i40e: implement virtual device interface

/*******************************************************************************

 *

 * Intel Ethernet Controller XL710 Family Linux Driver

 * Copyright(c) 2013 Intel Corporation.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms and conditions of the GNU General Public License,

 * version 2, as published by the Free Software Foundation.

 *

 * This program is distributed in the hope it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * The full GNU General Public License is included in this distribution in

 * the file called "COPYING".

 *

 * Contact Information:

 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

 *

 ******************************************************************************/

#ifndef _I40E_VIRTCHNL_H_

#define _I40E_VIRTCHNL_H_

#include "i40e_type.h"

/* Description:

 * This header file describes the VF-PF communication protocol used

 * by the various i40e drivers.

 *

 * Admin queue buffer usage:

 * desc->opcode is always i40e_aqc_opc_send_msg_to_pf

 * flags, retval, datalen, and data addr are all used normally.

 * Firmware copies the cookie fields when sending messages between the PF and

 * VF, but uses all other fields internally. Due to this limitation, we

 * must send all messages as "indirect", i.e. using an external buffer.

 *

 * All the vsi indexes are relative to the VF. Each VF can have maximum of

 * three VSIs. All the queue indexes are relative to the VSI.  Each VF can

 * have a maximum of sixteen queues for all of its VSIs.

 *

 * The PF is required to return a status code in v_retval for all messages

 * except RESET_VF, which does not require any response. The return value is of

 * i40e_status_code type, defined in the i40e_type.h.

 *

 * In general, VF driver initialization should roughly follow the order of these

 * opcodes. The VF driver must first validate the API version of the PF driver,

 * then request a reset, then get resources, then configure queues and

 * interrupts. After these operations are complete, the VF driver may start

 * its queues, optionally add MAC and VLAN filters, and process traffic.

 */

/* Opcodes for VF-PF communication. These are placed in the v_opcode field

 * of the virtchnl_msg structure.

 */

enum i40e_virtchnl_ops {

/* VF sends req. to pf for the following

 * ops.

 */

	I40E_VIRTCHNL_OP_UNKNOWN = 0,

	I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */

	I40E_VIRTCHNL_OP_RESET_VF,

	I40E_VIRTCHNL_OP_GET_VF_RESOURCES,

	I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE,

	I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE,

	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES,

	I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP,

	I40E_VIRTCHNL_OP_ENABLE_QUEUES,

	I40E_VIRTCHNL_OP_DISABLE_QUEUES,

	I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS,

	I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS,

	I40E_VIRTCHNL_OP_ADD_VLAN,

	I40E_VIRTCHNL_OP_DEL_VLAN,

	I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE,

	I40E_VIRTCHNL_OP_GET_STATS,

	I40E_VIRTCHNL_OP_FCOE,

/* PF sends status change events to vfs using

 * the following op.

 */

	I40E_VIRTCHNL_OP_EVENT,

};

/* Virtual channel message descriptor. This overlays the admin queue

 * descriptor. All other data is passed in external buffers.

 */

struct i40e_virtchnl_msg {

	u8 pad[8];			 /* AQ flags/opcode/len/retval fields */

	enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */

	i40e_status v_retval;  /* ditto for desc->retval */

	u32 vfid;			 /* used by PF when sending to VF */

};

/* Message descriptions and data structures.*/

/* I40E_VIRTCHNL_OP_VERSION

 * VF posts its version number to the PF. PF responds with its version number

 * in the same format, along with a return code.

 * Reply from PF has its major/minor versions also in param0 and param1.

 * If there is a major version mismatch, then the VF cannot operate.

 * If there is a minor version mismatch, then the VF can operate but should

 * add a warning to the system log.

 *

 * This enum element MUST always be specified as == 1, regardless of other

 * changes in the API. The PF must always respond to this message without

 * error regardless of version mismatch.

 */

#define I40E_VIRTCHNL_VERSION_MAJOR		1

#define I40E_VIRTCHNL_VERSION_MINOR		0

struct i40e_virtchnl_version_info {

	u32 major;

	u32 minor;

};

/* I40E_VIRTCHNL_OP_RESET_VF

 * VF sends this request to PF with no parameters

 * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register

 * until reset completion is indicated. The admin queue must be reinitialized

 * after this operation.

 *

 * When reset is complete, PF must ensure that all queues in all VSIs associated

 * with the VF are stopped, all queue configurations in the HMC are set to 0,

 * and all MAC and VLAN filters (except the default MAC address) on all VSIs

 * are cleared.

 */

/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES

 * VF sends this request to PF with no parameters

 * PF responds with an indirect message containing

 * i40e_virtchnl_vf_resource and one or more

 * i40e_virtchnl_vsi_resource structures.

 */

struct i40e_virtchnl_vsi_resource {

	u16 vsi_id;

	u16 num_queue_pairs;

	enum i40e_vsi_type vsi_type;

	u16 qset_handle;

	u8 default_mac_addr[I40E_ETH_LENGTH_OF_ADDRESS];

};

/* VF offload flags */

#define I40E_VIRTCHNL_VF_OFFLOAD_L2	0x00000001

#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE	0x00000004

#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN	0x00010000

struct i40e_virtchnl_vf_resource {

	u16 num_vsis;

	u16 num_queue_pairs;

	u16 max_vectors;

	u16 max_mtu;

	u32 vf_offload_flags;

	u32 max_fcoe_contexts;

	u32 max_fcoe_filters;

	struct i40e_virtchnl_vsi_resource vsi_res[1];

};

/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE

 * VF sends this message to set up parameters for one TX queue.

 * External data buffer contains one instance of i40e_virtchnl_txq_info.

 * PF configures requested queue and returns a status code.

 */

/* Tx queue config info */

struct i40e_virtchnl_txq_info {

	u16 vsi_id;

	u16 queue_id;

	u16 ring_len;		/* number of descriptors, multiple of 8 */

	u16 headwb_enabled;

	u64 dma_ring_addr;

	u64 dma_headwb_addr;

};

/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE

 * VF sends this message to set up parameters for one RX queue.

 * External data buffer contains one instance of i40e_virtchnl_rxq_info.

 * PF configures requested queue and returns a status code.

 */

/* Rx queue config info */

struct i40e_virtchnl_rxq_info {

	u16 vsi_id;

	u16 queue_id;

	u32 ring_len;		/* number of descriptors, multiple of 32 */

	u16 hdr_size;

	u16 splithdr_enabled;

	u32 databuffer_size;

	u32 max_pkt_size;

	u64 dma_ring_addr;

	enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos;

};

/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES

 * VF sends this message to set parameters for all active TX and RX queues

 * associated with the specified VSI.

 * PF configures queues and returns status.

 * If the number of queues specified is greater than the number of queues

 * associated with the VSI, an error is returned and no queues are configured.

 */

struct i40e_virtchnl_queue_pair_info {

	/* NOTE: vsi_id and queue_id should be identical for both queues. */

	struct i40e_virtchnl_txq_info txq;

	struct i40e_virtchnl_rxq_info rxq;

};

struct i40e_virtchnl_vsi_queue_config_info {

	u16 vsi_id;

	u16 num_queue_pairs;

	struct i40e_virtchnl_queue_pair_info qpair[1];

};

/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP

 * VF uses this message to map vectors to queues.

 * The rxq_map and txq_map fields are bitmaps used to indicate which queues

 * are to be associated with the specified vector.

 * The "other" causes are always mapped to vector 0.

 * PF configures interrupt mapping and returns status.

 */

struct i40e_virtchnl_vector_map {

	u16 vsi_id;

	u16 vector_id;

	u16 rxq_map;

	u16 txq_map;

	u16 rxitr_idx;

	u16 txitr_idx;

};

struct i40e_virtchnl_irq_map_info {

	u16 num_vectors;

	struct i40e_virtchnl_vector_map vecmap[1];

};

/* I40E_VIRTCHNL_OP_ENABLE_QUEUES

 * I40E_VIRTCHNL_OP_DISABLE_QUEUES

 * VF sends these message to enable or disable TX/RX queue pairs.

 * The queues fields are bitmaps indicating which queues to act upon.

 * (Currently, we only support 16 queues per VF, but we make the field

 * u32 to allow for expansion.)

 * PF performs requested action and returns status.

 */

struct i40e_virtchnl_queue_select {

	u16 vsi_id;

	u16 pad;

	u32 rx_queues;

	u32 tx_queues;

};

/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS

 * VF sends this message in order to add one or more unicast or multicast

 * address filters for the specified VSI.

 * PF adds the filters and returns status.

 */

/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS

 * VF sends this message in order to remove one or more unicast or multicast

 * filters for the specified VSI.

 * PF removes the filters and returns status.

 */

struct i40e_virtchnl_ether_addr {

	u8 addr[I40E_ETH_LENGTH_OF_ADDRESS];

	u8 pad[2];

};

struct i40e_virtchnl_ether_addr_list {

	u16 vsi_id;

	u16 num_elements;

	struct i40e_virtchnl_ether_addr list[1];

};

/* I40E_VIRTCHNL_OP_ADD_VLAN

 * VF sends this message to add one or more VLAN tag filters for receives.

 * PF adds the filters and returns status.

 * If a port VLAN is configured by the PF, this operation will return an

 * error to the VF.

 */

/* I40E_VIRTCHNL_OP_DEL_VLAN

 * VF sends this message to remove one or more VLAN tag filters for receives.

 * PF removes the filters and returns status.

 * If a port VLAN is configured by the PF, this operation will return an

 * error to the VF.

 */

struct i40e_virtchnl_vlan_filter_list {

	u16 vsi_id;

	u16 num_elements;

	u16 vlan_id[1];

};

/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE

 * VF sends VSI id and flags.

 * PF returns status code in retval.

 * Note: we assume that broadcast accept mode is always enabled.

 */

struct i40e_virtchnl_promisc_info {

	u16 vsi_id;

	u16 flags;

};

#define I40E_FLAG_VF_UNICAST_PROMISC	0x00000001

#define I40E_FLAG_VF_MULTICAST_PROMISC	0x00000002

/* I40E_VIRTCHNL_OP_GET_STATS

 * VF sends this message to request stats for the selected VSI. VF uses

 * the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id

 * field is ignored by the PF.

 *

 * PF replies with struct i40e_eth_stats in an external buffer.

 */

/* I40E_VIRTCHNL_OP_EVENT

 * PF sends this message to inform the VF driver of events that may affect it.

 * No direct response is expected from the VF, though it may generate other

 * messages in response to this one.

 */

enum i40e_virtchnl_event_codes {

	I40E_VIRTCHNL_EVENT_UNKNOWN = 0,

	I40E_VIRTCHNL_EVENT_LINK_CHANGE,

	I40E_VIRTCHNL_EVENT_RESET_IMPENDING,

	I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE,

};

#define I40E_PF_EVENT_SEVERITY_INFO		0

#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM	255

struct i40e_virtchnl_pf_event {

	enum i40e_virtchnl_event_codes event;

	union {

		struct {

			enum i40e_aq_link_speed link_speed;

			bool link_status;

		} link_event;

	} event_data;

	int severity;

};

/* The following are TBD, not necessary for LAN functionality.

 * I40E_VIRTCHNL_OP_FCOE

 */

/* VF reset states - these are written into the RSTAT register:

 * I40E_VFGEN_RSTAT1 on the PF

 * I40E_VFGEN_RSTAT on the VF

 * When the PF initiates a reset, it writes 0

 * When the reset is complete, it writes 1

 * When the PF detects that the VF has recovered, it writes 2

 * VF checks this register periodically to determine if a reset has occurred,

 * then polls it to know when the reset is complete.

 * If either the PF or VF reads the register while the hardware

 * is in a reset state, it will return DEADBEEF, which, when masked

 * will result in 3.

 */

enum i40e_vfr_states {

	I40E_VFR_INPROGRESS = 0,

	I40E_VFR_COMPLETED,

	I40E_VFR_VFACTIVE,

	I40E_VFR_UNKNOWN,

};

#endif /* _I40E_VIRTCHNL_H_ */

/*******************************************************************************

 *

 * Intel Ethernet Controller XL710 Family Linux Driver

 * Copyright(c) 2013 Intel Corporation.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms and conditions of the GNU General Public License,

 * version 2, as published by the Free Software Foundation.

 *

 * This program is distributed in the hope it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * The full GNU General Public License is included in this distribution in

 * the file called "COPYING".

 *

 * Contact Information:

 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

 *

 ******************************************************************************/

#ifndef _I40E_VIRTCHNL_PF_H_

#define _I40E_VIRTCHNL_PF_H_

#include "i40e.h"

#define I40E_MAX_MACVLAN_FILTERS 256

#define I40E_MAX_VLAN_FILTERS 256

#define I40E_MAX_VLANID 4095

#define I40E_VIRTCHNL_SUPPORTED_QTYPES 2

#define I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED	3

#define I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED	10

#define I40E_VLAN_PRIORITY_SHIFT	12

#define I40E_VLAN_MASK			0xFFF

#define I40E_PRIORITY_MASK		0x7000

/* Various queue ctrls */

enum i40e_queue_ctrl {

	I40E_QUEUE_CTRL_UNKNOWN = 0,

	I40E_QUEUE_CTRL_ENABLE,

	I40E_QUEUE_CTRL_ENABLECHECK,

	I40E_QUEUE_CTRL_DISABLE,

	I40E_QUEUE_CTRL_DISABLECHECK,

	I40E_QUEUE_CTRL_FASTDISABLE,

	I40E_QUEUE_CTRL_FASTDISABLECHECK,

};

/* VF states */

enum i40e_vf_states {

	I40E_VF_STAT_INIT = 0,

	I40E_VF_STAT_ACTIVE,

	I40E_VF_STAT_FCOEENA,

	I40E_VF_STAT_DISABLED,

};

/* VF capabilities */

enum i40e_vf_capabilities {

	I40E_VIRTCHNL_VF_CAP_PRIVILEGE = 0,

	I40E_VIRTCHNL_VF_CAP_L2,

};

/* VF information structure */

struct i40e_vf {

	struct i40e_pf *pf;

	/* vf id in the pf space */

	u16 vf_id;

	/* all vf vsis connect to the same parent */

	enum i40e_switch_element_types parent_type;

	/* vf Port Extender (PE) stag if used */

	u16 stag;

	struct i40e_virtchnl_ether_addr default_lan_addr;

	struct i40e_virtchnl_ether_addr default_fcoe_addr;

	/* VSI indices - actual VSI pointers are maintained in the PF structure

	 * When assigned, these will be non-zero, because VSI 0 is always

	 * the main LAN VSI for the PF.

	 */

	u8 lan_vsi_index;	/* index into PF struct */

	u8 lan_vsi_id;		/* ID as used by firmware */

	u8 num_queue_pairs;	/* num of qps assigned to vf vsis */

	u64 num_mdd_events;	/* num of mdd events detected */

	u64 num_invalid_msgs;	/* num of malformed or invalid msgs detected */

	u64 num_valid_msgs;	/* num of valid msgs detected */

	unsigned long vf_caps;	/* vf's adv. capabilities */

	unsigned long vf_states;	/* vf's runtime states */

};

void i40e_free_vfs(struct i40e_pf *pf);

int i40e_pci_sriov_configure(struct pci_dev *dev, int num_vfs);

int i40e_vc_process_vf_msg(struct i40e_pf *pf, u16 vf_id, u32 v_opcode,

			   u32 v_retval, u8 *msg, u16 msglen);

int i40e_vc_process_vflr_event(struct i40e_pf *pf);

int i40e_reset_vf(struct i40e_vf *vf, bool flr);

void i40e_vc_notify_vf_reset(struct i40e_vf *vf);

/* vf configuration related iplink handlers */

int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac);

int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,

			      int vf_id, u16 vlan_id, u8 qos);

int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate);

int i40e_ndo_get_vf_config(struct net_device *netdev,

			   int vf_id, struct ifla_vf_info *ivi);

void i40e_vc_notify_link_state(struct i40e_pf *pf);

void i40e_vc_notify_reset(struct i40e_pf *pf);

#endif /* _I40E_VIRTCHNL_PF_H_ */