Commit 5afe2781 authored by Stephen M. Cameron's avatar Stephen M. Cameron Committed by Jens Axboe
Browse files

cciss: do soft reset if hard reset is broken 



on driver load, if reset_devices is set, and the hard reset
attempts fail, try to bring up the controller to the point that
a command can be sent, and send it a soft reset command, then
after the reset undo whatever driver initialization was done to get
it to the point to take a command, and re-do it after the reset.

This is to get kdump to work on all the "non-resettable" controllers
(except 64xx controllers which can't be reset due to the potentially
shared cache module.)

Signed-off-by: default avatarStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: default avatarJens Axboe <jaxboe@fusionio.com>
parent bf2e2e6b

drivers/block/cciss.c

+221 −15
Original line number Diff line number Diff line
@@ -2477,6 +2477,31 @@ static int deregister_disk(ctlr_info_t *h, int drv_index, 
	return 0;

}



static int __devinit cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr,

	u8 reset_type)

{

	CommandList_struct *c;

	int return_status;



	c = cmd_alloc(h);

	if (!c)

		return -ENOMEM;

	return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0,

		CTLR_LUNID, TYPE_MSG);

	c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */

	if (return_status != IO_OK) {

		cmd_special_free(h, c);

		return return_status;

	}

	c->waiting = NULL;

	enqueue_cmd_and_start_io(h, c);

	/* Don't wait for completion, the reset won't complete.  Don't free

	 * the command either.  This is the last command we will send before

	 * re-initializing everything, so it doesn't matter and won't leak.

	 */

	return 0;

}



static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,

		size_t size, __u8 page_code, unsigned char *scsi3addr,

		int cmd_type)
@@ -3463,6 +3488,63 @@ static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag) 
	return next_command(h);

}



/* Some controllers, like p400, will give us one interrupt

 * after a soft reset, even if we turned interrupts off.

 * Only need to check for this in the cciss_xxx_discard_completions

 * functions.

 */

static int ignore_bogus_interrupt(ctlr_info_t *h)

{

	if (likely(!reset_devices))

		return 0;



	if (likely(h->interrupts_enabled))

		return 0;



	dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "

		"(known firmware bug.)  Ignoring.\n");



	return 1;

}



static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id)

{

	ctlr_info_t *h = dev_id;

	unsigned long flags;

	u32 raw_tag;



	if (ignore_bogus_interrupt(h))

		return IRQ_NONE;



	if (interrupt_not_for_us(h))

		return IRQ_NONE;

	spin_lock_irqsave(&h->lock, flags);

	while (interrupt_pending(h)) {

		raw_tag = get_next_completion(h);

		while (raw_tag != FIFO_EMPTY)

			raw_tag = next_command(h);

	}

	spin_unlock_irqrestore(&h->lock, flags);

	return IRQ_HANDLED;

}



static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id)

{

	ctlr_info_t *h = dev_id;

	unsigned long flags;

	u32 raw_tag;



	if (ignore_bogus_interrupt(h))

		return IRQ_NONE;



	spin_lock_irqsave(&h->lock, flags);

	raw_tag = get_next_completion(h);

	while (raw_tag != FIFO_EMPTY)

		raw_tag = next_command(h);

	spin_unlock_irqrestore(&h->lock, flags);

	return IRQ_HANDLED;

}



static irqreturn_t do_cciss_intx(int irq, void *dev_id)

{

	ctlr_info_t *h = dev_id;
@@ -4380,7 +4462,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u 
	return 0;

}



#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)

#define cciss_noop(p) cciss_message(p, 3, 0)



static int cciss_controller_hard_reset(struct pci_dev *pdev,
@@ -4591,13 +4672,17 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) 
	/* Wait for board to become not ready, then ready. */

	dev_info(&pdev->dev, "Waiting for board to reset.\n");

	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);

	if (rc) /* Don't bail, might be E500, etc. which can't be reset */

		dev_warn(&pdev->dev,

			"failed waiting for board to reset\n");

	if (rc) {

		dev_warn(&pdev->dev, "Failed waiting for board to hard reset."

				"  Will try soft reset.\n");

		rc = -ENOTSUPP; /* Not expected, but try soft reset later */

		goto unmap_cfgtable;

	}

	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);

	if (rc) {

		dev_warn(&pdev->dev,

			"failed waiting for board to become ready\n");

			"failed waiting for board to become ready "

			"after hard reset\n");

		goto unmap_cfgtable;

	}
@@ -4605,16 +4690,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) 
	if (rc < 0)

		goto unmap_cfgtable;

	if (rc) {

		dev_warn(&pdev->dev, "Unable to successfully reset controller,"

			" Ignoring controller.\n");

		rc = -ENODEV;

		goto unmap_cfgtable;

		dev_warn(&pdev->dev, "Unable to successfully hard reset "

			"controller. Will try soft reset.\n");

		rc = -ENOTSUPP; /* Not expected, but try soft reset later */

	} else {

		dev_info(&pdev->dev, "board ready.\n");

		dev_info(&pdev->dev, "Board ready after hard reset.\n");

	}



	dev_info(&pdev->dev, "board ready.\n");



unmap_cfgtable:

	iounmap(cfgtable);
@@ -4639,7 +4721,7 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev) 
	 * due to concerns about shared bbwc between 6402/6404 pair.

	 */

	if (rc == -ENOTSUPP)

		return 0; /* just try to do the kdump anyhow. */

		return rc; /* just try to do the kdump anyhow. */

	if (rc)

		return -ENODEV;
@@ -4745,6 +4827,60 @@ static int cciss_request_irq(ctlr_info_t *h, 
	return -1;

}



static int __devinit cciss_kdump_soft_reset(ctlr_info_t *h)

{

	if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) {

		dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");

		return -EIO;

	}



	dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");

	if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {

		dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");

		return -1;

	}



	dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");

	if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {

		dev_warn(&h->pdev->dev, "Board failed to become ready "

			"after soft reset.\n");

		return -1;

	}



	return 0;

}



static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h)

{

	int ctlr = h->ctlr;



	free_irq(h->intr[PERF_MODE_INT], h);

#ifdef CONFIG_PCI_MSI

	if (h->msix_vector)

		pci_disable_msix(h->pdev);

	else if (h->msi_vector)

		pci_disable_msi(h->pdev);

#endif /* CONFIG_PCI_MSI */

	cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);

	cciss_free_scatterlists(h);

	cciss_free_cmd_pool(h);

	kfree(h->blockFetchTable);

	if (h->reply_pool)

		pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64),

				h->reply_pool, h->reply_pool_dhandle);

	if (h->transtable)

		iounmap(h->transtable);

	if (h->cfgtable)

		iounmap(h->cfgtable);

	if (h->vaddr)

		iounmap(h->vaddr);

	unregister_blkdev(h->major, h->devname);

	cciss_destroy_hba_sysfs_entry(h);

	pci_release_regions(h->pdev);

	kfree(h);

	hba[ctlr] = NULL;

}



/*

 *  This is it.  Find all the controllers and register them.  I really hate

 *  stealing all these major device numbers.
@@ -4756,13 +4892,27 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, 
	int i;

	int j = 0;

	int rc;

	int try_soft_reset = 0;

	int dac, return_code;

	InquiryData_struct *inq_buff;

	ctlr_info_t *h;

	unsigned long flags;



	rc = cciss_init_reset_devices(pdev);

	if (rc)

	if (rc) {

		if (rc != -ENOTSUPP)

			return rc;

		/* If the reset fails in a particular way (it has no way to do

		 * a proper hard reset, so returns -ENOTSUPP) we can try to do

		 * a soft reset once we get the controller configured up to the

		 * point that it can accept a command.

		 */

		try_soft_reset = 1;

		rc = 0;

	}



reinit_after_soft_reset:



	i = alloc_cciss_hba(pdev);

	if (i < 0)

		return -1;
@@ -4852,6 +5002,62 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, 
		h->gendisk[j] = NULL;

	}



	/* At this point, the controller is ready to take commands.

	 * Now, if reset_devices and the hard reset didn't work, try

	 * the soft reset and see if that works.

	 */

	if (try_soft_reset) {



		/* This is kind of gross.  We may or may not get a completion

		 * from the soft reset command, and if we do, then the value

		 * from the fifo may or may not be valid.  So, we wait 10 secs

		 * after the reset throwing away any completions we get during

		 * that time.  Unregister the interrupt handler and register

		 * fake ones to scoop up any residual completions.

		 */

		spin_lock_irqsave(&h->lock, flags);

		h->access.set_intr_mask(h, CCISS_INTR_OFF);

		spin_unlock_irqrestore(&h->lock, flags);

		free_irq(h->intr[PERF_MODE_INT], h);

		rc = cciss_request_irq(h, cciss_msix_discard_completions,

					cciss_intx_discard_completions);

		if (rc) {

			dev_warn(&h->pdev->dev, "Failed to request_irq after "

				"soft reset.\n");

			goto clean4;

		}



		rc = cciss_kdump_soft_reset(h);

		if (rc) {

			dev_warn(&h->pdev->dev, "Soft reset failed.\n");

			goto clean4;

		}



		dev_info(&h->pdev->dev, "Board READY.\n");

		dev_info(&h->pdev->dev,

			"Waiting for stale completions to drain.\n");

		h->access.set_intr_mask(h, CCISS_INTR_ON);

		msleep(10000);

		h->access.set_intr_mask(h, CCISS_INTR_OFF);



		rc = controller_reset_failed(h->cfgtable);

		if (rc)

			dev_info(&h->pdev->dev,

				"Soft reset appears to have failed.\n");



		/* since the controller's reset, we have to go back and re-init

		 * everything.  Easiest to just forget what we've done and do it

		 * all over again.

		 */

		cciss_undo_allocations_after_kdump_soft_reset(h);

		try_soft_reset = 0;

		if (rc)

			/* don't go to clean4, we already unallocated */

			return -ENODEV;



		goto reinit_after_soft_reset;

	}



	cciss_scsi_setup(h);



	/* Turn the interrupts on so we can service requests */

CRA Git | Maintained and supported by SUSTech CRA and CCSE