Commit 4fec9978 authored by Mika Westerberg's avatar Mika Westerberg Committed by Russell King
Browse files

ARM: 6124/1: ep93xx: SPI driver platform support code 



This patch adds platform side support code for the EP93xx SPI
driver. This includes clock, resources and muxing. There is a new
function: ep93xx_register_spi() which can be used by board support
code to register new SPI devices for the board.

This patch depends on patch
  5998/1 ep93xx: added chip revision reading function

Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarMika Westerberg <mika.westerberg@iki.fi>
Acked-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: default avatarMartin Guy <martinwguy@gmail.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 99e6a23a

arch/arm/mach-ep93xx/clock.c

+13 −0
Original line number Diff line number Diff line
@@ -96,6 +96,10 @@ static struct clk clk_keypad = { 
	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,

	.set_rate	= set_keytchclk_rate,

};

static struct clk clk_spi = {

	.parent		= &clk_xtali,

	.rate		= EP93XX_EXT_CLK_RATE,

};

static struct clk clk_pwm = {

	.parent		= &clk_xtali,

	.rate		= EP93XX_EXT_CLK_RATE,
@@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = { 
	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),

	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),

	INIT_CK("ep93xx-fb",		NULL,		&clk_video),

	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),

	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),

	INIT_CK(NULL,			"m2p0",		&clk_m2p0),

	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void) 
	/* Initialize the pll2 derived clocks */

	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);



	/*

	 * EP93xx SSP clock rate was doubled in version E2. For more information

	 * see:

	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf

	 */

	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)

		clk_spi.rate /= 2;



	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",

		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);

	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",

arch/arm/mach-ep93xx/core.c

+52 −0
Original line number Diff line number Diff line
@@ -31,10 +31,12 @@ 
#include <linux/amba/serial.h>

#include <linux/i2c.h>

#include <linux/i2c-gpio.h>

#include <linux/spi/spi.h>



#include <mach/hardware.h>

#include <mach/fb.h>

#include <mach/ep93xx_keypad.h>

#include <mach/ep93xx_spi.h>



#include <asm/mach/map.h>

#include <asm/mach/time.h>
@@ -430,6 +432,56 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, 
	platform_device_register(&ep93xx_i2c_device);

}



/*************************************************************************

 * EP93xx SPI peripheral handling

 *************************************************************************/

static struct ep93xx_spi_info ep93xx_spi_master_data;



static struct resource ep93xx_spi_resources[] = {

	{

		.start	= EP93XX_SPI_PHYS_BASE,

		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,

		.flags	= IORESOURCE_MEM,

	},

	{

		.start	= IRQ_EP93XX_SSP,

		.end	= IRQ_EP93XX_SSP,

		.flags	= IORESOURCE_IRQ,

	},

};



static struct platform_device ep93xx_spi_device = {

	.name		= "ep93xx-spi",

	.id		= 0,

	.dev		= {

		.platform_data = &ep93xx_spi_master_data,

	},

	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),

	.resource	= ep93xx_spi_resources,

};



/**

 * ep93xx_register_spi() - registers spi platform device

 * @info: ep93xx board specific spi master info (__initdata)

 * @devices: SPI devices to register (__initdata)

 * @num: number of SPI devices to register

 *

 * This function registers platform device for the EP93xx SPI controller and

 * also makes sure that SPI pins are muxed so that I2S is not using those pins.

 */

void __init ep93xx_register_spi(struct ep93xx_spi_info *info,

				struct spi_board_info *devices, int num)

{

	/*

	 * When SPI is used, we need to make sure that I2S is muxed off from

	 * SPI pins.

	 */

	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);



	ep93xx_spi_master_data = *info;

	spi_register_board_info(devices, num);

	platform_device_register(&ep93xx_spi_device);

}



/*************************************************************************

 * EP93xx LEDs

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

+1 −0
Original line number Diff line number Diff line
@@ -106,6 +106,7 @@ 


#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)



#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)

#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)



#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)

arch/arm/mach-ep93xx/include/mach/platform.h

+4 −0
Original line number Diff line number Diff line
@@ -6,9 +6,11 @@ 


struct i2c_gpio_platform_data;

struct i2c_board_info;

struct spi_board_info;

struct platform_device;

struct ep93xxfb_mach_info;

struct ep93xx_keypad_platform_data;

struct ep93xx_spi_info;



struct ep93xx_eth_data

{
@@ -44,6 +46,8 @@ unsigned int ep93xx_chip_revision(void); 
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);

void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,

			 struct i2c_board_info *devices, int num);

void ep93xx_register_spi(struct ep93xx_spi_info *info,

			 struct spi_board_info *devices, int num);

void ep93xx_register_fb(struct ep93xxfb_mach_info *data);

void ep93xx_register_pwm(int pwm0, int pwm1);

int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);

CRA Git | Maintained and supported by SUSTech CRA and CCSE