Commit 548d52bc authored by Lubomir Rintel's avatar Lubomir Rintel Committed by Arnd Bergmann
Browse files

ARM: dts: mmp2: add OLPC XO 1.75 machine 



This is a fairly complete description of an OLPC XO 1.75 laptop.
What's missing for now is the GPU, LCD controller, DCON, the panel and
audio.

The machine is booted with OpenFirmware and thus has a devicetree.
However, older versions are unable to create a valid FDT and don't
follow the Linux bindings. Having an device tree in the kernel tree
makes it easier to use mainline kernels on such machines, test changes
with CONFIG_ARM_APPENDED_DTB and give a good reference on what bindings
are used on the machine without an access to one.

Signed-off-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
parent 9393e2da

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -336,7 +336,8 @@ dtb-$(CONFIG_MACH_MESON8) += \ 
dtb-$(CONFIG_ARCH_MMP) += \

	pxa168-aspenite.dtb \

	pxa910-dkb.dtb \

	mmp2-brownstone.dtb

	mmp2-brownstone.dtb \

	mmp2-olpc-xo-1-75.dtb

dtb-$(CONFIG_ARCH_MPS2) += \

	mps2-an385.dtb \

	mps2-an399.dtb

arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts

0 → 100644
+244 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/*

 * OLPC XO 1.75 Laptop.

 *

 * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>

 */



/dts-v1/;

#include "mmp2.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	model = "OLPC XO-1.75";

	compatible = "olpc,xo-1.75", "mrvl,mmp2";



	chosen {

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		framebuffer@1fc00000 {

			compatible = "simple-framebuffer";

			reg = <0x1fc00000 (1200 * 900 * 2)>;

			width = <1200>;

			height = <900>;

			stride = <(1200 * 2)>;

			format = "r5g6b5";

			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,

				 <&soc_clocks MMP2_CLK_DISP0>;

		};

	};



	memory {

		linux,usable-memory = <0x0 0x1f800000>;

		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;

		reg = <0x0 0x20000000>;

		device_type = "memory";

	};



	gpio-keys {

		compatible = "gpio-keys";



		lid {

			label = "Lid";

			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_LID>;

			wakeup-source;

		};



		tablet_mode {

			label = "E-Book Mode";

			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_TABLET_MODE>;

			wakeup-source;

		};



		microphone_insert {

			label = "Microphone Plug";

			gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_MICROPHONE_INSERT>;

			debounce-interval = <100>;

			wakeup-source;

		};



		headphone_insert {

			label = "Headphone Plug";

			gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_HEADPHONE_INSERT>;

			debounce-interval = <100>;

			wakeup-source;

		};

	};



	camera_i2c {

		compatible = "i2c-gpio";

		gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,

			<&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

		#address-cells = <1>;

		#size-cells = <0>;

		i2c-gpio,timeout-ms = <1000>;

		status = "okay";



		camera@21 {

			compatible = "ovti,ov7670";

			reg = <0x21>;

			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;

			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;

			clocks = <&camera0>;

			clock-names = "xclk";



			port {

				ov7670_0: endpoint {

					hsync-active = <1>;

					vsync-active = <1>;

					remote-endpoint = <&camera0_0>;

				};

			};

		};

	};



	battery {

		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";

	};



	wlan_reg: fixedregulator0 {

		compatible = "regulator-fixed";

		regulator-name = "wlan";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	wlan_pwrseq: pwrseq0 {

		compatible = "mmc-pwrseq-sd8787";

		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;

		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;

	};



	soc {

		axi@d4200000 {

			ap-sp@d4290000 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "olpc,ap-sp";

				interrupts = <40>;

				reg = <0xd4290000 0x1000>;

				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;

				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;

				status = "okay";

			};

		};

	};

};



&uart3 {

	status = "okay";

};



&uart4 {

	status = "okay";

};



&rtc {

	status = "okay";

};



&usb_phy0 {

	status = "okay";

};



&usb_otg0 {

	status = "okay";

};



&mmc1 {

	clock-frequency = <50000000>;

	no-1-8-v;

	mrvl,clk-delay-cycles = <31>;

	broken-cd;

	status = "okay";

};



&mmc2 {

	clock-frequency = <50000000>;

	no-1-8-v;

	bus-width = <4>;

	non-removable;

	broken-cd;

	wakeup-source;

	keep-power-in-suspend;

	mmc-pwrseq = <&wlan_pwrseq>;

	vmmc-supply = <&wlan_reg>;

	status = "okay";

};



&mmc3 {

	clock-frequency = <50000000>;

	no-1-8-v;

	bus-width = <8>;

	non-removable;

	broken-cd;

	mrvl,clk-delay-cycles = <31>;

	status = "okay";

};



&twsi1 {

	status = "okay";



	audio-codec@1a {

		compatible = "realtek,alc5631";

		reg = <0x1a>;

		status = "okay";

	};

};



&twsi2 {

	status = "okay";



	rtc@68 {

		compatible = "dallas,ds1338";

		reg = <0x68>;

		status = "okay";

	};

};



&twsi6 {

	status = "okay";



	accelerometer@1d {

		compatible = "st,lis331dlh", "st,lis3lv02d";

		reg = <0x1d>;

		status = "okay";

	};

};



&ssp3 {

	#address-cells = <0>;

	spi-slave;

	status = "okay";

	ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;



	slave {

		compatible = "olpc,xo1.75-ec";

		spi-cpha;

		cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;

	};

};



&camera0 {

	status = "okay";



	port {

		camera0_0: endpoint {

			remote-endpoint = <&ov7670_0>;

		};

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE