Commit 56ca9040 authored by Pavel Pisa's avatar Pavel Pisa Committed by Russell King
Browse files

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1 



Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.

There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.

Regenerated against 2.6.16-git-060402 to solve clash with other patches.

Signed-off-by: default avatarPavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 65dbf343

arch/arm/mach-imx/generic.c

+13 −0
Original line number Diff line number Diff line
@@ -33,6 +33,7 @@ 
#include <asm/arch/imx-regs.h>



#include <asm/mach/map.h>

#include <asm/arch/mmc.h>



void imx_gpio_mode(int gpio_mode)

{
@@ -175,13 +176,25 @@ static struct resource imx_mmc_resources[] = { 
	},

};



static u64 imxmmmc_dmamask = 0xffffffffUL;



static struct platform_device imx_mmc_device = {

	.name		= "imx-mmc",

	.id		= 0,

	.dev		= {

		.dma_mask = &imxmmmc_dmamask,

		.coherent_dma_mask = 0xffffffff,

	},

	.num_resources	= ARRAY_SIZE(imx_mmc_resources),

	.resource	= imx_mmc_resources,

};



void __init imx_set_mmc_info(struct imxmmc_platform_data *info)

{

	imx_mmc_device.dev.platform_data = info;

}

EXPORT_SYMBOL(imx_set_mmc_info);



static struct resource imx_uart1_resources[] = {

	[0] = {

		.start	= 0x00206000,

drivers/mmc/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -99,4 +99,14 @@ config MMC_AT91RM9200 


	  If unsure, say N.



config MMC_IMX

	tristate "Motorola i.MX Multimedia Card Interface support"

	depends on ARCH_IMX && MMC

	help

	  This selects the Motorola i.MX Multimedia card Interface.

	  If you have a i.MX platform with a Multimedia Card slot,

	  say Y or M here.



	  If unsure, say N.



endmenu

drivers/mmc/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -17,6 +17,7 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o 
#

obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o

obj-$(CONFIG_MMC_PXA)		+= pxamci.o

obj-$(CONFIG_MMC_IMX)		+= imxmmc.o

obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o

obj-$(CONFIG_MMC_WBSD)		+= wbsd.o

obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o

drivers/mmc/imxmmc.c

0 → 100644
+1096 −0

File added.

Preview size limit exceeded, changes collapsed.

drivers/mmc/imxmmc.h

0 → 100644
+67 −0
Original line number Diff line number Diff line 


# define __REG16(x)	(*((volatile u16 *)IO_ADDRESS(x)))



#define MMC_STR_STP_CLK  __REG16(IMX_MMC_BASE + 0x00)

#define MMC_STATUS       __REG16(IMX_MMC_BASE + 0x04)

#define MMC_CLK_RATE     __REG16(IMX_MMC_BASE + 0x08)

#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)

#define MMC_RES_TO       __REG16(IMX_MMC_BASE + 0x10)

#define MMC_READ_TO      __REG16(IMX_MMC_BASE + 0x14)

#define MMC_BLK_LEN      __REG16(IMX_MMC_BASE + 0x18)

#define MMC_NOB          __REG16(IMX_MMC_BASE + 0x1C)

#define MMC_REV_NO       __REG16(IMX_MMC_BASE + 0x20)

#define MMC_INT_MASK     __REG16(IMX_MMC_BASE + 0x24)

#define MMC_CMD          __REG16(IMX_MMC_BASE + 0x28)

#define MMC_ARGH         __REG16(IMX_MMC_BASE + 0x2C)

#define MMC_ARGL         __REG16(IMX_MMC_BASE + 0x30)

#define MMC_RES_FIFO     __REG16(IMX_MMC_BASE + 0x34)

#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)

#define MMC_BUFFER_ACCESS_OFS 0x38





#define STR_STP_CLK_ENDIAN              (1<<5)

#define STR_STP_CLK_RESET               (1<<3)

#define STR_STP_CLK_ENABLE              (1<<2)

#define STR_STP_CLK_START_CLK           (1<<1)

#define STR_STP_CLK_STOP_CLK            (1<<0)

#define STATUS_CARD_PRESENCE            (1<<15)

#define STATUS_SDIO_INT_ACTIVE          (1<<14)

#define STATUS_END_CMD_RESP             (1<<13)

#define STATUS_WRITE_OP_DONE            (1<<12)

#define STATUS_DATA_TRANS_DONE          (1<<11)

#define STATUS_WR_CRC_ERROR_CODE_MASK   (3<<10)

#define STATUS_CARD_BUS_CLK_RUN         (1<<8)

#define STATUS_APPL_BUFF_FF             (1<<7)

#define STATUS_APPL_BUFF_FE             (1<<6)

#define STATUS_RESP_CRC_ERR             (1<<5)

#define STATUS_CRC_READ_ERR             (1<<3)

#define STATUS_CRC_WRITE_ERR            (1<<2)

#define STATUS_TIME_OUT_RESP            (1<<1)

#define STATUS_TIME_OUT_READ            (1<<0)

#define STATUS_ERR_MASK                 0x2f

#define CLK_RATE_PRESCALER(x)           ((x) & 0x7)

#define CLK_RATE_CLK_RATE(x)            (((x) & 0x7) << 3)

#define CMD_DAT_CONT_CMD_RESP_LONG_OFF  (1<<12)

#define CMD_DAT_CONT_STOP_READWAIT      (1<<11)

#define CMD_DAT_CONT_START_READWAIT     (1<<10)

#define CMD_DAT_CONT_BUS_WIDTH_1        (0<<8)

#define CMD_DAT_CONT_BUS_WIDTH_4        (2<<8)

#define CMD_DAT_CONT_INIT               (1<<7)

#define CMD_DAT_CONT_BUSY               (1<<6)

#define CMD_DAT_CONT_STREAM_BLOCK       (1<<5)

#define CMD_DAT_CONT_WRITE              (1<<4)

#define CMD_DAT_CONT_DATA_ENABLE        (1<<3)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)

#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)

#define INT_MASK_AUTO_CARD_DETECT       (1<<6)

#define INT_MASK_DAT0_EN                (1<<5)

#define INT_MASK_SDIO                   (1<<4)

#define INT_MASK_BUF_READY              (1<<3)

#define INT_MASK_END_CMD_RES            (1<<2)

#define INT_MASK_WRITE_OP_DONE          (1<<1)

#define INT_MASK_DATA_TRAN              (1<<0)

#define INT_ALL                         (0x7f)

CRA Git | Maintained and supported by SUSTech CRA and CCSE