ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file (4c945e85) · Commits · 戴 / test

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -748,6 +748,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
		armada-385-db-ap.dtb \
		armada-385-linksys-caiman.dtb \
		armada-385-linksys-cobra.dtb \
		armada-388-clearfog.dtb \
		armada-388-db.dtb \
		armada-388-gp.dtb \
		armada-388-rd.dtb

arch/arm/boot/dts/armada-388-clearfog.dts

0 → 100644

+456 −0

Original line number	Diff line number	Diff line
		/*
		* Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
		*
		* Copyright (C) 2015 Russell King
		*
		* This board is in development; the contents of this file work with
		* the A1 rev 2.0 of the board, which does not represent final
		* production board. Things will change, don't expect this file to
		* remain compatible info the future.
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		* version 2 as published by the Free Software Foundation.
		*
		* This file is distributed in the hope that it will be useful
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/

		/dts-v1/;
		#include "armada-388.dtsi"
		#include "armada-38x-solidrun-microsom.dtsi"

		/ {
		model = "SolidRun Clearfog A1";
		compatible = "solidrun,clearfog-a1", "marvell,armada388",
		"marvell,armada385", "marvell,armada380";

		aliases {
		/* So that mvebu u-boot can update the MAC addresses */
		ethernet1 = &eth0;
		ethernet2 = &eth1;
		ethernet3 = &eth2;
		};

		chosen {
		stdout-path = "serial0:115200n8";
		};

		reg_3p3v: regulator-3p3v {
		compatible = "regulator-fixed";
		regulator-name = "3P3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		};

		soc {
		internal-regs {
		ethernet@30000 {
		phy-mode = "sgmii";
		status = "okay";

		fixed-link {
		speed = <1000>;
		full-duplex;
		};
		};

		ethernet@34000 {
		phy-mode = "sgmii";
		status = "okay";

		fixed-link {
		speed = <1000>;
		full-duplex;
		};
		};

		i2c@11000 {
		/* Is there anything on this? */
		clock-frequency = <100000>;
		pinctrl-0 = <&i2c0_pins>;
		pinctrl-names = "default";
		status = "okay";

		/*
		* PCA9655 GPIO expander, up to 1MHz clock.
		* 0-CON3 CLKREQ#
		* 1-CON3 PERST#
		* 2-CON2 PERST#
		* 3-CON3 W_DISABLE
		* 4-CON2 CLKREQ#
		* 5-USB3 overcurrent
		* 6-USB3 power
		* 7-CON2 W_DISABLE
		* 8-JP4 P1
		* 9-JP4 P4
		* 10-JP4 P5
		* 11-m.2 DEVSLP
		* 12-SFP_LOS
		* 13-SFP_TX_FAULT
		* 14-SFP_TX_DISABLE
		* 15-SFP_MOD_DEF0
		*/
		expander0: gpio-expander@20 {
		/*
		* This is how it should be:
		* compatible = "onnn,pca9655",
		* "nxp,pca9555";
		* but you can't do this because of
		* the way I2C works.
		*/
		compatible = "nxp,pca9555";
		gpio-controller;
		#gpio-cells = <2>;
		reg = <0x20>;

		pcie1_0_clkreq {
		gpio-hog;
		gpios = <0 GPIO_ACTIVE_LOW>;
		input;
		line-name = "pcie1.0-clkreq";
		};
		pcie1_0_w_disable {
		gpio-hog;
		gpios = <3 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "pcie1.0-w-disable";
		};
		pcie2_0_clkreq {
		gpio-hog;
		gpios = <4 GPIO_ACTIVE_LOW>;
		input;
		line-name = "pcie2.0-clkreq";
		};
		pcie2_0_w_disable {
		gpio-hog;
		gpios = <7 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "pcie2.0-w-disable";
		};
		usb3_ilimit {
		gpio-hog;
		gpios = <5 GPIO_ACTIVE_LOW>;
		input;
		line-name = "usb3-current-limit";
		};
		usb3_power {
		gpio-hog;
		gpios = <6 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "usb3-power";
		};
		m2_devslp {
		gpio-hog;
		gpios = <11 GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "m.2 devslp";
		};
		sfp_los {
		/* SFP loss of signal */
		gpio-hog;
		gpios = <12 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "sfp-los";
		};
		sfp_tx_fault {
		/* SFP laser fault */
		gpio-hog;
		gpios = <13 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "sfp-tx-fault";
		};
		sfp_tx_disable {
		/* SFP transmit disable */
		gpio-hog;
		gpios = <14 GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "sfp-tx-disable";
		};
		sfp_mod_def0 {
		/* SFP module present */
		gpio-hog;
		gpios = <15 GPIO_ACTIVE_LOW>;
		input;
		line-name = "sfp-mod-def0";
		};
		};

		/* The MCP3021 is 100kHz clock only */
		mikrobus_adc: mcp3021@4c {
		compatible = "microchip,mcp3021";
		reg = <0x4c>;
		};

		/* Also something at 0x64 */
		};

		i2c@11100 {
		/*
		* Routed to SFP, mikrobus, and PCIe.
		* SFP limits this to 100kHz, and requires
		* an AT24C01A/02/04 with address pins tied
		* low, which takes addresses 0x50 and 0x51.
		* Mikrobus doesn't specify beyond an I2C
		* bus being present.
		* PCIe uses ARP to assign addresses, or
		* 0x63-0x64.
		*/
		clock-frequency = <100000>;
		pinctrl-0 = <&clearfog_i2c1_pins>;
		pinctrl-names = "default";
		status = "okay";
		};

		mdio@72004 {
		pinctrl-0 = <&mdio_pins>;
		pinctrl-names = "default";

		phy_dedicated: ethernet-phy@0 {
		/*
		* Annoyingly, the marvell phy driver
		* configures the LED register, rather
		* than preserving reset-loaded setting.
		* We undo that rubbish here.
		*/
		marvell,reg-init = <3 16 0 0x101e>;
		reg = <0>;
		};
		};

		pinctrl@18000 {
		clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
		marvell,pins = "mpp46";
		marvell,function = "ref";
		};
		clearfog_dsa0_pins: clearfog-dsa0-pins {
		marvell,pins = "mpp23", "mpp41";
		marvell,function = "gpio";
		};
		clearfog_i2c1_pins: i2c1-pins {
		/* SFP, PCIe, mSATA, mikrobus */
		marvell,pins = "mpp26", "mpp27";
		marvell,function = "i2c1";
		};
		clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
		marvell,pins = "mpp20";
		marvell,function = "gpio";
		};
		clearfog_sdhci_pins: clearfog-sdhci-pins {
		marvell,pins = "mpp21", "mpp28",
		"mpp37", "mpp38",
		"mpp39", "mpp40";
		marvell,function = "sd0";
		};
		clearfog_spi1_cs_pins: spi1-cs-pins {
		marvell,pins = "mpp55";
		marvell,function = "spi1";
		};
		mikro_pins: mikro-pins {
		/* int: mpp22 rst: mpp29 */
		marvell,pins = "mpp22", "mpp29";
		marvell,function = "gpio";
		};
		mikro_spi_pins: mikro-spi-pins {
		marvell,pins = "mpp43";
		marvell,function = "spi1";
		};
		mikro_uart_pins: mikro-uart-pins {
		marvell,pins = "mpp24", "mpp25";
		marvell,function = "ua1";
		};
		rear_button_pins: rear-button-pins {
		marvell,pins = "mpp34";
		marvell,function = "gpio";
		};
		};

		sata@a8000 {
		/* pinctrl? */
		status = "okay";
		};

		sata@e0000 {
		/* pinctrl? */
		status = "okay";
		};

		sdhci@d8000 {
		bus-width = <4>;
		cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
		no-1-8-v;
		pinctrl-0 = <&clearfog_sdhci_pins
		&clearfog_sdhci_cd_pins>;
		pinctrl-names = "default";
		status = "okay";
		vmmc = <&reg_3p3v>;
		wp-inverted;
		};

		serial@12100 {
		/* mikrobus uart */
		pinctrl-0 = <&mikro_uart_pins>;
		pinctrl-names = "default";
		status = "okay";
		};

		spi@10680 {
		/*
		* We don't seem to have the W25Q32 on the
		* A1 Rev 2.0 boards, so disable SPI.
		* CS0: W25Q32 (doesn't appear to be present)
		* CS1:
		* CS2: mikrobus
		*/
		pinctrl-0 = <&spi1_pins
		&clearfog_spi1_cs_pins
		&mikro_spi_pins>;
		pinctrl-names = "default";
		status = "okay";

		spi-flash@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "w25q32", "jedec,spi-nor";
		reg = <0>; /* Chip select 0 */
		spi-max-frequency = <3000000>;
		status = "disabled";
		};
		};

		usb@58000 {
		/* CON3, nearest power. */
		status = "okay";
		};

		usb3@f0000 {
		/* CON2, nearest CPU, USB2 only. */
		status = "okay";
		};

		usb3@f8000 {
		/* CON7 */
		status = "okay";
		};
		};

		pcie-controller {
		status = "okay";
		/*
		* The two PCIe units are accessible through
		* the mini-PCIe connectors on the board.
		*/
		pcie@2,0 {
		/* Port 1, Lane 0. CON3, nearest power. */
		reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
		status = "okay";
		};
		pcie@3,0 {
		/* Port 2, Lane 0. CON2, nearest CPU. */
		reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
		status = "okay";
		};
		};
		};

		dsa@0 {
		compatible = "marvell,dsa";
		dsa,ethernet = <&eth1>;
		dsa,mii-bus = <&mdio>;
		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
		pinctrl-names = "default";
		#address-cells = <2>;
		#size-cells = <0>;

		switch@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <4 0>;

		port@0 {
		reg = <0>;
		label = "lan1";
		};

		port@1 {
		reg = <1>;
		label = "lan2";
		};

		port@2 {
		reg = <2>;
		label = "lan3";
		};

		port@3 {
		reg = <3>;
		label = "lan4";
		};

		port@4 {
		reg = <4>;
		label = "lan5";
		};

		port@5 {
		reg = <5>;
		label = "cpu";
		};

		port@6 {
		/* 88E1512 external phy */
		reg = <6>;
		label = "lan6";
		fixed-link {
		speed = <1000>;
		full-duplex;
		};
		};
		};
		};

		gpio-keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&rear_button_pins>;
		pinctrl-names = "default";

		button_0 {
		/* The rear SW3 button */
		label = "Rear Button";
		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
		linux,can-disable;
		linux,code = <BTN_0>;
		};
		};
		};

arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi

0 → 100644

+115 −0

Original line number	Diff line number	Diff line
		/*
		* Device Tree file for SolidRun Armada 38x Microsom
		*
		* Copyright (C) 2015 Russell King
		*
		* This board is in development; the contents of this file work with
		* the A1 rev 2.0 of the board, which does not represent final
		* production board. Things will change, don't expect this file to
		* remain compatible info the future.
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		* version 2 as published by the Free Software Foundation.
		*
		* This file is distributed in the hope that it will be useful
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/
		#include <dt-bindings/input/input.h>
		#include <dt-bindings/gpio/gpio.h>

		/ {
		memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>; /* 256 MB */
		};

		soc {
		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
		MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
		MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
		MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;

		internal-regs {
		ethernet@70000 {
		pinctrl-0 = <&ge0_rgmii_pins>;
		pinctrl-names = "default";
		phy = <&phy_dedicated>;
		phy-mode = "rgmii-id";
		status = "okay";
		};

		mdio@72004 {
		/*
		* Add the phy clock here, so the phy can be
		* accessed to read its IDs prior to binding
		* with the driver.
		*/
		pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
		pinctrl-names = "default";

		phy_dedicated: ethernet-phy@0 {
		/*
		* Annoyingly, the marvell phy driver
		* configures the LED register, rather
		* than preserving reset-loaded setting.
		* We undo that rubbish here.
		*/
		marvell,reg-init = <3 16 0 0x101e>;
		reg = <0>;
		};
		};

		pinctrl@18000 {
		microsom_phy_clk_pins: microsom-phy-clk-pins {
		marvell,pins = "mpp45";
		marvell,function = "ref";
		};
		};

		rtc@a3800 {
		/*
		* If the rtc doesn't work, run "date reset"
		* twice in u-boot.
		*/
		status = "okay";
		};

		serial@12000 {
		pinctrl-0 = <&uart0_pins>;
		pinctrl-names = "default";
		status = "okay";
		};
		};
		};
		};

Admin message