Commit 58c559e6 authored by Ramneek Mehresh's avatar Ramneek Mehresh Committed by Greg Kroah-Hartman
Browse files

fsl/usb: Add controller version based ULPI and UTMI phy support 



Add support for ULPI and UTMI PHYs based on usb controller
version info read from device-tree

Example of USB Controller versioning info:
Version 1.2 and below : MPC8536, MPC8315, etc
Version 1.6 : P1020, P1010, P2020, P5020, etc
Version 2.2 : PSC9131, PSC9132, P3060, etc

No changes for non-DT users

Signed-off-by: default avatarRamneek Mehresh <ramneek.mehresh@freescale.com>
Acked-by: default avatarLi Yang <leoli@freescale.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 67c88382

drivers/usb/gadget/fsl_udc_core.c

+23 −5
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc.

 * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc.

 * All rights reserved.

 *

 * Author: Li Yang <leoli@freescale.com>
@@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc"; 
static const char driver_desc[] = DRIVER_DESC;



static struct usb_dr_device *dr_regs;

#ifndef CONFIG_ARCH_MXC



static struct usb_sys_interface *usb_sys_regs;

#endif



/* it is initialized in probe()  */

static struct fsl_udc *udc_controller = NULL;
@@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc) 
{

	unsigned int tmp, portctrl, ep_num;

	unsigned int max_no_of_ep;

#ifndef CONFIG_ARCH_MXC

	unsigned int ctrl;

#endif

	unsigned long timeout;



#define FSL_UDC_RESET_TIMEOUT 1000



	/* Config PHY interface */
@@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc) 
	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);

	switch (udc->phy_mode) {

	case FSL_USB2_PHY_ULPI:

		if (udc->pdata->have_sysif_regs) {

			if (udc->pdata->controller_ver) {

				/* controller version 1.6 or above */

				ctrl = __raw_readl(&usb_sys_regs->control);

				ctrl &= ~USB_CTRL_UTMI_PHY_EN;

				ctrl |= USB_CTRL_USB_EN;

				__raw_writel(ctrl, &usb_sys_regs->control);

			}

		}

		portctrl |= PORTSCX_PTS_ULPI;

		break;

	case FSL_USB2_PHY_UTMI_WIDE:

		portctrl |= PORTSCX_PTW_16BIT;

		/* fall through */

	case FSL_USB2_PHY_UTMI:

		if (udc->pdata->have_sysif_regs) {

			if (udc->pdata->controller_ver) {

				/* controller version 1.6 or above */

				ctrl = __raw_readl(&usb_sys_regs->control);

				ctrl |= (USB_CTRL_UTMI_PHY_EN |

					USB_CTRL_USB_EN);

				__raw_writel(ctrl, &usb_sys_regs->control);

				mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI

					PHY CLK to become stable - 10ms*/

			}

		}

		portctrl |= PORTSCX_PTS_UTMI;

		break;

	case FSL_USB2_PHY_SERIAL:

drivers/usb/gadget/fsl_usb2_udc.h

+11 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2004,2012 Freescale Semiconductor, Inc

 * All rights reserved.

 *

 * This program is free software; you can redistribute  it and/or modify it

 * under  the terms of  the GNU General  Public License as published by the

 * Free Software Foundation;  either version 2 of the  License, or (at your

 * option) any later version.

 *

 * Freescale USB device/endpoint management registers

 */

#ifndef __FSL_USB2_UDC_H
@@ -348,6 +356,9 @@ struct usb_sys_interface { 
/* control Register Bit Masks */

#define  USB_CTRL_IOENB                       0x00000004

#define  USB_CTRL_ULPI_INT0EN                 0x00000001

#define USB_CTRL_UTMI_PHY_EN		      0x00000200

#define USB_CTRL_USB_EN			      0x00000004

#define USB_CTRL_ULPI_PHY_CLK_SEL	      0x00000400



/* Endpoint Queue Head data struct

 * Rem: all the variables of qh are LittleEndian Mode

drivers/usb/host/ehci-fsl.c

+28 −7
Original line number Diff line number Diff line 
/*

 * Copyright 2005-2009 MontaVista Software, Inc.

 * Copyright 2008      Freescale Semiconductor, Inc.

 * Copyright 2008,2012      Freescale Semiconductor, Inc.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License as published by the
@@ -211,19 +211,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, 
	usb_put_hcd(hcd);

}



static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,

static void ehci_fsl_setup_phy(struct usb_hcd *hcd,

			       enum fsl_usb2_phy_modes phy_mode,

			       unsigned int port_offset)

{

	u32 portsc;

	struct usb_hcd *hcd = ehci_to_hcd(ehci);

	u32 portsc, temp;

	struct ehci_hcd *ehci = hcd_to_ehci(hcd);

	void __iomem *non_ehci = hcd->regs;

	struct device *dev = hcd->self.controller;

	struct fsl_usb2_platform_data *pdata = dev->platform_data;



	if (pdata->controller_ver < 0) {

		dev_warn(hcd->self.controller, "Could not get controller version\n");

		return;

	}



	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);

	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);



	switch (phy_mode) {

	case FSL_USB2_PHY_ULPI:

		if (pdata->controller_ver) {

			/* controller version 1.6 or above */

			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);

			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |

				USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL);

		}

		portsc |= PORT_PTS_ULPI;

		break;

	case FSL_USB2_PHY_SERIAL:
@@ -233,6 +246,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, 
		portsc |= PORT_PTS_PTW;

		/* fall through */

	case FSL_USB2_PHY_UTMI:

		if (pdata->controller_ver) {

			/* controller version 1.6 or above */

			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);

			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |

				UTMI_PHY_EN | USB_CTRL_USB_EN);

			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to

						become stable - 10ms*/

		}

		/* enable UTMI PHY */

		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);

		portsc |= PORT_PTS_UTMI;
@@ -271,7 +292,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) 


	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||

			(pdata->operating_mode == FSL_USB2_DR_OTG))

		ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);

		ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);



	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {

		unsigned int chip, rev, svr;
@@ -285,9 +306,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) 
			ehci->has_fsl_port_bug = 1;



		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)

			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);

			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);

		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)

			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);

			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1);

	}



	if (pdata->have_sysif_regs) {

drivers/usb/host/ehci-fsl.h

+12 −1
Original line number Diff line number Diff line 
/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc.

/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.

 * Copyright (c) 2005 MontaVista Software

 *

 * This program is free software; you can redistribute  it and/or modify it
@@ -50,4 +50,15 @@ 
#define CTRL_UTMI_PHY_EN	(1<<9)

#define CTRL_PHY_CLK_VALID	(1 << 17)

#define SNOOP_SIZE_2GB		0x1e



/* control Register Bit Masks */

#define ULPI_INT_EN             (1<<0)

#define WU_INT_EN               (1<<1)

#define USB_CTRL_USB_EN         (1<<2)

#define LINE_STATE_FILTER__EN   (1<<3)

#define KEEP_OTG_ON             (1<<4)

#define OTG_PORT                (1<<5)

#define PLL_RESET               (1<<8)

#define UTMI_PHY_EN             (1<<9)

#define ULPI_PHY_CLK_SEL        (1<<10)

#endif				/* _EHCI_FSL_H */

drivers/usb/host/fsl-mph-dr-of.c

+41 −0
Original line number Diff line number Diff line
@@ -119,6 +119,39 @@ error: 


static const struct of_device_id fsl_usb2_mph_dr_of_match[];



static int usb_get_ver_info(struct device_node *np)

{

	int ver = -1;



	/*

	 * returns 1 for usb controller version 1.6

	 * returns 2 for usb controller version 2.2

	 * returns 0 otherwise

	 */

	if (of_device_is_compatible(np, "fsl-usb2-dr")) {

		if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6"))

			ver = FSL_USB_VER_1_6;

		else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2"))

			ver = FSL_USB_VER_2_2;

		else /* for previous controller versions */

			ver = FSL_USB_VER_OLD;



		if (ver > -1)

			return ver;

	}



	if (of_device_is_compatible(np, "fsl-usb2-mph")) {

		if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))

			ver = FSL_USB_VER_1_6;

		else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2"))

			ver = FSL_USB_VER_2_2;

		else /* for previous controller versions */

			ver = FSL_USB_VER_OLD;

	}



	return ver;

}



static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)

{

	struct device_node *np = ofdev->dev.of_node;
@@ -166,6 +199,14 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) 


	prop = of_get_property(np, "phy_type", NULL);

	pdata->phy_mode = determine_usb_phy(prop);

	pdata->controller_ver = usb_get_ver_info(np);



	if (pdata->have_sysif_regs) {

		if (pdata->controller_ver < 0) {

			dev_warn(&ofdev->dev, "Could not get controller version\n");

			return -ENODEV;

		}

	}



	for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {

		if (!dev_data->drivers[i])

CRA Git | Maintained and supported by SUSTech CRA and CCSE