Commit 4c1e9aa4 authored by David Milburn's avatar David Milburn Committed by Jeff Garzik
Browse files

libata: ahci enclosure management bios workaround 



During driver initialization ahci_start_port may not be able
to turn LEDs off because the hardware may still be transmitting
a message. And since the BIOS may not be setting the LEDs to
off the drive LEDs may end up in a fault state. This has
been seen on ICH9r and ICH10r when configured in AHCI mode
instead of RAID mode, this patch doesn't key off a specific
set of device IDs but will give the EM transmit bit a chance
to clear if busy.

Signed-off-by: default avatarDavid Milburn <dmilburn@redhat.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 0c659b82

drivers/ata/ahci.c

+15 −2
Original line number Diff line number Diff line
@@ -78,6 +78,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, 
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,

					ssize_t size);

#define MAX_SLOTS 8

#define MAX_RETRY 15



enum {

	AHCI_PCI_BAR		= 5,
@@ -1115,6 +1116,8 @@ static void ahci_start_port(struct ata_port *ap) 
	struct ahci_port_priv *pp = ap->private_data;

	struct ata_link *link;

	struct ahci_em_priv *emp;

	ssize_t rc;

	int i;



	/* enable FIS reception */

	ahci_start_fis_rx(ap);
@@ -1126,7 +1129,17 @@ static void ahci_start_port(struct ata_port *ap) 
	if (ap->flags & ATA_FLAG_EM) {

		ata_for_each_link(link, ap, EDGE) {

			emp = &pp->em_priv[link->pmp];

			ahci_transmit_led_message(ap, emp->led_state, 4);



			/* EM Transmit bit maybe busy during init */

			for (i = 0; i < MAX_RETRY; i++) {

				rc = ahci_transmit_led_message(ap,

							       emp->led_state,

							       4);

				if (rc == -EBUSY)

					udelay(100);

				else

					break;

			}

		}

	}
@@ -1331,7 +1344,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, 
	em_ctl = readl(mmio + HOST_EM_CTL);

	if (em_ctl & EM_CTL_TM) {

		spin_unlock_irqrestore(ap->lock, flags);

		return -EINVAL;

		return -EBUSY;

	}



	/*

CRA Git | Maintained and supported by SUSTech CRA and CCSE