Commit 550a7375 authored by Felipe Balbi's avatar Felipe Balbi Committed by Greg Kroah-Hartman
Browse files

USB: Add MUSB and TUSB support 



This patch adds support for MUSB and TUSB controllers
integrated into omap2430 and davinci. It also adds support
for external tusb6010 controller.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f331e40e

MAINTAINERS

+6 −0
Original line number Diff line number Diff line
@@ -2928,6 +2928,12 @@ M: jirislaby@gmail.com 
L:	linux-kernel@vger.kernel.org

S:	Maintained



MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER

P:     Felipe Balbi

M:     felipe.balbi@nokia.com

L:     linux-usb@vger.kernel.org

S:     Maintained



MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)

P:	Andrew Gallatin

M:	gallatin@myri.com

drivers/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ 
obj-$(CONFIG_PARIDE) 		+= block/paride/

obj-$(CONFIG_TC)		+= tc/

obj-$(CONFIG_USB)		+= usb/

obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/

obj-$(CONFIG_PCI)		+= usb/

obj-$(CONFIG_USB_GADGET)	+= usb/gadget/

obj-$(CONFIG_SERIO)		+= input/serio/

drivers/usb/Kconfig

+2 −0
Original line number Diff line number Diff line
@@ -99,6 +99,8 @@ source "drivers/usb/mon/Kconfig" 


source "drivers/usb/host/Kconfig"



source "drivers/usb/musb/Kconfig"



source "drivers/usb/class/Kconfig"



source "drivers/usb/storage/Kconfig"

drivers/usb/gadget/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -284,6 +284,16 @@ config USB_LH7A40X 
	default USB_GADGET

	select USB_GADGET_SELECTED



# built in ../musb along with host support

config USB_GADGET_MUSB_HDRC

	boolean "Inventra HDRC USB Peripheral (TI, ...)"

	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)

	select USB_GADGET_DUALSPEED

	select USB_GADGET_SELECTED

	help

	  This OTG-capable silicon IP is used in dual designs including

	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.



config USB_GADGET_OMAP

	boolean "OMAP USB Device Controller"

	depends on ARCH_OMAP

drivers/usb/musb/Kconfig

0 → 100644
+176 −0
Original line number Diff line number Diff line 
#

# USB Dual Role (OTG-ready) Controller Drivers

# for silicon based on Mentor Graphics INVENTRA designs

#



comment "Enable Host or Gadget support to see Inventra options"

	depends on !USB && USB_GADGET=n



# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller

config USB_MUSB_HDRC

	depends on (USB || USB_GADGET) && HAVE_CLK

	select TWL4030_USB if MACH_OMAP_3430SDP

	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'

	help

	  Say Y here if your system has a dual role high speed USB

	  controller based on the Mentor Graphics silicon IP.  Then

	  configure options to match your silicon and the board

	  it's being used with, including the USB peripheral role,

	  or the USB host role, or both.



	  Texas Instruments parts using this IP include DaVinci 644x,

	  OMAP 243x, OMAP 343x, and TUSB 6010.



	  If you do not know what this is, please say N.



	  To compile this driver as a module, choose M here; the

	  module will be called "musb_hdrc".



config USB_MUSB_SOC

	boolean

	depends on USB_MUSB_HDRC

	default y if ARCH_DAVINCI

	default y if ARCH_OMAP2430

	default y if ARCH_OMAP34XX

	help

	  Use a static <asm/arch/hdrc_cnf.h> file to describe how the

	  controller is configured (endpoints, mechanisms, etc) on the

	  current iteration of a given system-on-chip.



comment "DaVinci 644x USB support"

	depends on USB_MUSB_HDRC && ARCH_DAVINCI



comment "OMAP 243x high speed USB support"

	depends on USB_MUSB_HDRC && ARCH_OMAP2430



comment "OMAP 343x high speed USB support"

	depends on USB_MUSB_HDRC && ARCH_OMAP34XX



config USB_TUSB6010

	boolean "TUSB 6010 support"

	depends on USB_MUSB_HDRC && !USB_MUSB_SOC

	default y

	help

	  The TUSB 6010 chip, from Texas Instruments, connects a discrete

	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ

	  (a high speed serial link).  It can use system-specific external

	  DMA controllers.



choice

	prompt "Driver Mode"

	depends on USB_MUSB_HDRC

	help

	  Dual-Role devices can support both host and peripheral roles,

	  as well as a the special "OTG Device" role which can switch

	  between both roles as needed.



# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;

# OTG needs both roles, not just USB_MUSB_HOST.

config USB_MUSB_HOST

	depends on USB

	bool "USB Host"

	help

	  Say Y here if your system supports the USB host role.

	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),

	  or "Mini-AB" connector, it supports the host role.

	  (With a "Mini-AB" connector, you should enable USB OTG.)



# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral

# side support ... OTG needs both roles

config USB_MUSB_PERIPHERAL

	depends on USB_GADGET

	bool "USB Peripheral (gadget stack)"

	select USB_GADGET_MUSB_HDRC

	help

	  Say Y here if your system supports the USB peripheral role.

	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"

	  connector, it supports the peripheral role.

	  (With a "Mini-AB" connector, you should enable USB OTG.)



config USB_MUSB_OTG

	depends on USB && USB_GADGET && PM && EXPERIMENTAL

	bool "Both host and peripheral:  USB OTG (On The Go) Device"

	select USB_GADGET_MUSB_HDRC

	select USB_OTG

	help

	   The most notable feature of USB OTG is support for a

	   "Dual-Role" device, which can act as either a device

	   or a host.  The initial role choice can be changed

	   later, when two dual-role devices talk to each other.



	   At this writing, the OTG support in this driver is incomplete,

	   omitting the mandatory HNP or SRP protocols.  However, some

	   of the cable based role switching works.  (That is, grounding

	   the ID pin switches the controller to host mode, while leaving

	   it floating leaves it in peripheral mode.)



	   Select this if your system has a Mini-AB connector, or

	   to simplify certain kinds of configuration.



	   To implement your OTG Targeted Peripherals List (TPL), enable

	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"

	   to match your requirements.



endchoice



# enable peripheral support (including with OTG)

config USB_GADGET_MUSB_HDRC

	bool

	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)

#	default y

#	select USB_GADGET_DUALSPEED

#	select USB_GADGET_SELECTED



# enables host support (including with OTG)

config USB_MUSB_HDRC_HCD

	bool

	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)

	select USB_OTG if USB_GADGET_MUSB_HDRC

	default y





config MUSB_PIO_ONLY

	bool 'Disable DMA (always use PIO)'

	depends on USB_MUSB_HDRC

	default y if USB_TUSB6010

	help

	  All data is copied between memory and FIFO by the CPU.

	  DMA controllers are ignored.



	  Do not select 'n' here unless DMA support for your SOC or board

	  is unavailable (or unstable).  When DMA is enabled at compile time,

	  you can still disable it at run time using the "use_dma=n" module

	  parameter.



config USB_INVENTRA_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	default ARCH_OMAP2430 || ARCH_OMAP34XX

	help

	  Enable DMA transfers using Mentor's engine.



config USB_TI_CPPI_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	default ARCH_DAVINCI

	help

	  Enable DMA transfers when TI CPPI DMA is available.



config USB_TUSB_OMAP_DMA

	bool

	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY

	depends on USB_TUSB6010

	depends on ARCH_OMAP

	default y

	help

	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.



config	USB_MUSB_LOGLEVEL

	depends on USB_MUSB_HDRC

	int  'Logging Level (0 - none / 3 - annoying / ... )'

	default 0

	help

	  Set the logging level. 0 disables the debugging altogether,

	  although when USB_DEBUG is set the value is at least 1.

	  Starting at level 3, per-transfer (urb, usb_request, packet,

	  or dma transfer) tracing may kick in.

CRA Git | Maintained and supported by SUSTech CRA and CCSE