+138
−30
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by:Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE