+121
−42
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
At present, TCPM code assumes that local device supports variable/batt pdos and always selects the pdo with highest possible power within the board limit. This assumption might not hold good for all devices. To overcome this, this patch makes TCPM only accept a source_pdo when there is a matching sink pdo. For Fixed pdos: The voltage should match between the incoming source_cap and the registered snk_pdo For Variable/Batt pdos: The incoming source_cap voltage range should fall within the registered snk_pdo's voltage range. Also, when the cap_mismatch bit is set, the max_power/current should be set to the max_current/power of the sink_pdo. This is according to: "If the Capability Mismatch bit is set to one The Maximum Operating Current/Power field may contain a value larger than the maximum current/power offered in the Source Capabilities message’s PDO as referenced by the Object position field. This enables the Sink to indicate that it requires more current/power than is being offered. If the Sink requires a different voltage this will be indicated by its Sink Capabilities message. Signed-off-by:Badhri Jagan Sridharan <Badhri@google.com> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE