Commit 5238f7bc authored by John Crispin's avatar John Crispin Committed by Ralf Baechle
Browse files

GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder 



Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them
buildable.

The following 2 patches will convert the drivers to OF.

Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Patchwork: https://patchwork.linux-mips.org/patch/3838/


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 57c8cb8f

arch/mips/lantiq/xway/Makefile

+1 −1
Original line number Diff line number Diff line 
obj-y := prom.o sysctrl.o clk.o reset.o gpio.o gpio_stp.o gpio_ebu.o dma.o
 
obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o

drivers/gpio/Kconfig

+18 −0
Original line number Diff line number Diff line
@@ -96,6 +96,14 @@ config GPIO_EP93XX 
	depends on ARCH_EP93XX

	select GPIO_GENERIC



config GPIO_MM_LANTIQ

	bool "Lantiq Memory mapped GPIOs"

	depends on LANTIQ && SOC_XWAY

	help

	  This enables support for memory mapped GPIOs on the External Bus Unit

	  (EBU) found on Lantiq SoCs. The gpios are output only as they are

	  created by attaching a 16bit latch to the bus.



config GPIO_MPC5200

	def_bool y

	depends on PPC_MPC52xx
@@ -306,6 +314,16 @@ config GPIO_STMPE 
	  This enables support for the GPIOs found on the STMPE I/O

	  Expanders.



config GPIO_STP_XWAY

	bool "XWAY STP GPIOs"

	depends on SOC_XWAY

	help

	  This enables support for the Serial To Parallel (STP) unit found on

	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,

	  that can be up to 24 bit. This peripheral is aimed at driving leds.

	  Some of the gpios/leds can be auto updated by the soc with dsl and

	  phy status.



config GPIO_TC3589X

	bool "TC3589X GPIOs"

	depends on MFD_TC3589X

drivers/gpio/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o 
obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o

obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o

obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o

obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o

obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o

obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o

obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
@@ -49,6 +50,7 @@ obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o 
obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o

obj-$(CONFIG_GPIO_SODAVILLE)	+= gpio-sodaville.o

obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o

obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o

obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o

obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o

obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE