staging: rtl8188eu: remove blank lines in header files (5bfb7ead) · Commits · 戴 / test

drivers/staging/rtl8188eu/include/drv_types.h

+0 −1

Original line number	Diff line number	Diff line
		@@ -10,7 +10,6 @@

		------------------------------------------------------------------------------*/


		#ifndef __DRV_TYPES_H__
		#define __DRV_TYPES_H__

drivers/staging/rtl8188eu/include/hal_com.h

+0 −1

Original line number	Diff line number	Diff line
		@@ -137,7 +137,6 @@
		#include "HalVerDef.h"
		void dump_chip_info(struct HAL_VERSION ChipVersion);


		/* return the final channel plan decision */
		u8 hal_com_get_channel_plan(u8 hw_channel_plan, u8 sw_channel_plan,
		u8 def_channel_plan, bool load_fail);

drivers/staging/rtl8188eu/include/ieee80211.h

+0 −11

Original line number	Diff line number	Diff line
		@@ -90,7 +90,6 @@ enum {
		#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
		#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7


		#define IEEE_CRYPT_ALG_NAME_LEN 16

		#define WPA_CIPHER_NONE BIT(0)
		@@ -99,8 +98,6 @@ enum {
		#define WPA_CIPHER_TKIP BIT(3)
		#define WPA_CIPHER_CCMP BIT(4)



		#define WPA_SELECTOR_LEN 4
		extern u8 RTW_WPA_OUI_TYPE[];
		extern u8 WPA_AUTH_KEY_MGMT_NONE[];
		@@ -113,7 +110,6 @@ extern u8 WPA_CIPHER_SUITE_WRAP[];
		extern u8 WPA_CIPHER_SUITE_CCMP[];
		extern u8 WPA_CIPHER_SUITE_WEP104[];


		#define RSN_HEADER_LEN 4
		#define RSN_SELECTOR_LEN 4

		@@ -192,7 +188,6 @@ enum NETWORK_TYPE {
		#define IsSupportedTxMCS(NetType) \
		((NetType) & (WIRELESS_11_24N \| WIRELESS_11_5N) ? true : false)


		struct ieee_param {
		u32 cmd;
		u8 sta_addr[ETH_ALEN];
		@@ -270,11 +265,9 @@ struct sta_data {
		* WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
		*/


		#define IEEE80211_HLEN 30
		#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)


		/* this is stolen from ipw2200 driver */
		#define IEEE_IBSS_MAC_HASH_SIZE 31

		@@ -297,7 +290,6 @@ enum eap_type {
		#define RTW_IEEE80211_SCTL_FRAG 0x000F
		#define RTW_IEEE80211_SCTL_SEQ 0xFFF0


		#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
		#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
		#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
		@@ -354,7 +346,6 @@ struct ieee80211_snap_hdr {
		#define IEEE80211_CCK_RATE_LEN 4
		#define IEEE80211_NUM_OFDM_RATESLEN 8


		#define IEEE80211_CCK_RATE_1MB 0x02
		#define IEEE80211_CCK_RATE_2MB 0x04
		#define IEEE80211_CCK_RATE_5MB 0x0B
		@@ -613,7 +604,6 @@ enum rtw_ieee80211_back_parties {
		#define WME_TSPEC_DIRECTION_DOWNLINK 1
		#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3


		#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */

		#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
		@@ -758,7 +748,6 @@ uint rtw_get_rateset_len(u8 *rateset);
		struct registry_priv;
		int rtw_generate_ie(struct registry_priv *pregistrypriv);


		int rtw_get_bit_value_from_ieee_value(u8 val);

		bool rtw_is_cckrates_included(u8 *rate);

drivers/staging/rtl8188eu/include/odm.h

+0 −4

Original line number	Diff line number	Diff line
		@@ -5,7 +5,6 @@
		*
		******************************************************************************/


		#ifndef __HALDMOUTSRC_H__
		#define __HALDMOUTSRC_H__

		@@ -41,7 +40,6 @@
		#define DPK_DELTA_MAPPING_NUM 13
		#define index_mapping_HP_NUM 15


		/* */
		/* 3 PSD Handler */
		/* 3============================================================ */
		@@ -913,7 +911,6 @@ enum dm_dig_op {

		#define DM_SCAN_RSSI_TH 0x14 /* scan return issue for LC */


		#define DM_false_ALARM_THRESH_LOW 400
		#define DM_false_ALARM_THRESH_HIGH 1000

		@@ -991,7 +988,6 @@ enum dm_dig_op {
		/* 3 BB Power Save */
		/* 3=========================================================== */


		enum dm_1r_cca {
		CCA_1R = 0,
		CCA_2R = 1,

drivers/staging/rtl8188eu/include/odm_debug.h

+0 −2

Original line number	Diff line number	Diff line
		@@ -5,11 +5,9 @@
		*
		******************************************************************************/


		#ifndef __ODM_DBG_H__
		#define __ODM_DBG_H__


		/* */
		/* Define the debug levels */
		/* */

Admin message