+28
−13
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Currently the driver assumes that REG_BASE+0x00 is the IRQ enable mask, and REG_BASE+0x04 is the IRQ status mask. This is true on BCM3384 and BCM7xxx, but it is not true for some of the controllers found on BCM63xx chips. So we will change a couple of key assumptions: - Don't assume that both the IRQEN and IRQSTAT registers will be covered by a single ioremap() operation. - Don't assume any particular ordering (IRQSTAT might show up before IRQEN on some chips). - For an L2 controller with >=64 IRQs, don't assume that every IRQEN/IRQSTAT pair will use the same register spacing. This patch changes the "plumbing" but doesn't yet provide a way for users to instantiate a controller with arbitrary IRQEN/IRQSTAT offsets. Signed-off-by:Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8841/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE