Unverified Commit 5dc4ca29 authored by Alison Wang's avatar Alison Wang Committed by Mark Brown
Browse files

ASoC: sgtl5000: Allow SCLK pad drive strength to be changed 



This patch introduces "sclk-strength" property to allow SCLK pad drive
strength to be changed via device tree.

When running playback test on LS1028ARDB, Tx Frame sync error interrupt
will occur sometimes. Some noises also exist. After changing SCLK pad
drive strength to the maximum value, the issues are gone.

Signed-off-by: default avatarAlison Wang <alison.wang@nxp.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 47caf048

Documentation/devicetree/bindings/sound/sgtl5000.txt

+9 −0
Original line number Diff line number Diff line
@@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V 
2 =		3.33 mA		5.74 mA		8.03  mA

3 =		4.99 mA		8.61 mA		12.05 mA



- sclk-strength: the SCLK pad strength. Possible values are:

0, 1, 2 and 3 as per the table below:



VDDIO		1.8V		2.5V		3.3V

0 = 		Disable

1 =		1.66 mA		2.87 mA		4.02  mA

2 =		3.33 mA		5.74 mA		8.03  mA

3 =		4.99 mA		8.61 mA		12.05 mA



Example:



sgtl5000: codec@a {

sound/soc/codecs/sgtl5000.c

+18 −1
Original line number Diff line number Diff line
@@ -116,6 +116,13 @@ enum { 
	I2S_LRCLK_STRENGTH_HIGH,

};



enum  {

	I2S_SCLK_STRENGTH_DISABLE,

	I2S_SCLK_STRENGTH_LOW,

	I2S_SCLK_STRENGTH_MEDIUM,

	I2S_SCLK_STRENGTH_HIGH,

};



/* sgtl5000 private structure in codec */

struct sgtl5000_priv {

	int sysclk;	/* sysclk rate */
@@ -129,6 +136,7 @@ struct sgtl5000_priv { 
	u8 micbias_resistor;

	u8 micbias_voltage;

	u8 lrclk_strength;

	u8 sclk_strength;

};



/*
@@ -1302,7 +1310,9 @@ static int sgtl5000_probe(struct snd_soc_component *component) 
			SGTL5000_DAC_MUTE_RIGHT |

			SGTL5000_DAC_MUTE_LEFT);



	reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f);

	reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT |

	       (sgtl5000->sclk_strength) << SGTL5000_PAD_I2S_SCLK_SHIFT |

	       0x1f);

	snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);



	snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
@@ -1542,6 +1552,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, 
		sgtl5000->lrclk_strength = value;

	}



	sgtl5000->sclk_strength = I2S_SCLK_STRENGTH_LOW;

	if (!of_property_read_u32(np, "sclk-strength", &value)) {

		if (value > I2S_SCLK_STRENGTH_HIGH)

			value = I2S_SCLK_STRENGTH_LOW;

		sgtl5000->sclk_strength = value;

	}



	/* Ensure sgtl5000 will start with sane register values */

	sgtl5000_fill_defaults(client);

CRA Git | Maintained and supported by SUSTech CRA and CCSE