Commit 551969ad authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) 



Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.

The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys

Signed-off-by: default avatarKonrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com


[bjorn: Changed vendor identifier in board compatible from somc to sony]
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent f007210d

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts

0 → 100644
+13 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2020, Konrad Dybcio

 */



/dts-v1/;



#include "msm8994-sony-xperia-kitakami.dtsi"



/ {

	model = "Sony Xperia Z5";

	compatible = "sony,sumire-row", "qcom,msm8994";

};

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi

0 → 100644
+235 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2020, Konrad Dybcio

 */



#include "msm8994.dtsi"

#include "pm8994.dtsi"

#include "pmi8994.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/gpio-keys.h>



/ {

	/* required for bootloader to select correct board */

	qcom,msm-id = <0xcf 0x20001>;

	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;

	qcom,board-id = <8 0>;



	/* Kitakami firmware doesn't support PSCI */

	/delete-node/ psci;



	gpio_keys {

		compatible = "gpio-keys";

		input-name = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		autorepeat;



		button@0 {

			label = "Volume Down";

			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEDOWN>;

			wakeup-source;

			debounce-interval = <15>;

		};



		button@1 {

			label = "Volume Up";

			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

			wakeup-source;

			debounce-interval = <15>;

		};



		button@2 {

			label = "Camera Snapshot";

			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_CAMERA>;

			wakeup-source;

			debounce-interval = <15>;

		};



		button@3 {

			label = "Camera Focus";

			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

			wakeup-source;

			debounce-interval = <15>;

		};

	};



	reserved-memory {

		#address-cells = <2>;

		#size-cells = <2>;

		ranges;



		/* This is for getting crash logs using Android downstream kernels */

		ramoops@1fe00000 {

			compatible = "ramoops";

			reg = <0x0 0x1fe00000 0x0 0x200000>;

			console-size = <0x100000>;

			record-size = <0x10000>;

			ftrace-size = <0x10000>;

			pmsg-size = <0x80000>;

		};



		continuous_splash: framebuffer@3401000{

			reg = <0x0 0x3401000 0x0 0x2200000>;

			no-map;

		};



		dfps_data_mem: dfps_data_mem@3400000 {

			reg = <0x0 0x3400000 0x0 0x1000>;

			no-map;

		};



		peripheral_region: peripheral_region@7400000 {

			reg = <0x0 0x7400000 0x0 0x1c00000>;

			no-map;

		};



		modem_region: modem_region@9000000 {

			reg = <0x0 0x9000000 0x0 0x5a00000>;

			no-map;

		};



		tzapp: modem_region@ea00000 {

			reg = <0x0 0xea00000 0x0 0x1900000>;

			no-map;

		};



		fb_region: fb_region@40000000 {

			reg = <0x00 0x40000000 0x00 0x1000000>;

			no-map;

		};

	};

};



&blsp_spi0 {

	status = "okay";



	/* FPC fingerprint reader */

};



/* I2C1 is disabled on this board */



&blsp_i2c2 {

	status = "okay";



	/* NXP NFC */

};



&blsp_i2c4 {

	status = "okay";



	/* Empty but active */

};



&blsp_i2c5 {

	status = "okay";



	/* SMB1357 charger and sii8620 HDMI/MHL bridge */

};



&blsp_i2c6 {

	status = "okay";



	/* Synaptics touchscreen */

};



&blsp1_uart2 {

	status = "okay";

};



&blsp2_uart2 {

	status = "okay";

};



&rpm_requests {

	pm8994_regulators: pm8994-regulators {

		compatible = "qcom,rpm-pm8994-regulators";

		vdd_l1-supply = <&pm8994_s1>;

		vdd_l2_26_28-supply = <&pm8994_s3>;

		vdd_l3_11-supply = <&pm8994_s3>;

		vdd_l4_27_31-supply = <&pm8994_s3>;

		vdd_l5_7-supply = <&pm8994_s3>;

		vdd_l6_12_32-supply = <&pm8994_s5>;

		vdd_l8_16_30-supply = <&vreg_vph_pwr>;

		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;

		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;

		vdd_l14_15-supply = <&pm8994_s5>;

		vdd_l17_29-supply = <&vreg_vph_pwr>;

		vdd_l20_21-supply = <&vreg_vph_pwr>;

		vdd_l25-supply = <&pm8994_s5>;

		vdd_lvs1_2 = <&pm8994_s4>;



		pm8994_s1: s1 {};

		pm8994_s2: s2 {};

		pm8994_s3: s3 {};

		pm8994_s4: s4 {};

		pm8994_s5: s5 {};

		pm8994_s6: s6 {};

		pm8994_s7: s7 {};



		pm8994_l1: l1 {};

		pm8994_l2: l2 {};

		pm8994_l3: l3 {};

		pm8994_l4: l4 {};

		pm8994_l6: l6 {};

		pm8994_l8: l8 {};

		pm8994_l9: l9 {};

		pm8994_l10: l10 {};

		pm8994_l11: l11 {};

		pm8994_l12: l12 {};

		pm8994_l13: l13 {};

		pm8994_l14: l14 {};

		pm8994_l15: l15 {};

		pm8994_l16: l16 {};

		pm8994_l17: l17 {};

		pm8994_l18: l18 {};

		pm8994_l19: l19 {};

		pm8994_l20: l20 {};

		pm8994_l21: l21 {};

		pm8994_l22: l22 {};

		pm8994_l23: l23 {};

		pm8994_l24: l24 {};

		pm8994_l25: l25 {};

		pm8994_l26: l26 {};

		pm8994_l27: l27 {};

		pm8994_l28: l28 {};

		pm8994_l29: l29 {};

		pm8994_l30: l30 {};

		pm8994_l31: l31 {};

		pm8994_l32: l32 {};



		pm8994_lvs1: lvs1 {};

		pm8994_lvs2: lvs2 {};

	};



	pmi8994_regulators: pmi8994-regulators {

		compatible = "qcom,rpm-pmi8994-regulators";



		pmi8994_s1: s1 {};

		pmi8994_s2: s2 {};

		pmi8994_s3: s3 {};

		pmi8994_bby: boost-bypass {};

	};

};



&sdhc1 {

	status = "okay";



	/* Downstream pushes 2.95V to the sdhci device,

	 * but upstream driver REALLY wants to make vmmc 1.8v

	 * cause of the hs400-1_8v mode. MMC works fine without

	 * that regulator, so let's not use it for now.

	 * vqmmc is also disabled cause driver stll complains.

	 *

	 * vmmc-supply = <&pm8994_l20>;

	 * vqmmc-supply = <&pm8994_s4>;

	 */

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE