Commit 49d7b5bf authored by Amit Daniel Kachhap's avatar Amit Daniel Kachhap Committed by Rafael J. Wysocki
Browse files

cpufreq: exynos: Add cpufreq driver for exynos5440 



This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and
they scale at same frequency. The nature of exynos5440 clock controller is
different from previous exynos controllers so not using the common exynos
cpufreq framework. The major difference being interrupt notification for
frequency change. Also, OPP library is used for device tree parsing to get
different parameters like frequency, voltage etc. Since the opp library sorts
the frequency table in ascending order so they are again re-arranged in
descending order. This will have one-to-one mapping with the clock controller
state management logic.

Signed-off-by: default avatarAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 9c5320c8

Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt

0 → 100644
+28 −0
Original line number Diff line number Diff line 


Exynos5440 cpufreq driver

-------------------



Exynos5440 SoC cpufreq driver for CPU frequency scaling.



Required properties:

- interrupts: Interrupt to know the completion of cpu frequency change.

- operating-points: Table of frequencies and voltage CPU could be transitioned into,

	in the decreasing order. Frequency should be in KHz units and voltage

	should be in microvolts.



Optional properties:

- clock-latency: Clock monitor latency in microsecond.



All the required listed above must be defined under node cpufreq.



Example:

--------

	cpufreq@160000 {

		compatible = "samsung,exynos5440-cpufreq";

		reg = <0x160000 0x1000>;

		interrupts = <0 57 0>;

		operating-points = <

				1000000 975000

				800000  925000>;

		clock-latency = <100000>;

	};

drivers/cpufreq/Kconfig.arm

+9 −0
Original line number Diff line number Diff line
@@ -42,6 +42,15 @@ config ARM_EXYNOS5250_CPUFREQ 
	  This adds the CPUFreq driver for Samsung EXYNOS5250

	  SoC.



config ARM_EXYNOS5440_CPUFREQ

	def_bool SOC_EXYNOS5440

	depends on HAVE_CLK && PM_OPP && OF

	help

	  This adds the CPUFreq driver for Samsung EXYNOS5440

	  SoC. The nature of exynos5440 clock controller is

	  different than previous exynos controllers so not using

	  the common exynos framework.



config ARM_HIGHBANK_CPUFREQ

	tristate "Calxeda Highbank-based"

	depends on ARCH_HIGHBANK

drivers/cpufreq/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -56,6 +56,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o 
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o

obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o

obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o

obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o

obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o

obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o

obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o

drivers/cpufreq/exynos5440-cpufreq.c

0 → 100644
+478 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2013 Samsung Electronics Co., Ltd.

 *		http://www.samsung.com

 *

 * Amit Daniel Kachhap <amit.daniel@samsung.com>

 *

 * EXYNOS5440 - CPU frequency scaling support

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

*/



#include <linux/clk.h>

#include <linux/cpu.h>

#include <linux/cpufreq.h>

#include <linux/err.h>

#include <linux/interrupt.h>

#include <linux/io.h>

#include <linux/module.h>

#include <linux/of_address.h>

#include <linux/of_irq.h>

#include <linux/opp.h>

#include <linux/platform_device.h>

#include <linux/slab.h>



/* Register definitions */

#define XMU_DVFS_CTRL		0x0060

#define XMU_PMU_P0_7		0x0064

#define XMU_C0_3_PSTATE		0x0090

#define XMU_P_LIMIT		0x00a0

#define XMU_P_STATUS		0x00a4

#define XMU_PMUEVTEN		0x00d0

#define XMU_PMUIRQEN		0x00d4

#define XMU_PMUIRQ		0x00d8



/* PMU mask and shift definations */

#define P_VALUE_MASK		0x7



#define XMU_DVFS_CTRL_EN_SHIFT	0



#define P0_7_CPUCLKDEV_SHIFT	21

#define P0_7_CPUCLKDEV_MASK	0x7

#define P0_7_ATBCLKDEV_SHIFT	18

#define P0_7_ATBCLKDEV_MASK	0x7

#define P0_7_CSCLKDEV_SHIFT	15

#define P0_7_CSCLKDEV_MASK	0x7

#define P0_7_CPUEMA_SHIFT	28

#define P0_7_CPUEMA_MASK	0xf

#define P0_7_L2EMA_SHIFT	24

#define P0_7_L2EMA_MASK		0xf

#define P0_7_VDD_SHIFT		8

#define P0_7_VDD_MASK		0x7f

#define P0_7_FREQ_SHIFT		0

#define P0_7_FREQ_MASK		0xff



#define C0_3_PSTATE_VALID_SHIFT	8

#define C0_3_PSTATE_CURR_SHIFT	4

#define C0_3_PSTATE_NEW_SHIFT	0



#define PSTATE_CHANGED_EVTEN_SHIFT	0



#define PSTATE_CHANGED_IRQEN_SHIFT	0



#define PSTATE_CHANGED_SHIFT		0



/* some constant values for clock divider calculation */

#define CPU_DIV_FREQ_MAX	500

#define CPU_DBG_FREQ_MAX	375

#define CPU_ATB_FREQ_MAX	500



#define PMIC_LOW_VOLT		0x30

#define PMIC_HIGH_VOLT		0x28



#define CPUEMA_HIGH		0x2

#define CPUEMA_MID		0x4

#define CPUEMA_LOW		0x7



#define L2EMA_HIGH		0x1

#define L2EMA_MID		0x3

#define L2EMA_LOW		0x4



#define DIV_TAB_MAX	2

/* frequency unit is 20MHZ */

#define FREQ_UNIT	20

#define MAX_VOLTAGE	1550000 /* In microvolt */

#define VOLTAGE_STEP	12500	/* In microvolt */



#define CPUFREQ_NAME		"exynos5440_dvfs"

#define DEF_TRANS_LATENCY	100000



enum cpufreq_level_index {

	L0, L1, L2, L3, L4,

	L5, L6, L7, L8, L9,

};

#define CPUFREQ_LEVEL_END	(L7 + 1)



struct exynos_dvfs_data {

	void __iomem *base;

	struct resource *mem;

	int irq;

	struct clk *cpu_clk;

	unsigned int cur_frequency;

	unsigned int latency;

	struct cpufreq_frequency_table *freq_table;

	unsigned int freq_count;

	struct device *dev;

	bool dvfs_enabled;

	struct work_struct irq_work;

};



static struct exynos_dvfs_data *dvfs_info;

static DEFINE_MUTEX(cpufreq_lock);

static struct cpufreq_freqs freqs;



static int init_div_table(void)

{

	struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;

	unsigned int tmp, clk_div, ema_div, freq, volt_id;

	int i = 0;

	struct opp *opp;



	for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) {



		opp = opp_find_freq_exact(dvfs_info->dev,

					freq_tbl[i].frequency * 1000, true);

		if (IS_ERR(opp)) {

			dev_err(dvfs_info->dev,

				"failed to find valid OPP for %u KHZ\n",

				freq_tbl[i].frequency);

			return PTR_ERR(opp);

		}



		freq = freq_tbl[i].frequency / 1000; /* In MHZ */

		clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)

					<< P0_7_CPUCLKDEV_SHIFT;

		clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)

					<< P0_7_ATBCLKDEV_SHIFT;

		clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK)

					<< P0_7_CSCLKDEV_SHIFT;



		/* Calculate EMA */

		volt_id = opp_get_voltage(opp);

		volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP;

		if (volt_id < PMIC_HIGH_VOLT) {

			ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) |

				(L2EMA_HIGH << P0_7_L2EMA_SHIFT);

		} else if (volt_id > PMIC_LOW_VOLT) {

			ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) |

				(L2EMA_LOW << P0_7_L2EMA_SHIFT);

		} else {

			ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) |

				(L2EMA_MID << P0_7_L2EMA_SHIFT);

		}



		tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)

			| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));



		__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i);

	}



	return 0;

}



static void exynos_enable_dvfs(void)

{

	unsigned int tmp, i, cpu;

	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;

	/* Disable DVFS */

	__raw_writel(0,	dvfs_info->base + XMU_DVFS_CTRL);



	/* Enable PSTATE Change Event */

	tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN);

	tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT);

	 __raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN);



	/* Enable PSTATE Change IRQ */

	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN);

	tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT);

	 __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);



	/* Set initial performance index */

	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)

		if (freq_table[i].frequency == dvfs_info->cur_frequency)

			break;



	if (freq_table[i].frequency == CPUFREQ_TABLE_END) {

		dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");

		/* Assign the highest frequency */

		i = 0;

		dvfs_info->cur_frequency = freq_table[i].frequency;

	}



	dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",

						dvfs_info->cur_frequency);



	for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {

		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);

		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);

		tmp |= (i << C0_3_PSTATE_NEW_SHIFT);

		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);

	}



	/* Enable DVFS */

	__raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT,

				dvfs_info->base + XMU_DVFS_CTRL);

}



static int exynos_verify_speed(struct cpufreq_policy *policy)

{

	return cpufreq_frequency_table_verify(policy,

					      dvfs_info->freq_table);

}



static unsigned int exynos_getspeed(unsigned int cpu)

{

	return dvfs_info->cur_frequency;

}



static int exynos_target(struct cpufreq_policy *policy,

			  unsigned int target_freq,

			  unsigned int relation)

{

	unsigned int index, tmp;

	int ret = 0, i;

	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;



	mutex_lock(&cpufreq_lock);



	ret = cpufreq_frequency_table_target(policy, freq_table,

					   target_freq, relation, &index);

	if (ret)

		goto out;



	freqs.old = dvfs_info->cur_frequency;

	freqs.new = freq_table[index].frequency;



	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);



	/* Set the target frequency in all C0_3_PSTATE register */

	for_each_cpu(i, policy->cpus) {

		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4);

		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);

		tmp |= (index << C0_3_PSTATE_NEW_SHIFT);



		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4);

	}

out:

	mutex_unlock(&cpufreq_lock);

	return ret;

}



static void exynos_cpufreq_work(struct work_struct *work)

{

	unsigned int cur_pstate, index;

	struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */

	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;



	/* Ensure we can access cpufreq structures */

	if (unlikely(dvfs_info->dvfs_enabled == false))

		goto skip_work;



	mutex_lock(&cpufreq_lock);

	freqs.old = dvfs_info->cur_frequency;



	cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);

	if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)

		index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK;

	else

		index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK;



	if (likely(index < dvfs_info->freq_count)) {

		freqs.new = freq_table[index].frequency;

		dvfs_info->cur_frequency = freqs.new;

	} else {

		dev_crit(dvfs_info->dev, "New frequency out of range\n");

		freqs.new = dvfs_info->cur_frequency;

	}

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);



	cpufreq_cpu_put(policy);

	mutex_unlock(&cpufreq_lock);

skip_work:

	enable_irq(dvfs_info->irq);

}



static irqreturn_t exynos_cpufreq_irq(int irq, void *id)

{

	unsigned int tmp;



	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ);

	if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) {

		__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ);

		disable_irq_nosync(irq);

		schedule_work(&dvfs_info->irq_work);

	}

	return IRQ_HANDLED;

}



static void exynos_sort_descend_freq_table(void)

{

	struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;

	int i = 0, index;

	unsigned int tmp_freq;

	/*

	 * Exynos5440 clock controller state logic expects the cpufreq table to

	 * be in descending order. But the OPP library constructs the table in

	 * ascending order. So to make the table descending we just need to

	 * swap the i element with the N - i element.

	 */

	for (i = 0; i < dvfs_info->freq_count / 2; i++) {

		index = dvfs_info->freq_count - i - 1;

		tmp_freq = freq_tbl[i].frequency;

		freq_tbl[i].frequency = freq_tbl[index].frequency;

		freq_tbl[index].frequency = tmp_freq;

	}

}



static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)

{

	int ret;



	ret = cpufreq_frequency_table_cpuinfo(policy, dvfs_info->freq_table);

	if (ret) {

		dev_err(dvfs_info->dev, "Invalid frequency table: %d\n", ret);

		return ret;

	}



	policy->cur = dvfs_info->cur_frequency;

	policy->cpuinfo.transition_latency = dvfs_info->latency;

	cpumask_setall(policy->cpus);



	cpufreq_frequency_table_get_attr(dvfs_info->freq_table, policy->cpu);



	return 0;

}



static struct cpufreq_driver exynos_driver = {

	.flags		= CPUFREQ_STICKY,

	.verify		= exynos_verify_speed,

	.target		= exynos_target,

	.get		= exynos_getspeed,

	.init		= exynos_cpufreq_cpu_init,

	.name		= CPUFREQ_NAME,

};



static const struct of_device_id exynos_cpufreq_match[] = {

	{

		.compatible = "samsung,exynos5440-cpufreq",

	},

	{},

};

MODULE_DEVICE_TABLE(of, exynos_cpufreq_match);



static int exynos_cpufreq_probe(struct platform_device *pdev)

{

	int ret = -EINVAL;

	struct device_node *np;

	struct resource res;



	np =  pdev->dev.of_node;

	if (!np)

		return -ENODEV;



	dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL);

	if (!dvfs_info) {

		ret = -ENOMEM;

		goto err_put_node;

	}



	dvfs_info->dev = &pdev->dev;



	ret = of_address_to_resource(np, 0, &res);

	if (ret)

		goto err_put_node;



	dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res);

	if (IS_ERR(dvfs_info->base)) {

		ret = PTR_ERR(dvfs_info->base);

		goto err_put_node;

	}



	dvfs_info->irq = irq_of_parse_and_map(np, 0);

	if (!dvfs_info->irq) {

		dev_err(dvfs_info->dev, "No cpufreq irq found\n");

		ret = -ENODEV;

		goto err_put_node;

	}



	ret = of_init_opp_table(dvfs_info->dev);

	if (ret) {

		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);

		goto err_put_node;

	}



	ret = opp_init_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);

	if (ret) {

		dev_err(dvfs_info->dev,

			"failed to init cpufreq table: %d\n", ret);

		goto err_put_node;

	}

	dvfs_info->freq_count = opp_get_opp_count(dvfs_info->dev);

	exynos_sort_descend_freq_table();



	if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency))

		dvfs_info->latency = DEF_TRANS_LATENCY;



	dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk");

	if (IS_ERR(dvfs_info->cpu_clk)) {

		dev_err(dvfs_info->dev, "Failed to get cpu clock\n");

		ret = PTR_ERR(dvfs_info->cpu_clk);

		goto err_free_table;

	}



	dvfs_info->cur_frequency = clk_get_rate(dvfs_info->cpu_clk);

	if (!dvfs_info->cur_frequency) {

		dev_err(dvfs_info->dev, "Failed to get clock rate\n");

		ret = -EINVAL;

		goto err_free_table;

	}

	dvfs_info->cur_frequency /= 1000;



	INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);

	ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,

				exynos_cpufreq_irq, IRQF_TRIGGER_NONE,

				CPUFREQ_NAME, dvfs_info);

	if (ret) {

		dev_err(dvfs_info->dev, "Failed to register IRQ\n");

		goto err_free_table;

	}



	ret = init_div_table();

	if (ret) {

		dev_err(dvfs_info->dev, "Failed to initialise div table\n");

		goto err_free_table;

	}



	exynos_enable_dvfs();

	ret = cpufreq_register_driver(&exynos_driver);

	if (ret) {

		dev_err(dvfs_info->dev,

			"%s: failed to register cpufreq driver\n", __func__);

		goto err_free_table;

	}



	of_node_put(np);

	dvfs_info->dvfs_enabled = true;

	return 0;



err_free_table:

	opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);

err_put_node:

	of_node_put(np);

	dev_err(dvfs_info->dev, "%s: failed initialization\n", __func__);

	return ret;

}



static int exynos_cpufreq_remove(struct platform_device *pdev)

{

	cpufreq_unregister_driver(&exynos_driver);

	opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);

	return 0;

}



static struct platform_driver exynos_cpufreq_platdrv = {

	.driver = {

		.name	= "exynos5440-cpufreq",

		.owner	= THIS_MODULE,

		.of_match_table = exynos_cpufreq_match,

	},

	.probe		= exynos_cpufreq_probe,

	.remove		= exynos_cpufreq_remove,

};

module_platform_driver(exynos_cpufreq_platdrv);



MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>");

MODULE_DESCRIPTION("Exynos5440 cpufreq driver");

MODULE_LICENSE("GPL");

CRA Git | Maintained and supported by SUSTech CRA and CCSE