Commit 57ab56fa authored by Aisheng Dong's avatar Aisheng Dong Committed by Shawn Guo
Browse files

ARM: dts: imx6sx-sabreauto: add flexcan support 



The CAN transceiver on MX6SX Sabreauto board seems in sleep mode by default
after power up the board. User has to press the wakeup key on ARD baseboard
before using the transceiver, or it may not work properly when power up the
board at the first time(warm reset does not have such issue).

This patch operates the wake pin too besides stby/en pins by chaining them
together in regulator mode.

Signed-off-by: default avatarAisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: default avatarJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 88dddae6

arch/arm/boot/dts/imx6sx-sabreauto.dts

+57 −0
Original line number Diff line number Diff line
@@ -37,6 +37,35 @@ 
		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	reg_can_wake: regulator-can-wake {

		compatible = "regulator-fixed";

		regulator-name = "can-wake";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	reg_can_en: regulator-can-en {

		compatible = "regulator-fixed";

		regulator-name = "can-en";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;

		enable-active-high;

		vin-supply = <&reg_can_wake>;

	};



	reg_can_stby: regulator-can-stby {

		compatible = "regulator-fixed";

		regulator-name = "can-stby";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;

		enable-active-high;

		vin-supply = <&reg_can_en>;

	};

};



&anaclk2 {
@@ -76,6 +105,20 @@ 
	status = "okay";

};



&flexcan1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_flexcan1>;

	xceiver-supply = <&reg_can_stby>;

	status = "okay";

};



&flexcan2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_flexcan2>;

	xceiver-supply = <&reg_can_stby>;

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;
@@ -150,6 +193,20 @@ 
		>;

	};



	pinctrl_flexcan1: flexcan1grp {

		fsl,pins = <

			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020

			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX	0x1b020

		>;

	};



	pinctrl_flexcan2: flexcan2grp {

		fsl,pins = <

			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020

			MX6SX_PAD_QSPI1A_DQS__CAN2_TX	0x1b020

		>;

	};



	pinctrl_i2c2: i2c2grp {

		fsl,pins = <

			MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1

CRA Git | Maintained and supported by SUSTech CRA and CCSE