Commit 542459e7 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

Merge tag 'omap-for-v4.2/dt-pt1' of... 

Merge tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree related changes for omaps" from Tony Lindgren:

- Configure MMC data lines 4..8 for 1.8V IO on boards that
  are using them as GPIOs instead of MMC data lines

- Add support for Baltos IR5221

- Add device tree support for LogicPD Torpedo devkit

- Add 3717 core pinctrl region

- Add gta04 1w and GSM audio support

- Add wilink and ov2659 support for am437x-gp-evm

- Add am335x-evm bluetooth and mmc3 support

- Enable omap5-uevm uart wakeup interrupt

- Enable I2C2 on BeagleBone as it's used for the capes

- Use defines for LDP GPIO keys

* tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-evm: add mmc3 and wlan definitions to dts
  ARM: dts: Enable SDIO card interrupt for 37xx-evm
  ARM: dts: Fix ldp gpio keys to use defines
  ARM: dts: Beaglebone i2c definitions
  ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
  ARM: dts: add DTS for Baltos IR5221
  ARM: dts: omap5-uevm: Add Uart wakeup interrupt
  ARM: dts: omap3-gta04: Add GSM audio support
  ARM: dts: am335x-evm: add bluetooth support
  ARM: dts: am437x-gp-evm: add wilink8 support
  ARM: dts: omap3-gta04: Add hdqw1 support
  ARM: dts: add core2 padconf region for am3517
  ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit
  ARM: OMAP3: Add support for configuring MMC pins as GPIO pins
parents 898a7f36 52dfcbfc

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -370,6 +370,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ 
	am3517-craneboard.dtb \

	am3517-evm.dtb \

	am3517_mt_ventoux.dtb \

	logicpd-torpedo-37xx-devkit.dtb \

	omap3430-sdp.dtb \

	omap3-beagle.dtb \

	omap3-beagle-xm.dtb \
@@ -416,6 +417,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ 
dtb-$(CONFIG_SOC_TI81XX) += \

	dm8168-evm.dtb

dtb-$(CONFIG_SOC_AM33XX) += \

	am335x-baltos-ir5221.dtb \

	am335x-base0033.dtb \

	am335x-bone.dtb \

	am335x-boneblack.dtb \

arch/arm/boot/dts/am335x-baltos-ir5221.dts

0 → 100644
+532 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/*

 * VScom OnRISC

 * http://www.vscom.de

 */



/dts-v1/;



#include "am33xx.dtsi"

#include <dt-bindings/pwm/pwm.h>

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	model = "OnRISC Baltos iR 5221";

	compatible = "vscom,onrisc", "ti,am33xx";



	cpus {

		cpu@0 {

			cpu0-supply = <&vdd1_reg>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x80000000 0x10000000>; /* 256 MB */

	};



	vbat: fixedregulator@0 {

		compatible = "regulator-fixed";

		regulator-name = "vbat";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-boot-on;

	};



	wl12xx_vmmc: fixedregulator@2 {

		pinctrl-names = "default";

		pinctrl-0 = <&wl12xx_gpio>;

		compatible = "regulator-fixed";

		regulator-name = "vwl1271";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&gpio3 8 0>;

		startup-delay-us = <70000>;

		enable-active-high;

	};

};



&am33xx_pinmux {

	mmc2_pins: pinmux_mmc2_pins {

		pinctrl-single,pins = <

			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */

			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */

			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */

			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */

			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */

			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */

			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */

		>;

	};



	wl12xx_gpio: pinmux_wl12xx_gpio {

		pinctrl-single,pins = <

			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */

		>;

	};



	tps65910_pins: pinmux_tps65910_pins {

		pinctrl-single,pins = <

			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */

		>;

	};



	tca6416_pins: pinmux_tca6416_pins {

		pinctrl-single,pins = <

			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */

		>;

	};



	i2c1_pins: pinmux_i2c1_pins {

		pinctrl-single,pins = <

			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */

			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */

		>;

	};



	dcan1_pins: pinmux_dcan1_pins {

		pinctrl-single,pins = <

			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */

			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */

		>;

	};



	uart0_pins: pinmux_uart0_pins {

		pinctrl-single,pins = <

			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */

			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */

		>;

	};



	uart1_pins: pinmux_uart1_pins {

		pinctrl-single,pins = <

			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */

			0x184 0x28      /* uart1_txd, INPUT | MODE0 */

			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */

			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */

			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */

			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */

			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */

			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */

			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */

			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */

		>;

	};



	uart2_pins: pinmux_uart2_pins {

		pinctrl-single,pins = <

			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */

			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */

			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */

			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */

			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */

			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */

			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */

			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */

			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */

			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */



			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */

		>;

	};



	cpsw_default: cpsw_default {

		pinctrl-single,pins = <

			/* Slave 1 */

			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */

			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */

			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */

			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */

			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */

			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */

			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */





			/* Slave 2 */

			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */

			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */

			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */

			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */

			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */

			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */

			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */

			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */

			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */

			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */

			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */

			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */

		>;

	};



	cpsw_sleep: cpsw_sleep {

		pinctrl-single,pins = <

			/* Slave 1 reset value */

			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)



			/* Slave 2 reset value*/

			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)

		>;

	};



	davinci_mdio_default: davinci_mdio_default {

		pinctrl-single,pins = <

			/* MDIO */

			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */

			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */

		>;

	};



	davinci_mdio_sleep: davinci_mdio_sleep {

		pinctrl-single,pins = <

			/* MDIO reset value */

			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)

			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)

		>;

	};



	nandflash_pins_s0: nandflash_pins_s0 {

		pinctrl-single,pins = <

			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */

			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */

			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */

			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */

			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */

			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */

			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */

			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */

			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */

			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */

			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */

			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */

			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */

			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */

			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */

		>;

	};

};



&elm {

	status = "okay";

};



&gpmc {

	pinctrl-names = "default";

	pinctrl-0 = <&nandflash_pins_s0>;

	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */

	status = "okay";



	nand@0,0 {

		reg = <0 0 0>; /* CS0, offset 0 */

		nand-bus-width = <8>;

		ti,nand-ecc-opt = "bch8";

		ti,nand-xfer-type = "polled";



		gpmc,device-nand = "true";

		gpmc,device-width = <1>;

		gpmc,sync-clk-ps = <0>;

		gpmc,cs-on-ns = <0>;

		gpmc,cs-rd-off-ns = <44>;

		gpmc,cs-wr-off-ns = <44>;

		gpmc,adv-on-ns = <6>;

		gpmc,adv-rd-off-ns = <34>;

		gpmc,adv-wr-off-ns = <44>;

		gpmc,we-on-ns = <0>;

		gpmc,we-off-ns = <40>;

		gpmc,oe-on-ns = <0>;

		gpmc,oe-off-ns = <54>;

		gpmc,access-ns = <64>;

		gpmc,rd-cycle-ns = <82>;

		gpmc,wr-cycle-ns = <82>;

		gpmc,wait-on-read = "true";

		gpmc,wait-on-write = "true";

		gpmc,bus-turnaround-ns = <0>;

		gpmc,cycle2cycle-delay-ns = <0>;

		gpmc,clk-activation-ns = <0>;

		gpmc,wait-monitoring-ns = <0>;

		gpmc,wr-access-ns = <40>;

		gpmc,wr-data-mux-bus-ns = <0>;



		#address-cells = <1>;

		#size-cells = <1>;

		elm_id = <&elm>;

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins>;



	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>;

	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;

	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;

	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;

	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;

	cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;

	rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;



	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins>;

	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;

	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;

	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;

	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;

	cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;

	rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;



	status = "okay";

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins>;



	status = "okay";

	clock-frequency = <400000>;



	tps: tps@2d {

		reg = <0x2d>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-parent = <&gpio1>;

		interrupts = <28 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&tps65910_pins>;

	};



	at24@50 {

		compatible = "at24,24c02";

		pagesize = <8>;

		reg = <0x50>;

	};



	tca6416: gpio@20 {

		compatible = "ti,tca6416";

		reg = <0x20>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-parent = <&gpio0>;

		interrupts = <20 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&tca6416_pins>;

	};

};



&usb {

	status = "okay";

};



&usb_ctrl_mod {

	status = "okay";

};



&usb0_phy {

	status = "okay";

};



&usb1_phy {

	status = "okay";

};



&usb0 {

	status = "okay";

	dr_mode = "host";

};



&usb1 {

	status = "okay";

	dr_mode = "otg";

};



&cppi41dma  {

	status = "okay";

};



#include "tps65910.dtsi"



&tps {

	vcc1-supply = <&vbat>;

	vcc2-supply = <&vbat>;

	vcc3-supply = <&vbat>;

	vcc4-supply = <&vbat>;

	vcc5-supply = <&vbat>;

	vcc6-supply = <&vbat>;

	vcc7-supply = <&vbat>;

	vccio-supply = <&vbat>;



	ti,en-ck32k-xtal = <1>;



	regulators {

		vrtc_reg: regulator@0 {

			regulator-always-on;

		};



		vio_reg: regulator@1 {

			regulator-always-on;

		};



		vdd1_reg: regulator@2 {

			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */

			regulator-name = "vdd_mpu";

			regulator-min-microvolt = <912500>;

			regulator-max-microvolt = <1312500>;

			regulator-boot-on;

			regulator-always-on;

		};



		vdd2_reg: regulator@3 {

			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */

			regulator-name = "vdd_core";

			regulator-min-microvolt = <912500>;

			regulator-max-microvolt = <1150000>;

			regulator-boot-on;

			regulator-always-on;

		};



		vdd3_reg: regulator@4 {

			regulator-always-on;

		};



		vdig1_reg: regulator@5 {

			regulator-always-on;

		};



		vdig2_reg: regulator@6 {

			regulator-always-on;

		};



		vpll_reg: regulator@7 {

			regulator-always-on;

		};



		vdac_reg: regulator@8 {

			regulator-always-on;

		};



		vaux1_reg: regulator@9 {

			regulator-always-on;

		};



		vaux2_reg: regulator@10 {

			regulator-always-on;

		};



		vaux33_reg: regulator@11 {

			regulator-always-on;

		};



		vmmc_reg: regulator@12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <3300000>;

			regulator-always-on;

		};

	};

};



&mac {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&cpsw_default>;

	pinctrl-1 = <&cpsw_sleep>;

	dual_emac = <1>;



	status = "okay";

};



&davinci_mdio {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&davinci_mdio_default>;

	pinctrl-1 = <&davinci_mdio_sleep>;



	status = "okay";

};



&cpsw_emac0 {

	phy_id = <&davinci_mdio>, <0>;

	phy-mode = "rmii";

	dual_emac_res_vlan = <1>;

};



&cpsw_emac1 {

	phy_id = <&davinci_mdio>, <7>;

	phy-mode = "rgmii-txid";

	dual_emac_res_vlan = <2>;

};



&phy_sel {

	rmii-clock-ext = <1>;

};



&mmc1 {

	vmmc-supply = <&vmmc_reg>;

	status = "okay";

};



&mmc2 {

	status = "okay";

	vmmc-supply = <&wl12xx_vmmc>;

	ti,non-removable;

	bus-width = <4>;

	cap-power-off-card;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins>;



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1835";

		reg = <2>;

		interrupt-parent = <&gpio3>;

		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;

	};

};



&sham {

	status = "okay";

};



&aes {

	status = "okay";

};



&gpio0 {

	ti,no-reset-on-init;

};



&dcan1 {

	pinctrl-names = "default";

	pinctrl-0 = <&dcan1_pins>;



	status = "okay";

};

arch/arm/boot/dts/am335x-bone-common.dtsi

+66 −0
Original line number Diff line number Diff line
@@ -81,6 +81,13 @@ 
		>;

	};



	i2c2_pins: pinmux_i2c2_pins {

		pinctrl-single,pins = <

			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */

			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */

		>;

	};



	uart0_pins: pinmux_uart0_pins {

		pinctrl-single,pins = <

			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
@@ -218,7 +225,66 @@ 
		reg = <0x24>;

	};



	baseboard_eeprom: baseboard_eeprom@50 {

		compatible = "at,24c256";

		reg = <0x50>;



		#address-cells = <1>;

		#size-cells = <1>;

		baseboard_data: baseboard_data@0 {

			reg = <0 0x100>;

		};

	};

};



&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins>;



	status = "okay";

	clock-frequency = <100000>;



	cape_eeprom0: cape_eeprom0@54 {

		compatible = "at,24c256";

		reg = <0x54>;

		#address-cells = <1>;

		#size-cells = <1>;

		cape0_data: cape_data@0 {

			reg = <0 0x100>;

		};

	};



	cape_eeprom1: cape_eeprom1@55 {

		compatible = "at,24c256";

		reg = <0x55>;

		#address-cells = <1>;

		#size-cells = <1>;

		cape1_data: cape_data@0 {

			reg = <0 0x100>;

		};

	};



	cape_eeprom2: cape_eeprom2@56 {

		compatible = "at,24c256";

		reg = <0x56>;

		#address-cells = <1>;

		#size-cells = <1>;

		cape2_data: cape_data@0 {

			reg = <0 0x100>;

		};

	};



	cape_eeprom3: cape_eeprom3@57 {

		compatible = "at,24c256";

		reg = <0x57>;

		#address-cells = <1>;

		#size-cells = <1>;

		cape3_data: cape_data@0 {

			reg = <0 0x100>;

		};

	};

};





/include/ "tps65217.dtsi"

arch/arm/boot/dts/am335x-evm.dts

+81 −0
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ 
/dts-v1/;



#include "am33xx.dtsi"

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	model = "TI AM335x EVM";
@@ -38,6 +39,20 @@ 
		regulator-boot-on;

	};



	wlan_en_reg: fixedregulator@2 {

		compatible = "regulator-fixed";

		regulator-name = "wlan-en-regulator";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;



		/* WLAN_EN GPIO for this board - Bank1, pin16 */

		gpio = <&gpio1 16 0>;



		/* WLAN card specific delay */

		startup-delay-us = <70000>;

		enable-active-high;

	};



	matrix_keypad: matrix_keypad@0 {

		compatible = "gpio-matrix-keypad";

		debounce-delay-ms = <5>;
@@ -176,6 +191,15 @@ 
		>;

	};



	uart1_pins: pinmux_uart1_pins {

		pinctrl-single,pins = <

			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */

			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */

			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */

			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */

		>;

	};



	clkout2_pin: pinmux_clkout2_pin {

		pinctrl-single,pins = <

			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
@@ -266,6 +290,25 @@ 
		>;

	};



	mmc3_pins: pinmux_mmc3_pins {

		pinctrl-single,pins = <

			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */

			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */

			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */

			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */

			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */

			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */

		>;

	};



	wlan_pins: pinmux_wlan_pins {

		pinctrl-single,pins = <

			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */

			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */

			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */

		>;

	};



	lcd_pins_s0: lcd_pins_s0 {

		pinctrl-single,pins = <

			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
@@ -323,6 +366,13 @@ 
	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>;



	status = "okay";

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins>;
@@ -665,6 +715,37 @@ 
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;

};



&mmc3 {

	/* these are on the crossbar and are outlined in the

	   xbar-event-map element */

	dmas = <&edma 12

		&edma 13>;

	dma-names = "tx", "rx";

	status = "okay";

	vmmc-supply = <&wlan_en_reg>;

	bus-width = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins &wlan_pins>;

	ti,non-removable;

	ti,needs-special-hs-handling;

	cap-power-off-card;

	keep-power-in-suspend;



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@0 {

		compatible = "ti,wl1835";

		reg = <2>;

		interrupt-parent = <&gpio3>;

		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;

	};

};



&edma {

	ti,edma-xbar-event-map = /bits/ 16 <1 12

					    2 13>;

};



&sham {

	status = "okay";

};

arch/arm/boot/dts/am3517.dtsi

+11 −0
Original line number Diff line number Diff line
@@ -60,6 +60,17 @@ 
			dma-names = "tx", "rx";

			clock-frequency = <48000000>;

		};



		omap3_pmx_core2: pinmux@480025d8 {

			compatible = "ti,omap3-padconf", "pinctrl-single";

			reg = <0x480025d8 0x24>;

			#address-cells = <1>;

			#size-cells = <0>;

			#interrupt-cells = <1>;

			interrupt-controller;

			pinctrl-single,register-width = <16>;

			pinctrl-single,function-mask = <0xff1f>;

		};

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE