Commit 4a2b8560 authored by Linus Walleij's avatar Linus Walleij Committed by Greg Kroah-Hartman
Browse files

tty: serial: netx: Delete driver 



The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.

Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org


Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5f9e832c

drivers/tty/serial/Kconfig

+0 −19
Original line number Diff line number Diff line
@@ -1035,25 +1035,6 @@ config SERIAL_VT8500_CONSOLE 
	depends on SERIAL_VT8500=y

	select SERIAL_CORE_CONSOLE



config SERIAL_NETX

	tristate "NetX serial port support"

	depends on ARCH_NETX

	select SERIAL_CORE

	help

	  If you have a machine based on a Hilscher NetX SoC you

	  can enable its onboard serial port by enabling this option.



          To compile this driver as a module, choose M here: the

          module will be called netx-serial.



config SERIAL_NETX_CONSOLE

	bool "Console on NetX serial port"

	depends on SERIAL_NETX=y

	select SERIAL_CORE_CONSOLE

	help

	  If you have enabled the serial port on the Hilscher NetX SoC

	  you can make it the console by answering Y to this option.



config SERIAL_OMAP

	tristate "OMAP serial port support"

	depends on ARCH_OMAP2PLUS

drivers/tty/serial/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -59,7 +59,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o 
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o

obj-$(CONFIG_SERIAL_MSM) += msm_serial.o

obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o

obj-$(CONFIG_SERIAL_NETX) += netx-serial.o

obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o

obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o

obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o

drivers/tty/serial/netx-serial.c

deleted100644 → 0
+0 −733
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix

 */



#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)

#define SUPPORT_SYSRQ

#endif



#include <linux/device.h>

#include <linux/module.h>

#include <linux/ioport.h>

#include <linux/init.h>

#include <linux/console.h>

#include <linux/sysrq.h>

#include <linux/platform_device.h>

#include <linux/tty.h>

#include <linux/tty_flip.h>

#include <linux/serial_core.h>

#include <linux/serial.h>



#include <asm/io.h>

#include <asm/irq.h>

#include <mach/hardware.h>

#include <mach/netx-regs.h>



/* We've been assigned a range on the "Low-density serial ports" major */

#define SERIAL_NX_MAJOR	204

#define MINOR_START	170



enum uart_regs {

	UART_DR              = 0x00,

	UART_SR              = 0x04,

	UART_LINE_CR         = 0x08,

	UART_BAUDDIV_MSB     = 0x0c,

	UART_BAUDDIV_LSB     = 0x10,

	UART_CR              = 0x14,

	UART_FR              = 0x18,

	UART_IIR             = 0x1c,

	UART_ILPR            = 0x20,

	UART_RTS_CR          = 0x24,

	UART_RTS_LEAD        = 0x28,

	UART_RTS_TRAIL       = 0x2c,

	UART_DRV_ENABLE      = 0x30,

	UART_BRM_CR          = 0x34,

	UART_RXFIFO_IRQLEVEL = 0x38,

	UART_TXFIFO_IRQLEVEL = 0x3c,

};



#define SR_FE (1<<0)

#define SR_PE (1<<1)

#define SR_BE (1<<2)

#define SR_OE (1<<3)



#define LINE_CR_BRK       (1<<0)

#define LINE_CR_PEN       (1<<1)

#define LINE_CR_EPS       (1<<2)

#define LINE_CR_STP2      (1<<3)

#define LINE_CR_FEN       (1<<4)

#define LINE_CR_5BIT      (0<<5)

#define LINE_CR_6BIT      (1<<5)

#define LINE_CR_7BIT      (2<<5)

#define LINE_CR_8BIT      (3<<5)

#define LINE_CR_BITS_MASK (3<<5)



#define CR_UART_EN (1<<0)

#define CR_SIREN   (1<<1)

#define CR_SIRLP   (1<<2)

#define CR_MSIE    (1<<3)

#define CR_RIE     (1<<4)

#define CR_TIE     (1<<5)

#define CR_RTIE    (1<<6)

#define CR_LBE     (1<<7)



#define FR_CTS  (1<<0)

#define FR_DSR  (1<<1)

#define FR_DCD  (1<<2)

#define FR_BUSY (1<<3)

#define FR_RXFE (1<<4)

#define FR_TXFF (1<<5)

#define FR_RXFF (1<<6)

#define FR_TXFE (1<<7)



#define IIR_MIS (1<<0)

#define IIR_RIS (1<<1)

#define IIR_TIS (1<<2)

#define IIR_RTIS (1<<3)

#define IIR_MASK 0xf



#define RTS_CR_AUTO (1<<0)

#define RTS_CR_RTS  (1<<1)

#define RTS_CR_COUNT (1<<2)

#define RTS_CR_MOD2  (1<<3)

#define RTS_CR_RTS_POL (1<<4)

#define RTS_CR_CTS_CTR (1<<5)

#define RTS_CR_CTS_POL (1<<6)

#define RTS_CR_STICK   (1<<7)



#define UART_PORT_SIZE 0x40

#define DRIVER_NAME "netx-uart"



struct netx_port {

	struct uart_port	port;

};



static void netx_stop_tx(struct uart_port *port)

{

	unsigned int val;

	val = readl(port->membase + UART_CR);

	writel(val & ~CR_TIE,  port->membase + UART_CR);

}



static void netx_stop_rx(struct uart_port *port)

{

	unsigned int val;

	val = readl(port->membase + UART_CR);

	writel(val & ~CR_RIE,  port->membase + UART_CR);

}



static void netx_enable_ms(struct uart_port *port)

{

	unsigned int val;

	val = readl(port->membase + UART_CR);

	writel(val | CR_MSIE, port->membase + UART_CR);

}



static inline void netx_transmit_buffer(struct uart_port *port)

{

	struct circ_buf *xmit = &port->state->xmit;



	if (port->x_char) {

		writel(port->x_char, port->membase + UART_DR);

		port->icount.tx++;

		port->x_char = 0;

		return;

	}



	if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {

		netx_stop_tx(port);

		return;

	}



	do {

		/* send xmit->buf[xmit->tail]

		 * out the port here */

		writel(xmit->buf[xmit->tail], port->membase + UART_DR);

		xmit->tail = (xmit->tail + 1) &

		         (UART_XMIT_SIZE - 1);

		port->icount.tx++;

		if (uart_circ_empty(xmit))

			break;

	} while (!(readl(port->membase + UART_FR) & FR_TXFF));



	if (uart_circ_empty(xmit))

		netx_stop_tx(port);

}



static void netx_start_tx(struct uart_port *port)

{

	writel(

	    readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR);



	if (!(readl(port->membase + UART_FR) & FR_TXFF))

		netx_transmit_buffer(port);

}



static unsigned int netx_tx_empty(struct uart_port *port)

{

	return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT;

}



static void netx_txint(struct uart_port *port)

{

	struct circ_buf *xmit = &port->state->xmit;



	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {

		netx_stop_tx(port);

		return;

	}



	netx_transmit_buffer(port);



	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

		uart_write_wakeup(port);

}



static void netx_rxint(struct uart_port *port, unsigned long *flags)

{

	unsigned char rx, flg, status;



	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {

		rx = readl(port->membase + UART_DR);

		flg = TTY_NORMAL;

		port->icount.rx++;

		status = readl(port->membase + UART_SR);

		if (status & SR_BE) {

			writel(0, port->membase + UART_SR);

			if (uart_handle_break(port))

				continue;

		}



		if (unlikely(status & (SR_FE | SR_PE | SR_OE))) {



			if (status & SR_PE)

				port->icount.parity++;

			else if (status & SR_FE)

				port->icount.frame++;

			if (status & SR_OE)

				port->icount.overrun++;



			status &= port->read_status_mask;



			if (status & SR_BE)

				flg = TTY_BREAK;

			else if (status & SR_PE)

				flg = TTY_PARITY;

			else if (status & SR_FE)

				flg = TTY_FRAME;

		}



		if (uart_handle_sysrq_char(port, rx))

			continue;



		uart_insert_char(port, status, SR_OE, rx, flg);

	}



	spin_unlock_irqrestore(&port->lock, *flags);

	tty_flip_buffer_push(&port->state->port);

	spin_lock_irqsave(&port->lock, *flags);

}



static irqreturn_t netx_int(int irq, void *dev_id)

{

	struct uart_port *port = dev_id;

	unsigned long flags;

	unsigned char status;



	spin_lock_irqsave(&port->lock,flags);



	status = readl(port->membase + UART_IIR) & IIR_MASK;

	while (status) {

		if (status & IIR_RIS)

			netx_rxint(port, &flags);

		if (status & IIR_TIS)

			netx_txint(port);

		if (status & IIR_MIS) {

			if (readl(port->membase + UART_FR) & FR_CTS)

				uart_handle_cts_change(port, 1);

			else

				uart_handle_cts_change(port, 0);

		}

		writel(0, port->membase + UART_IIR);

		status = readl(port->membase + UART_IIR) & IIR_MASK;

	}



	spin_unlock_irqrestore(&port->lock,flags);

	return IRQ_HANDLED;

}



static unsigned int netx_get_mctrl(struct uart_port *port)

{

	unsigned int ret = TIOCM_DSR | TIOCM_CAR;



	if (readl(port->membase + UART_FR) & FR_CTS)

		ret |= TIOCM_CTS;



	return ret;

}



static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)

{

	unsigned int val;



	/* FIXME: Locking needed ? */

	if (mctrl & TIOCM_RTS) {

		val = readl(port->membase + UART_RTS_CR);

		writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR);

	}

}



static void netx_break_ctl(struct uart_port *port, int break_state)

{

	unsigned int line_cr;

	spin_lock_irq(&port->lock);



	line_cr = readl(port->membase + UART_LINE_CR);

	if (break_state != 0)

		line_cr |= LINE_CR_BRK;

	else

		line_cr &= ~LINE_CR_BRK;

	writel(line_cr, port->membase + UART_LINE_CR);



	spin_unlock_irq(&port->lock);

}



static int netx_startup(struct uart_port *port)

{

	int ret;



	ret = request_irq(port->irq, netx_int, 0,

			     DRIVER_NAME, port);

	if (ret) {

		dev_err(port->dev, "unable to grab irq%d\n",port->irq);

		goto exit;

	}



	writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN,

		port->membase + UART_LINE_CR);



	writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN,

		port->membase + UART_CR);



exit:

	return ret;

}



static void netx_shutdown(struct uart_port *port)

{

	writel(0, port->membase + UART_CR) ;



	free_irq(port->irq, port);

}



static void

netx_set_termios(struct uart_port *port, struct ktermios *termios,

		   struct ktermios *old)

{

	unsigned int baud, quot;

	unsigned char old_cr;

	unsigned char line_cr = LINE_CR_FEN;

	unsigned char rts_cr = 0;



	switch (termios->c_cflag & CSIZE) {

	case CS5:

		line_cr |= LINE_CR_5BIT;

		break;

	case CS6:

		line_cr |= LINE_CR_6BIT;

		break;

	case CS7:

		line_cr |= LINE_CR_7BIT;

		break;

	case CS8:

		line_cr |= LINE_CR_8BIT;

		break;

	}



	if (termios->c_cflag & CSTOPB)

		line_cr |= LINE_CR_STP2;



	if (termios->c_cflag & PARENB) {

		line_cr |= LINE_CR_PEN;

		if (!(termios->c_cflag & PARODD))

			line_cr |= LINE_CR_EPS;

	}



	if (termios->c_cflag & CRTSCTS)

		rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL;



	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);

	quot = baud * 4096;

	quot /= 1000;

	quot *= 256;

	quot /= 100000;



	spin_lock_irq(&port->lock);



	uart_update_timeout(port, termios->c_cflag, baud);



	old_cr = readl(port->membase + UART_CR);



	/* disable interrupts */

	writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE),

		port->membase + UART_CR);



	/* drain transmitter */

	while (readl(port->membase + UART_FR) & FR_BUSY);



	/* disable UART */

	writel(old_cr & ~CR_UART_EN, port->membase + UART_CR);



	/* modem status interrupts */

	old_cr &= ~CR_MSIE;

	if (UART_ENABLE_MS(port, termios->c_cflag))

		old_cr |= CR_MSIE;



	writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB);

	writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB);

	writel(line_cr, port->membase + UART_LINE_CR);



	writel(rts_cr, port->membase + UART_RTS_CR);



	/*

	 * Characters to ignore

	 */

	port->ignore_status_mask = 0;

	if (termios->c_iflag & IGNPAR)

		port->ignore_status_mask |= SR_PE;

	if (termios->c_iflag & IGNBRK) {

		port->ignore_status_mask |= SR_BE;

		/*

		 * If we're ignoring parity and break indicators,

		 * ignore overruns too (for real raw support).

		 */

		if (termios->c_iflag & IGNPAR)

			port->ignore_status_mask |= SR_PE;

	}



	port->read_status_mask = 0;

	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))

		port->read_status_mask |= SR_BE;

	if (termios->c_iflag & INPCK)

		port->read_status_mask |= SR_PE | SR_FE;



	writel(old_cr, port->membase + UART_CR);



	spin_unlock_irq(&port->lock);

}



static const char *netx_type(struct uart_port *port)

{

	return port->type == PORT_NETX ? "NETX" : NULL;

}



static void netx_release_port(struct uart_port *port)

{

	release_mem_region(port->mapbase, UART_PORT_SIZE);

}



static int netx_request_port(struct uart_port *port)

{

	return request_mem_region(port->mapbase, UART_PORT_SIZE,

			DRIVER_NAME) != NULL ? 0 : -EBUSY;

}



static void netx_config_port(struct uart_port *port, int flags)

{

	if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0)

		port->type = PORT_NETX;

}



static int

netx_verify_port(struct uart_port *port, struct serial_struct *ser)

{

	int ret = 0;



	if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX)

		ret = -EINVAL;



	return ret;

}



static struct uart_ops netx_pops = {

	.tx_empty	= netx_tx_empty,

	.set_mctrl	= netx_set_mctrl,

	.get_mctrl	= netx_get_mctrl,

	.stop_tx	= netx_stop_tx,

	.start_tx	= netx_start_tx,

	.stop_rx	= netx_stop_rx,

	.enable_ms	= netx_enable_ms,

	.break_ctl	= netx_break_ctl,

	.startup	= netx_startup,

	.shutdown	= netx_shutdown,

	.set_termios	= netx_set_termios,

	.type		= netx_type,

	.release_port	= netx_release_port,

	.request_port	= netx_request_port,

	.config_port	= netx_config_port,

	.verify_port	= netx_verify_port,

};



static struct netx_port netx_ports[] = {

	{

	.port = {

		.type = PORT_NETX,

		.iotype = UPIO_MEM,

		.membase = (char __iomem *)io_p2v(NETX_PA_UART0),

		.mapbase = NETX_PA_UART0,

		.irq = NETX_IRQ_UART0,

		.uartclk = 100000000,

		.fifosize = 16,

		.flags = UPF_BOOT_AUTOCONF,

		.ops = &netx_pops,

		.line = 0,

	},

	}, {

	.port = {

		.type = PORT_NETX,

		.iotype = UPIO_MEM,

		.membase = (char __iomem *)io_p2v(NETX_PA_UART1),

		.mapbase = NETX_PA_UART1,

		.irq = NETX_IRQ_UART1,

		.uartclk = 100000000,

		.fifosize = 16,

		.flags = UPF_BOOT_AUTOCONF,

		.ops = &netx_pops,

		.line = 1,

	},

	}, {

	.port = {

		.type = PORT_NETX,

		.iotype = UPIO_MEM,

		.membase = (char __iomem *)io_p2v(NETX_PA_UART2),

		.mapbase = NETX_PA_UART2,

		.irq = NETX_IRQ_UART2,

		.uartclk = 100000000,

		.fifosize = 16,

		.flags = UPF_BOOT_AUTOCONF,

		.ops = &netx_pops,

		.line = 2,

	},

	}

};



#ifdef CONFIG_SERIAL_NETX_CONSOLE



static void netx_console_putchar(struct uart_port *port, int ch)

{

	while (readl(port->membase + UART_FR) & FR_BUSY);

	writel(ch, port->membase + UART_DR);

}



static void

netx_console_write(struct console *co, const char *s, unsigned int count)

{

	struct uart_port *port = &netx_ports[co->index].port;

	unsigned char cr_save;



	cr_save = readl(port->membase + UART_CR);

	writel(cr_save | CR_UART_EN, port->membase + UART_CR);



	uart_console_write(port, s, count, netx_console_putchar);



	while (readl(port->membase + UART_FR) & FR_BUSY);

	writel(cr_save, port->membase + UART_CR);

}



static void __init

netx_console_get_options(struct uart_port *port, int *baud,

			int *parity, int *bits, int *flow)

{

	unsigned char line_cr;



	*baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) |

		readl(port->membase + UART_BAUDDIV_LSB);

	*baud *= 1000;

	*baud /= 4096;

	*baud *= 1000;

	*baud /= 256;

	*baud *= 100;



	line_cr = readl(port->membase + UART_LINE_CR);

	*parity = 'n';

	if (line_cr & LINE_CR_PEN) {

		if (line_cr & LINE_CR_EPS)

			*parity = 'e';

		else

			*parity = 'o';

	}



	switch (line_cr & LINE_CR_BITS_MASK) {

	case LINE_CR_8BIT:

		*bits = 8;

		break;

	case LINE_CR_7BIT:

		*bits = 7;

		break;

	case LINE_CR_6BIT:

		*bits = 6;

		break;

	case LINE_CR_5BIT:

		*bits = 5;

		break;

	}



	if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO)

		*flow = 'r';

}



static int __init

netx_console_setup(struct console *co, char *options)

{

	struct netx_port *sport;

	int baud = 9600;

	int bits = 8;

	int parity = 'n';

	int flow = 'n';



	/*

	 * Check whether an invalid uart number has been specified, and

	 * if so, search for the first available port that does have

	 * console support.

	 */

	if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports))

		co->index = 0;

	sport = &netx_ports[co->index];



	if (options) {

		uart_parse_options(options, &baud, &parity, &bits, &flow);

	} else {

		/* if the UART is enabled, assume it has been correctly setup

		 * by the bootloader and get the options

		 */

		if (readl(sport->port.membase + UART_CR) & CR_UART_EN) {

			netx_console_get_options(&sport->port, &baud,

			&parity, &bits, &flow);

		}



	}



	return uart_set_options(&sport->port, co, baud, parity, bits, flow);

}



static struct uart_driver netx_reg;

static struct console netx_console = {

	.name		= "ttyNX",

	.write		= netx_console_write,

	.device		= uart_console_device,

	.setup		= netx_console_setup,

	.flags		= CON_PRINTBUFFER,

	.index		= -1,

	.data		= &netx_reg,

};



static int __init netx_console_init(void)

{

	register_console(&netx_console);

	return 0;

}

console_initcall(netx_console_init);



#define NETX_CONSOLE	&netx_console

#else

#define NETX_CONSOLE	NULL

#endif



static struct uart_driver netx_reg = {

	.owner          = THIS_MODULE,

	.driver_name    = DRIVER_NAME,

	.dev_name       = "ttyNX",

	.major          = SERIAL_NX_MAJOR,

	.minor          = MINOR_START,

	.nr             = ARRAY_SIZE(netx_ports),

	.cons           = NETX_CONSOLE,

};



static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state)

{

	struct netx_port *sport = platform_get_drvdata(pdev);



	if (sport)

		uart_suspend_port(&netx_reg, &sport->port);



	return 0;

}



static int serial_netx_resume(struct platform_device *pdev)

{

	struct netx_port *sport = platform_get_drvdata(pdev);



	if (sport)

		uart_resume_port(&netx_reg, &sport->port);



	return 0;

}



static int serial_netx_probe(struct platform_device *pdev)

{

	struct uart_port *port = &netx_ports[pdev->id].port;



	dev_info(&pdev->dev, "initialising\n");



	port->dev = &pdev->dev;



	writel(1, port->membase + UART_RXFIFO_IRQLEVEL);

	uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port);

	platform_set_drvdata(pdev, &netx_ports[pdev->id]);



	return 0;

}



static int serial_netx_remove(struct platform_device *pdev)

{

	struct netx_port *sport = platform_get_drvdata(pdev);



	if (sport)

		uart_remove_one_port(&netx_reg, &sport->port);



	return 0;

}



static struct platform_driver serial_netx_driver = {

	.probe          = serial_netx_probe,

	.remove         = serial_netx_remove,



	.suspend	= serial_netx_suspend,

	.resume		= serial_netx_resume,



	.driver		= {

		.name   = DRIVER_NAME,

	},

};



static int __init netx_serial_init(void)

{

	int ret;



	printk(KERN_INFO "Serial: NetX driver\n");



	ret = uart_register_driver(&netx_reg);

	if (ret)

		return ret;



	ret = platform_driver_register(&serial_netx_driver);

	if (ret != 0)

		uart_unregister_driver(&netx_reg);



	return 0;

}



static void __exit netx_serial_exit(void)

{

	platform_driver_unregister(&serial_netx_driver);

	uart_unregister_driver(&netx_reg);

}



module_init(netx_serial_init);

module_exit(netx_serial_exit);



MODULE_AUTHOR("Sascha Hauer");

MODULE_DESCRIPTION("NetX serial port driver");

MODULE_LICENSE("GPL");

MODULE_ALIAS("platform:" DRIVER_NAME);

include/uapi/linux/serial_core.h

+0 −3
Original line number Diff line number Diff line
@@ -150,9 +150,6 @@ 


#define PORT_PNX8XXX	70



/* Hilscher netx */

#define PORT_NETX	71



/* SUN4V Hypervisor Console */

#define PORT_SUNHV	72

CRA Git | Maintained and supported by SUSTech CRA and CCSE