Commit 531c633d authored by Bob Moore's avatar Bob Moore Committed by Len Brown
Browse files

ACPICA: Split out PM1 status registers from the FADT 



Add new globals for the PM1 status registers (A/B), similar to the
way the PM1 enable registers are handled. Instead of overloading
the FADT Event Register blocks. This makes the code clearer and
less prone to error.

Signed-off-by: default avatarBob Moore <robert.moore@intel.com>
Signed-off-by: default avatarLin Ming <ming.m.lin@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 6fc69d8b

drivers/acpi/acpica/acglobal.h

+4 −1
Original line number Diff line number Diff line
@@ -148,9 +148,12 @@ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; 
ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT;

ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS;



/* These addresses are calculated from FADT address values */

/* These addresses are calculated from the FADT Event Block addresses */



ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status;

ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;



ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_status;

ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;



/*

drivers/acpi/acpica/hwregs.c

+10 −8
Original line number Diff line number Diff line
@@ -72,21 +72,23 @@ acpi_status acpi_hw_clear_acpi_status(void) 


	ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",

			  ACPI_BITMASK_ALL_FIXED_STATUS,

			  (u16) acpi_gbl_FADT.xpm1a_event_block.address));

			  (u16) acpi_gbl_xpm1a_status.address));



	lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);



	/* Clear the fixed events */



	status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,

					ACPI_BITMASK_ALL_FIXED_STATUS);

	if (ACPI_FAILURE(status)) {

		goto unlock_and_exit;

	}



	/* Clear the fixed events */

	/* Write PM1B register if present */



	if (acpi_gbl_FADT.xpm1b_event_block.address) {

	if (acpi_gbl_xpm1b_status.address) {

		status = acpi_write(ACPI_BITMASK_ALL_FIXED_STATUS,

				    &acpi_gbl_FADT.xpm1b_event_block);

				    &acpi_gbl_xpm1b_status);

		if (ACPI_FAILURE(status)) {

			goto unlock_and_exit;

		}
@@ -150,14 +152,14 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) 
	switch (register_id) {

	case ACPI_REGISTER_PM1_STATUS:	/* 16-bit access */



		status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_event_block);

		status = acpi_read(&value1, &acpi_gbl_xpm1a_status);

		if (ACPI_FAILURE(status)) {

			goto exit;

		}



		/* PM1B is optional */



		status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_event_block);

		status = acpi_read(&value2, &acpi_gbl_xpm1b_status);

		value1 |= value2;

		break;
@@ -267,14 +269,14 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) 


		/* Now we can write the data */



		status = acpi_write(value, &acpi_gbl_FADT.xpm1a_event_block);

		status = acpi_write(value, &acpi_gbl_xpm1a_status);

		if (ACPI_FAILURE(status)) {

			goto exit;

		}



		/* PM1B is optional */



		status = acpi_write(value, &acpi_gbl_FADT.xpm1b_event_block);

		status = acpi_write(value, &acpi_gbl_xpm1b_status);

		break;



	case ACPI_REGISTER_PM1_ENABLE:	/* 16-bit access */

drivers/acpi/acpica/tbfadt.c

+133 −113
Original line number Diff line number Diff line
@@ -57,6 +57,8 @@ static void acpi_tb_convert_fadt(void); 


static void acpi_tb_validate_fadt(void);



static void acpi_tb_setup_fadt_registers(void);



/* Table for conversion of FADT to common internal format and FADT validation */



typedef struct acpi_fadt_info {
@@ -132,6 +134,35 @@ static struct acpi_fadt_info fadt_info_table[] = { 


#define ACPI_FADT_INFO_ENTRIES        (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))



/* Table used to split Event Blocks into separate status/enable registers */



typedef struct acpi_fadt_pm_info {

	struct acpi_generic_address *target;

	u8 source;

	u8 register_num;



} acpi_fadt_pm_info;



static struct acpi_fadt_pm_info fadt_pm_info_table[] = {

	{&acpi_gbl_xpm1a_status,

	 ACPI_FADT_OFFSET(xpm1a_event_block),

	 0},



	{&acpi_gbl_xpm1a_enable,

	 ACPI_FADT_OFFSET(xpm1a_event_block),

	 1},



	{&acpi_gbl_xpm1b_status,

	 ACPI_FADT_OFFSET(xpm1b_event_block),

	 0},



	{&acpi_gbl_xpm1b_enable,

	 ACPI_FADT_OFFSET(xpm1b_event_block),

	 1}

};



#define ACPI_FADT_PM_INFO_ENTRIES   (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))



/*******************************************************************************

 *

 * FUNCTION:    acpi_tb_init_generic_address
@@ -207,7 +238,7 @@ void acpi_tb_parse_fadt(u32 table_index) 
	 */

	(void)acpi_tb_verify_checksum(table, length);



	/* Obtain a local copy of the FADT in common ACPI 2.0+ format */

	/* Create a local copy of the FADT in common ACPI 2.0+ format */



	acpi_tb_create_local_fadt(table, length);
@@ -265,11 +296,17 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) 
	ACPI_MEMCPY(&acpi_gbl_FADT, table,

		    ACPI_MIN(length, sizeof(struct acpi_table_fadt)));



	/*

	 * 1) Convert the local copy of the FADT to the common internal format

	 * 2) Validate some of the important values within the FADT

	 */

	/* Convert the local copy of the FADT to the common internal format */



	acpi_tb_convert_fadt();



	/* Validate FADT values now, before we make any changes */



	acpi_tb_validate_fadt();



	/* Initialize the global ACPI register structures */



	acpi_tb_setup_fadt_registers();

}



/*******************************************************************************
@@ -303,8 +340,6 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) 


static void acpi_tb_convert_fadt(void)

{

	u8 pm1_register_bit_width;

	u8 pm1_register_byte_width;

	struct acpi_generic_address *target64;

	u32 i;
@@ -379,112 +414,6 @@ static void acpi_tb_convert_fadt(void) 
									  address32));

		}

	}



	/* Validate FADT values now, before we make any changes */



	acpi_tb_validate_fadt();



	/*

	 * Optionally check all register lengths against the default values and

	 * update them if they are incorrect.

	 */

	if (acpi_gbl_use_default_register_widths) {

		for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {

			target64 =

			    ACPI_ADD_PTR(struct acpi_generic_address,

					 &acpi_gbl_FADT,

					 fadt_info_table[i].address64);



			/*

			 * If a valid register (Address != 0) and the (default_length > 0)

			 * (Not a GPE register), then check the width against the default.

			 */

			if ((target64->address) &&

			    (fadt_info_table[i].default_length > 0) &&

			    (fadt_info_table[i].default_length !=

			     target64->bit_width)) {

				ACPI_WARNING((AE_INFO,

					      "Invalid length for %s: %d, using default %d",

					      fadt_info_table[i].name,

					      target64->bit_width,

					      fadt_info_table[i].

					      default_length));



				/* Incorrect size, set width to the default */



				target64->bit_width =

				    fadt_info_table[i].default_length;

			}

		}

	}



	/*

	 * Get the length of the individual PM1 registers (enable and status).

	 * Each register is defined to be (event block length / 2).

	 */

	pm1_register_bit_width =

	    (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width);

	pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width);



	/*

	 * Adjust the lengths of the PM1 Event Blocks so that they can be used to

	 * access the PM1 status register(s). Use (width / 2)

	 */

	acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width;

	acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width;



	/*

	 * Calculate separate GAS structs for the PM1 Enable registers.

	 * These addresses do not appear (directly) in the FADT, so it is

	 * useful to calculate them once, here.

	 *

	 * The PM event blocks are split into two register blocks, first is the

	 * PM Status Register block, followed immediately by the PM Enable

	 * Register block. Each is of length (xpm1x_event_block.bit_width/2).

	 *

	 * On various systems the v2 fields (and particularly the bit widths)

	 * cannot be relied upon, though. Hence resort to using the v1 length

	 * here (and warn about the inconsistency).

	 */

	if (acpi_gbl_FADT.xpm1a_event_block.bit_width

	    != acpi_gbl_FADT.pm1_event_length * 8)

		printk(KERN_WARNING "FADT: "

		       "X_PM1a_EVT_BLK.bit_width (%u) does not match"

		       " PM1_EVT_LEN (%u)\n",

		       acpi_gbl_FADT.xpm1a_event_block.bit_width,

		       acpi_gbl_FADT.pm1_event_length);



	/* The PM1A register block is required */



	acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,

				     acpi_gbl_FADT.xpm1a_event_block.space_id,

				     pm1_register_byte_width,

				     (acpi_gbl_FADT.xpm1a_event_block.address +

				      pm1_register_byte_width));

	/* Don't forget to copy space_id of the GAS */

	acpi_gbl_xpm1a_enable.space_id =

	    acpi_gbl_FADT.xpm1a_event_block.space_id;



	/* The PM1B register block is optional, ignore if not present */



	if (acpi_gbl_FADT.xpm1b_event_block.address) {

		if (acpi_gbl_FADT.xpm1b_event_block.bit_width

		    != acpi_gbl_FADT.pm1_event_length * 8)

			printk(KERN_WARNING "FADT: "

			       "X_PM1b_EVT_BLK.bit_width (%u) does not match"

			       " PM1_EVT_LEN (%u)\n",

			       acpi_gbl_FADT.xpm1b_event_block.bit_width,

			       acpi_gbl_FADT.pm1_event_length);

		acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,

					     acpi_gbl_FADT.xpm1b_event_block.space_id,

					     pm1_register_byte_width,

					     (acpi_gbl_FADT.xpm1b_event_block.

					      address + pm1_register_byte_width));

		/* Don't forget to copy space_id of the GAS */

		acpi_gbl_xpm1b_enable.space_id =

		    acpi_gbl_FADT.xpm1b_event_block.space_id;



	}

}



/******************************************************************************
@@ -607,3 +536,94 @@ static void acpi_tb_validate_fadt(void) 
		}

	}

}



/******************************************************************************

 *

 * FUNCTION:    acpi_tb_setup_fadt_registers

 *

 * PARAMETERS:  None, uses acpi_gbl_FADT.

 *

 * RETURN:      None

 *

 * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,

 *              force FADT register definitions to their default lengths.

 *

 ******************************************************************************/



static void acpi_tb_setup_fadt_registers(void)

{

	struct acpi_generic_address *target64;

	struct acpi_generic_address *source64;

	u8 pm1_register_byte_width;

	u32 i;



	/*

	 * Optionally check all register lengths against the default values and

	 * update them if they are incorrect.

	 */

	if (acpi_gbl_use_default_register_widths) {

		for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {

			target64 =

			    ACPI_ADD_PTR(struct acpi_generic_address,

					 &acpi_gbl_FADT,

					 fadt_info_table[i].address64);



			/*

			 * If a valid register (Address != 0) and the (default_length > 0)

			 * (Not a GPE register), then check the width against the default.

			 */

			if ((target64->address) &&

			    (fadt_info_table[i].default_length > 0) &&

			    (fadt_info_table[i].default_length !=

			     target64->bit_width)) {

				ACPI_WARNING((AE_INFO,

					      "Invalid length for %s: %d, using default %d",

					      fadt_info_table[i].name,

					      target64->bit_width,

					      fadt_info_table[i].

					      default_length));



				/* Incorrect size, set width to the default */



				target64->bit_width =

				    fadt_info_table[i].default_length;

			}

		}

	}



	/*

	 * Get the length of the individual PM1 registers (enable and status).

	 * Each register is defined to be (event block length / 2). Extra divide

	 * by 8 converts bits to bytes.

	 */

	pm1_register_byte_width =

	    (u8)ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);



	/*

	 * Calculate separate GAS structs for the PM1x (A/B) Status and Enable

	 * registers. These addresses do not appear (directly) in the FADT, so it

	 * is useful to pre-calculate them from the PM1 Event Block definitions.

	 *

	 * The PM event blocks are split into two register blocks, first is the

	 * PM Status Register block, followed immediately by the PM Enable

	 * Register block. Each is of length (pm1_event_length/2)

	 *

	 * Note: The PM1A event block is required by the ACPI specification.

	 * However, the PM1B event block is optional and is rarely, if ever,

	 * used.

	 */



	for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {

		source64 =

		    ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,

				 fadt_pm_info_table[i].source);



		acpi_tb_init_generic_address(fadt_pm_info_table[i].target,

					     source64->space_id,

					     pm1_register_byte_width,

					     source64->address +

					     (fadt_pm_info_table[i].

					      register_num *

					      pm1_register_byte_width));

	}

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE