Commit 4b475898 authored by Johannes Berg's avatar Johannes Berg Committed by David S. Miller
Browse files

mac80211: better rate control algorithm selection 



This patch changes mac80211's Kconfig/Makefile to:
 * select between the PID and the SIMPLE rate control
   algorithm as default
 * always allow tri-state for the rate control algorithms,
   building those that are selected 'y' into the mac80211
   module (if that is a module, otherwise all into the kernel)
 * force the default rate control algorithm to be built into
   mac80211

It also makes both rate control algorithms proper modules again
with MODULE_LICENSE etc.

Only if EMBEDDED is the user allowed to select "NONE" as default
which will cause no algorithm to be selected, this will work
only when the driver brings one itself (e.g. iwlwifi drivers).

Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 688b88a4

net/mac80211/Kconfig

+18 −19
Original line number Diff line number Diff line
@@ -13,25 +13,17 @@ config MAC80211 
	  This option enables the hardware independent IEEE 802.11

	  networking stack.



config MAC80211_RC_DEFAULT_CHOICE

	bool "Choose default rate control algorithm" if EMBEDDED

	default y

	depends on MAC80211

	---help---

	  This options enables selection of a default rate control

	  algorithm to be built into the mac80211 module.  Alternate

	  rate control algorithms might be built into the mac80211

	  module as well.

menu "Rate control algorithm selection"

	depends on MAC80211 != n



choice

	prompt "Default rate control algorithm"

	default MAC80211_RC_DEFAULT_PID

	depends on MAC80211 && MAC80211_RC_DEFAULT_CHOICE

	---help---

	  This option selects the default rate control algorithm

	  mac80211 will use. Note that this default can still be

	  overriden through the ieee80211_default_rc_algo module

	  parameter.

	  parameter if different algorithms are available.



config MAC80211_RC_DEFAULT_PID

	bool "PID controller based rate control algorithm"
@@ -50,19 +42,27 @@ config MAC80211_RC_DEFAULT_SIMPLE 
	  dumb algorithm. You should choose the PID rate control

	  instead.



config MAC80211_RC_DEFAULT_NONE

	bool "No default algorithm"

	depends on EMBEDDED

	help

	  Selecting this option will select no default algorithm

	  and allow you to not build any. Do not choose this

	  option unless you know your driver comes with another

	  suitable algorithm.

endchoice



comment "Selecting 'y' for an algorithm will"

comment "build the algorithm into mac80211."



config MAC80211_RC_DEFAULT

	string

	depends on MAC80211

	default "pid" if MAC80211_RC_DEFAULT_PID

	default "simple" if MAC80211_RC_DEFAULT_SIMPLE

	default ""



config MAC80211_RC_PID

	bool "PID controller based rate control algorithm"

	default y

	depends on MAC80211

	tristate "PID controller based rate control algorithm"

	---help---

	  This option enables a TX rate control algorithm for

	  mac80211 that uses a PID controller to select the TX
@@ -72,16 +72,15 @@ config MAC80211_RC_PID 
	  different rate control algorithm.



config MAC80211_RC_SIMPLE

	bool "Simple rate control algorithm (DEPRECATED)"

	default n

	depends on MAC80211

	tristate "Simple rate control algorithm (DEPRECATED)"

	---help---

	  This option enables a very simple, non-responsive TX

	  rate control algorithm. This algorithm is deprecated

	  and will be removed from the kernel in near future.

	  and will be removed from the kernel in the near future.

	  It has been replaced by the PID algorithm.



	  Say N unless you know what you are doing.

endmenu



config MAC80211_LEDS

	bool "Enable LED triggers"

net/mac80211/Makefile

+27 −14
Original line number Diff line number Diff line 
obj-$(CONFIG_MAC80211) += mac80211.o



mac80211-objs-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o

mac80211-objs-$(CONFIG_NET_SCHED) += wme.o

mac80211-objs-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o

mac80211-objs-$(CONFIG_MAC80211_RC_PID) += rc80211_pid_algo.o

# objects for PID algorithm

rc80211_pid-y := rc80211_pid_algo.o

rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o



mac80211-debugfs-objs-$(CONFIG_MAC80211_RC_PID) += rc80211_pid_debugfs.o

mac80211-objs-$(CONFIG_MAC80211_DEBUGFS) += \

	debugfs.o \

	debugfs_sta.o \

	debugfs_netdev.o \

	debugfs_key.o \

	$(mac80211-debugfs-objs-y)

# build helper for PID algorithm

rc-pid-y := $(rc80211_pid-y)

rc-pid-m := rc80211_pid.o



mac80211-objs := \

# mac80211 objects

mac80211-y := \

	ieee80211.o \

	ieee80211_ioctl.o \

	sta_info.o \
@@ -31,5 +27,22 @@ mac80211-objs := \ 
	tx.o \

	key.o \

	util.o \

	event.o \

	$(mac80211-objs-y)
 
	event.o



mac80211-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o

mac80211-$(CONFIG_NET_SCHED) += wme.o

mac80211-$(CONFIG_MAC80211_DEBUGFS) += \

	debugfs.o \

	debugfs_sta.o \

	debugfs_netdev.o \

	debugfs_key.o





# Build rate control algorithm(s)

CFLAGS_rc80211_simple.o += -DRC80211_SIMPLE_COMPILE

CFLAGS_rc80211_pid_algo.o += -DRC80211_PID_COMPILE

mac80211-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o

mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc-pid-$(CONFIG_MAC80211_RC_PID))



# Modular rate algorithms are assigned to mac80211-m - make separate modules

obj-m += $(mac80211-m)

net/mac80211/ieee80211.c

+11 −23
Original line number Diff line number Diff line
@@ -1323,23 +1323,19 @@ static int __init ieee80211_init(void) 


	BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));



#ifdef CONFIG_MAC80211_RC_SIMPLE

	ret = ieee80211_rate_control_register(&mac80211_rcsimple);

	ret = rc80211_simple_init();

	if (ret)

		goto fail;

#endif



#ifdef CONFIG_MAC80211_RC_PID

	ret = ieee80211_rate_control_register(&mac80211_rcpid);

	ret = rc80211_pid_init();

	if (ret)

		goto fail;

#endif

		goto fail_simple;



	ret = ieee80211_wme_register();

	if (ret) {

		printk(KERN_DEBUG "ieee80211_init: failed to "

		       "initialize WME (err=%d)\n", ret);

		goto fail;

		goto fail_pid;

	}



	ieee80211_debugfs_netdev_init();
@@ -1347,26 +1343,18 @@ static int __init ieee80211_init(void) 


	return 0;



 fail_pid:

	rc80211_simple_exit();

 fail_simple:

	rc80211_pid_exit();

 fail:



#ifdef CONFIG_MAC80211_RC_SIMPLE

	ieee80211_rate_control_unregister(&mac80211_rcsimple);

#endif

#ifdef CONFIG_MAC80211_RC_PID

	ieee80211_rate_control_unregister(&mac80211_rcpid);

#endif



	return ret;

}



static void __exit ieee80211_exit(void)

{

#ifdef CONFIG_MAC80211_RC_SIMPLE

	ieee80211_rate_control_unregister(&mac80211_rcsimple);

#endif

#ifdef CONFIG_MAC80211_RC_PID

	ieee80211_rate_control_unregister(&mac80211_rcpid);

#endif

	rc80211_simple_exit();

	rc80211_pid_exit();



	ieee80211_wme_unregister();

	ieee80211_debugfs_netdev_exit();

net/mac80211/ieee80211_rate.c

+4 −0
Original line number Diff line number Diff line
@@ -115,6 +115,10 @@ ieee80211_rate_control_ops_get(const char *name) 
		/* try default if specific alg requested but not found */

		ops = ieee80211_try_rate_control_ops_get(ieee80211_default_rc_algo);



	/* try built-in one if specific alg requested but not found */

	if (!ops && strlen(CONFIG_MAC80211_RC_DEFAULT))

		ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT);



	return ops;

}

net/mac80211/ieee80211_rate.h

+32 −6
Original line number Diff line number Diff line
@@ -58,12 +58,6 @@ struct rate_control_ref { 
	struct kref kref;

};



/* default 'simple' algorithm */

extern struct rate_control_ops mac80211_rcsimple;



/* 'PID' algorithm */

extern struct rate_control_ops mac80211_rcpid;



int ieee80211_rate_control_register(struct rate_control_ops *ops);

void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
@@ -170,4 +164,36 @@ int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, 
				 const char *name);

void rate_control_deinitialize(struct ieee80211_local *local);





/* Rate control algorithms */

#if defined(RC80211_SIMPLE_COMPILE) || \

	(defined(CONFIG_MAC80211_RC_SIMPLE) && \

	 !defined(CONFIG_MAC80211_RC_SIMPLE_MODULE))

extern int rc80211_simple_init(void);

extern void rc80211_simple_exit(void);

#else

static inline int rc80211_simple_init(void)

{

	return 0;

}

static inline void rc80211_simple_exit(void)

{

}

#endif



#if defined(RC80211_PID_COMPILE) || \

	(defined(CONFIG_MAC80211_RC_PID) && \

	 !defined(CONFIG_MAC80211_RC_PID_MODULE))

extern int rc80211_pid_init(void);

extern void rc80211_pid_exit(void);

#else

static inline int rc80211_pid_init(void)

{

	return 0;

}

static inline void rc80211_pid_exit(void)

{

}

#endif



#endif /* IEEE80211_RATE_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE