SC27XX_ADC_CHN_RUN BIT(1)
		#define SC27XX_ADC_12BIT_MODE BIT(2)
		#define SC27XX_ADC_RUN_NUM_MASK GENMASK(7, 4)
		#define SC27XX_ADC_RUN_NUM_SHIFT 4

		/* Bits and mask definition for SC27XX_ADC_CH_CFG register */
		#define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0)
		#define SC27XX_ADC_SCALE_MASK GENMASK(10, 8)
		#define SC27XX_ADC_SCALE_SHIFT 8

		/* Bits definitions for SC27XX_ADC_INT_EN registers */
		#define SC27XX_ADC_IRQ_EN BIT(0)

		/* Bits definitions for SC27XX_ADC_INT_CLR registers */
		#define SC27XX_ADC_IRQ_CLR BIT(0)

		/* Mask definition for SC27XX_ADC_DATA register */
		#define SC27XX_ADC_DATA_MASK GENMASK(11, 0)

		/* Timeout (ms) for the trylock of hardware spinlocks */
		#define SC27XX_ADC_HWLOCK_TIMEOUT 5000

		/* Maximum ADC channel number */
		#define SC27XX_ADC_CHANNEL_MAX 32

		/* ADC voltage ratio definition */
		#define SC27XX_VOLT_RATIO(n, d) \
		(((n) << SC27XX_RATIO_NUMERATOR_OFFSET) \| (d))
		#define SC27XX_RATIO_NUMERATOR_OFFSET 16
		#define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0)

		struct sc27xx_adc_data {
		struct device *dev;
		struct regmap *regmap;
		/*
		* One hardware spinlock to synchronize between the multiple
		* subsystems which will access the unique ADC controller.
		*/
		struct hwspinlock *hwlock;
		struct completion completion;
		int channel_scale[SC27XX_ADC_CHANNEL_MAX];
		u32 base;
		int value;
		int irq;
		};

		struct sc27xx_adc_linear_graph {
		int volt0;
		int adc0;
		int volt1;
		int adc1;
		};

		/*
		* According to the datasheet, we can convert one ADC value to one voltage value
		* through 2 points in the linear graph. If the voltage is less than 1.2v, we
		* should use the small-scale graph, and if more than 1.2v, we should use the
		* big-scale graph.
		*/
		static const struct sc27xx_adc_linear_graph big_scale_graph = {
		4200, 3310,
		3600, 2832,
		};

		static const struct sc27xx_adc_linear_graph small_scale_graph = {
		1000, 3413,
		100, 341,
		};

		static int sc27xx_adc_get_ratio(int channel, int scale)
		{
		switch (channel) {
		case 1:
		case 2:
		case 3:
		case 4:
		return scale ? SC27XX_VOLT_RATIO(400, 1025) :
		SC27XX_VOLT_RATIO(1, 1);
		case 5:
		return SC27XX_VOLT_RATIO(7, 29);
		case 6:
		return SC27XX_VOLT_RATIO(375, 9000);
		case 7:
		case 8:
		return scale ? SC27XX_VOLT_RATIO(100, 125) :
		SC27XX_VOLT_RATIO(1, 1);
		case 19:
		return SC27XX_VOLT_RATIO(1, 3);
		default:
		return SC27XX_VOLT_RATIO(1, 1);
		}
		return SC27XX_VOLT_RATIO(1, 1);
		}

		static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
		int scale, int *val)
		{
		int ret;
		u32 tmp;

		reinit_completion(&data->completion);

		ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
		if (ret) {
		dev_err(data->dev, "timeout to get the hwspinlock\n");
		return ret;
		}

		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
		SC27XX_ADC_EN, SC27XX_ADC_EN);
		if (ret)
		goto unlock_adc;

		/* Configure the channel id and scale */
		tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
		tmp \|= channel & SC27XX_ADC_CHN_ID_MASK;
		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
		SC27XX_ADC_CHN_ID_MASK \| SC27XX_ADC_SCALE_MASK,
		tmp);
		if (ret)
		goto disable_adc;

		/* Select 12bit conversion mode, and only sample 1 time */
		tmp = SC27XX_ADC_12BIT_MODE;
		tmp \|= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK;
		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
		SC27XX_ADC_RUN_NUM_MASK \| SC27XX_ADC_12BIT_MODE,
		tmp);
		if (ret)
		goto disable_adc;

		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
		SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
		if (ret)
		goto disable_adc;

		wait_for_completion(&data->completion);

		disable_adc:
		regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
		SC27XX_ADC_EN, 0);
		unlock_adc:
		hwspin_unlock_raw(data->hwlock);

		if (!ret)
		*val = data->value;

		return ret;
		}

		static irqreturn_t sc27xx_adc_isr(int irq, void *dev_id)
		{
		struct sc27xx_adc_data *data = dev_id;
		int ret;

		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
		SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
		if (ret)
		return IRQ_RETVAL(ret);

		ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA,
		&data->value);
		if (ret)
		return IRQ_RETVAL(ret);

		data->value &= SC27XX_ADC_DATA_MASK;
		complete(&data->completion);

		return IRQ_HANDLED;
		}

		static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
		int channel, int scale,
		u32 div_numerator, u32 div_denominator)
		{
		u32 ratio = sc27xx_adc_get_ratio(channel, scale);

		*div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
		*div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
		}

		static int sc27xx_adc_to_volt(const struct sc27xx_adc_linear_graph *graph,
		int raw_adc)
		{
		int tmp;

		tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1);
		tmp /= (graph->adc0 - graph->adc1);
		tmp += graph->volt1;

		return tmp < 0 ? 0 : tmp;
		}

		static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
		int scale, int raw_adc)
		{
		u32 numerator, denominator;
		u32 volt;

		/*
		* Convert ADC values to voltage values according to the linear graph,
		* and channel 5 and channel 1 has been calibrated, so we can just
		* return the voltage values calculated by the linear graph. But other
		* channels need be calculated to the real voltage values with the
		* voltage ratio.
		*/
		switch (channel) {
		case 5:
		return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);

		case 1:
		return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);

		default:
		volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
		break;
		}

		sc27xx_adc_volt_ratio(data, channel, scale, &numerator, &denominator);

		return (volt * denominator + numerator / 2) / numerator;
		}

		static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
		int channel, int scale, int *val)
		{
		int ret, raw_adc;

		ret = sc27xx_adc_read(data, channel, scale, &raw_adc);
		if (ret)
		return ret;

		*val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
		return 0;
		}

		static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
		struct iio_chan_spec const *chan,
		int val, int val2, long mask)
		{
		struct sc27xx_adc_data *data = iio_priv(indio_dev);
		int scale = data->channel_scale[chan->channel];
		int ret, tmp;

		switch (mask) {
		case IIO_CHAN_INFO_PROCESSED:
		mutex_lock(&indio_dev->mlock);
		ret = sc27xx_adc_read_processed(data, chan->channel, scale,
		&tmp);
		mutex_unlock(&indio_dev->mlock);

		if (ret)
		return ret;

		*val = tmp;
		return IIO_VAL_INT;

		case IIO_CHAN_INFO_SCALE:
		*val = scale;
		return IIO_VAL_INT;

		default:
		return -EINVAL;
		}
		}

		static int sc27xx_adc_write_raw(struct iio_dev *indio_dev,
		struct iio_chan_spec const *chan,
		int val, int val2, long mask)
		{
		struct sc27xx_adc_data *data = iio_priv(indio_dev);

		switch (mask) {
		case IIO_CHAN_INFO_SCALE:
		data->channel_scale[chan->channel] = val;
		return IIO_VAL_INT;

		default:
		return -EINVAL;
		}
		}

		static const struct iio_info sc27xx_info = {
		.read_raw = &sc27xx_adc_read_raw,
		.write_raw = &sc27xx_adc_write_raw,
		};

		#define SC27XX_ADC_CHANNEL(index) { \
		.type = IIO_VOLTAGE, \
		.channel = index, \
		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) \| \
		BIT(IIO_CHAN_INFO_SCALE), \
		.datasheet_name = "CH##index", \
		.indexed = 1, \
		}

		static const struct iio_chan_spec sc27xx_channels[] = {
		SC27XX_ADC_CHANNEL(0),
		SC27XX_ADC_CHANNEL(1),
		SC27XX_ADC_CHANNEL(2),
		SC27XX_ADC_CHANNEL(3),
		SC27XX_ADC_CHANNEL(4),
		SC27XX_ADC_CHANNEL(5),
		SC27XX_ADC_CHANNEL(6),
		SC27XX_ADC_CHANNEL(7),
		SC27XX_ADC_CHANNEL(8),
		SC27XX_ADC_CHANNEL(9),
		SC27XX_ADC_CHANNEL(10),
		SC27XX_ADC_CHANNEL(11),
		SC27XX_ADC_CHANNEL(12),
		SC27XX_ADC_CHANNEL(13),
		SC27XX_ADC_CHANNEL(14),
		SC27XX_ADC_CHANNEL(15),
		SC27XX_ADC_CHANNEL(16),
		SC27XX_ADC_CHANNEL(17),
		SC27XX_ADC_CHANNEL(18),
		SC27XX_ADC_CHANNEL(19),
		SC27XX_ADC_CHANNEL(20),
		SC27XX_ADC_CHANNEL(21),
		SC27XX_ADC_CHANNEL(22),
		SC27XX_ADC_CHANNEL(23),
		SC27XX_ADC_CHANNEL(24),
		SC27XX_ADC_CHANNEL(25),
		SC27XX_ADC_CHANNEL(26),
		SC27XX_ADC_CHANNEL(27),
		SC27XX_ADC_CHANNEL(28),
		SC27XX_ADC_CHANNEL(29),
		SC27XX_ADC_CHANNEL(30),
		SC27XX_ADC_CHANNEL(31),
		};

		static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
		{
		int ret;

		ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
		SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
		if (ret)
		return ret;

		/* Enable ADC work clock and controller clock */
		ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
		SC27XX_CLK_ADC_EN \| SC27XX_CLK_ADC_CLK_EN,
		SC27XX_CLK_ADC_EN \| SC27XX_CLK_ADC_CLK_EN);
		if (ret)
		goto disable_adc;

		ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
		SC27XX_ADC_IRQ_EN, SC27XX_ADC_IRQ_EN);
		if (ret)
		goto disable_clk;

		return 0;

		disable_clk:
		regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
		SC27XX_CLK_ADC_EN \| SC27XX_CLK_ADC_CLK_EN, 0);
		disable_adc:
		regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
		SC27XX_MODULE_ADC_EN, 0);

		return ret;
		}

		static void sc27xx_adc_disable(void *_data)
		{
		struct sc27xx_adc_data *data = _data;

		regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
		SC27XX_ADC_IRQ_EN, 0);

		/* Disable ADC work clock and controller clock */
		regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
		SC27XX_CLK_ADC_EN \| SC27XX_CLK_ADC_CLK_EN, 0);

		regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
		SC27XX_MODULE_ADC_EN, 0);
		}

		static void sc27xx_adc_free_hwlock(void *_data)
		{
		struct hwspinlock *hwlock = _data;

		hwspin_lock_free(hwlock);
		}

		static int sc27xx_adc_probe(struct platform_device *pdev)
		{
		struct device_node *np = pdev->dev.of_node;
		struct sc27xx_adc_data *sc27xx_data;
		struct iio_dev *indio_dev;
		int ret;

		indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
		if (!indio_dev)
		return -ENOMEM;

		sc27xx_data = iio_priv(indio_dev);

		sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
		if (!sc27xx_data->regmap) {
		dev_err(&pdev->dev, "failed to get ADC regmap\n");
		return -ENODEV;
		}

		ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
		if (ret) {
		dev_err(&pdev->dev, "failed to get ADC base address\n");
		return ret;
		}

		sc27xx_data->irq = platform_get_irq(pdev, 0);
		if (sc27xx_data->irq < 0) {
		dev_err(&pdev->dev, "failed to get ADC irq number\n");
		return sc27xx_data->irq;
		}

		ret = of_hwspin_lock_get_id(np, 0);
		if (ret < 0) {
		dev_err(&pdev->dev, "failed to get hwspinlock id\n");
		return ret;
		}

		sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
		if (!sc27xx_data->hwlock) {
		dev_err(&pdev->dev, "failed to request hwspinlock\n");
		return -ENXIO;
		}

		ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
		sc27xx_data->hwlock);
		if (ret) {
		sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
		dev_err(&pdev->dev, "failed to add hwspinlock action\n");
		return ret;
		}

		init_completion(&sc27xx_data->completion);
		sc27xx_data->dev = &pdev->dev;

		ret = sc27xx_adc_enable(sc27xx_data);
		if (ret) {
		dev_err(&pdev->dev, "failed to enable ADC module\n");
		return ret;
		}

		ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
		if (ret) {
		sc27xx_adc_disable(sc27xx_data);
		dev_err(&pdev->dev, "failed to add ADC disable action\n");
		return ret;
		}

		ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
		sc27xx_adc_isr, IRQF_ONESHOT,
		pdev->name, sc27xx_data);
		if (ret) {
		dev_err(&pdev->dev, "failed to request ADC irq\n");
		return ret;
		}

		indio_dev->dev.parent = &pdev->dev;
		indio_dev->name = dev_name(&pdev->dev);
		indio_dev->modes = INDIO_DIRECT_MODE;
		indio_dev->info = &sc27xx_info;
		indio_dev->channels = sc27xx_channels;
		indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
		ret = devm_iio_device_register(&pdev->dev, indio_dev);
		if (ret)
		dev_err(&pdev->dev, "could not register iio (ADC)");

		return ret;
		}

		static const struct of_device_id sc27xx_adc_of_match[] = {
		{ .compatible = "sprd,sc2731-adc", },
		{ }
		};

		static struct platform_driver sc27xx_adc_driver = {
		.probe = sc27xx_adc_probe,
		.driver = {
		.name = "sc27xx-adc",
		.of_match_table = sc27xx_adc_of_match,
		},
		};

		module_platform_driver(sc27xx_adc_driver);

		MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
		MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver");
		MODULE_LICENSE("GPL v2");

Admin message