Commit 59757c75 authored by Paul Bolle's avatar Paul Bolle Committed by Tony Lindgren
Browse files

ARM: OMAP7XX: Remove omap730.h and omap850.h 



No file includes omap730.h or omap850.h. That's not surprising, as
commit e6684f71 ("OMAP7XX: Create
omap7xx.h") created a header that was "intended to replace omap730.h and
omap850.h", while all "values defined [in omap7xx.h] are identical to
those in both the old files". So it seems it was just an oversight to
keep both the old files after commit
7a8f48f8 ("OMAP7XX: omap_uwire.c:
Convert to omap7xx.h") converted the last file still including one of
those two old files.

Convert the last reference to omap730.h to a reference to omap7xx.h too.

Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent b56f2cb7

arch/arm/plat-omap/include/plat/mux.h

+1 −1
Original line number Diff line number Diff line
@@ -99,7 +99,7 @@ 


/*

 * OMAP730/850 has a slightly different config for the pin mux.

 * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and

 * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and

 *   not the FUNC_MUX_CTRL_x regs from hardware.h

 * - for pull-up/down, only has one enable bit which is is in the same register

 *   as mux config

arch/arm/plat-omap/include/plat/omap730.h

deleted100644 → 0
+0 −102
Original line number Diff line number Diff line 
/* arch/arm/plat-omap/include/mach/omap730.h

 *

 * Hardware definitions for TI OMAP730 processor.

 *

 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License as published by the

 * Free Software Foundation; either version 2 of the License, or (at your

 * option) any later version.

 *

 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED

 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 * You should have received a copy of the  GNU General Public License along

 * with this program; if not, write  to the Free Software Foundation, Inc.,

 * 675 Mass Ave, Cambridge, MA 02139, USA.

 */



#ifndef __ASM_ARCH_OMAP730_H

#define __ASM_ARCH_OMAP730_H



/*

 * ----------------------------------------------------------------------------

 * Base addresses

 * ----------------------------------------------------------------------------

 */



/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */



#define OMAP730_DSP_BASE	0xE0000000

#define OMAP730_DSP_SIZE	0x50000

#define OMAP730_DSP_START	0xE0000000



#define OMAP730_DSPREG_BASE	0xE1000000

#define OMAP730_DSPREG_SIZE	SZ_128K

#define OMAP730_DSPREG_START	0xE1000000



/*

 * ----------------------------------------------------------------------------

 * OMAP730 specific configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP730_CONFIG_BASE	0xfffe1000

#define OMAP730_IO_CONF_0	0xfffe1070

#define OMAP730_IO_CONF_1	0xfffe1074

#define OMAP730_IO_CONF_2	0xfffe1078

#define OMAP730_IO_CONF_3	0xfffe107c

#define OMAP730_IO_CONF_4	0xfffe1080

#define OMAP730_IO_CONF_5	0xfffe1084

#define OMAP730_IO_CONF_6	0xfffe1088

#define OMAP730_IO_CONF_7	0xfffe108c

#define OMAP730_IO_CONF_8	0xfffe1090

#define OMAP730_IO_CONF_9	0xfffe1094

#define OMAP730_IO_CONF_10	0xfffe1098

#define OMAP730_IO_CONF_11	0xfffe109c

#define OMAP730_IO_CONF_12	0xfffe10a0

#define OMAP730_IO_CONF_13	0xfffe10a4



#define OMAP730_MODE_1		0xfffe1010

#define OMAP730_MODE_2		0xfffe1014



/* CSMI specials: in terms of base + offset */

#define OMAP730_MODE2_OFFSET	0x14



/*

 * ----------------------------------------------------------------------------

 * OMAP730 traffic controller configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP730_FLASH_CFG_0	0xfffecc10

#define OMAP730_FLASH_ACFG_0	0xfffecc50

#define OMAP730_FLASH_CFG_1	0xfffecc14

#define OMAP730_FLASH_ACFG_1	0xfffecc54



/*

 * ----------------------------------------------------------------------------

 * OMAP730 DSP control registers

 * ----------------------------------------------------------------------------

 */

#define OMAP730_ICR_BASE	0xfffbb800

#define OMAP730_DSP_M_CTL	0xfffbb804

#define OMAP730_DSP_MMU_BASE	0xfffed200



/*

 * ----------------------------------------------------------------------------

 * OMAP730 PCC_UPLD configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)

#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)



#endif /*  __ASM_ARCH_OMAP730_H */

arch/arm/plat-omap/include/plat/omap850.h

deleted100644 → 0
+0 −102
Original line number Diff line number Diff line 
/* arch/arm/plat-omap/include/mach/omap850.h

 *

 * Hardware definitions for TI OMAP850 processor.

 *

 * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License as published by the

 * Free Software Foundation; either version 2 of the License, or (at your

 * option) any later version.

 *

 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED

 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 * You should have received a copy of the  GNU General Public License along

 * with this program; if not, write  to the Free Software Foundation, Inc.,

 * 675 Mass Ave, Cambridge, MA 02139, USA.

 */



#ifndef __ASM_ARCH_OMAP850_H

#define __ASM_ARCH_OMAP850_H



/*

 * ----------------------------------------------------------------------------

 * Base addresses

 * ----------------------------------------------------------------------------

 */



/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */



#define OMAP850_DSP_BASE	0xE0000000

#define OMAP850_DSP_SIZE	0x50000

#define OMAP850_DSP_START	0xE0000000



#define OMAP850_DSPREG_BASE	0xE1000000

#define OMAP850_DSPREG_SIZE	SZ_128K

#define OMAP850_DSPREG_START	0xE1000000



/*

 * ----------------------------------------------------------------------------

 * OMAP850 specific configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP850_CONFIG_BASE	0xfffe1000

#define OMAP850_IO_CONF_0	0xfffe1070

#define OMAP850_IO_CONF_1	0xfffe1074

#define OMAP850_IO_CONF_2	0xfffe1078

#define OMAP850_IO_CONF_3	0xfffe107c

#define OMAP850_IO_CONF_4	0xfffe1080

#define OMAP850_IO_CONF_5	0xfffe1084

#define OMAP850_IO_CONF_6	0xfffe1088

#define OMAP850_IO_CONF_7	0xfffe108c

#define OMAP850_IO_CONF_8	0xfffe1090

#define OMAP850_IO_CONF_9	0xfffe1094

#define OMAP850_IO_CONF_10	0xfffe1098

#define OMAP850_IO_CONF_11	0xfffe109c

#define OMAP850_IO_CONF_12	0xfffe10a0

#define OMAP850_IO_CONF_13	0xfffe10a4



#define OMAP850_MODE_1		0xfffe1010

#define OMAP850_MODE_2		0xfffe1014



/* CSMI specials: in terms of base + offset */

#define OMAP850_MODE2_OFFSET	0x14



/*

 * ----------------------------------------------------------------------------

 * OMAP850 traffic controller configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP850_FLASH_CFG_0	0xfffecc10

#define OMAP850_FLASH_ACFG_0	0xfffecc50

#define OMAP850_FLASH_CFG_1	0xfffecc14

#define OMAP850_FLASH_ACFG_1	0xfffecc54



/*

 * ----------------------------------------------------------------------------

 * OMAP850 DSP control registers

 * ----------------------------------------------------------------------------

 */

#define OMAP850_ICR_BASE	0xfffbb800

#define OMAP850_DSP_M_CTL	0xfffbb804

#define OMAP850_DSP_MMU_BASE	0xfffed200



/*

 * ----------------------------------------------------------------------------

 * OMAP850 PCC_UPLD configuration registers

 * ----------------------------------------------------------------------------

 */

#define OMAP850_PCC_UPLD_CTRL_BASE	(0xfffe0900)

#define OMAP850_PCC_UPLD_CTRL		(OMAP850_PCC_UPLD_CTRL_BASE + 0x00)



#endif /*  __ASM_ARCH_OMAP850_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE