Commit 519b4dba authored by Jyri Sarha's avatar Jyri Sarha Committed by Bartlomiej Zolnierkiewicz
Browse files

fbdev: ssd1307fb: Remove reset-active-low from the DT binding document 



Remove reset-active-low from the devicetree binding document. The actual
implementation has never been there in the driver code and there is no
reason to add it because the gpiod API supports gpio flags, including
GPIO_ACTIVE_LOW, directly trough its own devicetree binding.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Signed-off-by: default avatarJyri Sarha <jsarha@ti.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
parent 72db3335

Documentation/devicetree/bindings/display/ssd1307fb.txt

+2 −2
Original line number Diff line number Diff line
@@ -8,14 +8,14 @@ Required properties: 
         0x3c or 0x3d

  - pwm: Should contain the pwm to use according to the OF device tree PWM

         specification [0]. Only required for the ssd1307.

  - reset-gpios: Should contain the GPIO used to reset the OLED display

  - reset-gpios: Should contain the GPIO used to reset the OLED display. See

                 Documentation/devicetree/bindings/gpio/gpio.txt for details.

  - solomon,height: Height in pixel of the screen driven by the controller

  - solomon,width: Width in pixel of the screen driven by the controller

  - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is

    mapped to.



Optional properties:

  - reset-active-low: Is the reset gpio is active on physical low?

  - solomon,segment-no-remap: Display needs normal (non-inverted) data column

                              to segment mapping

  - solomon,com-seq: Display uses sequential COM pin configuration

CRA Git | Maintained and supported by SUSTech CRA and CCSE