Commit 49c1d208 authored by Andrey Borzenkov's avatar Andrey Borzenkov Committed by John W. Linville
Browse files

Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig 



Since driver now lives in separate subdirectory, move Kconfig entries
in own file so they can be tweaked indepndently. It complements
"orinoco: Move sources to a subdirectory".

Signed-off-by: default avatarAndrey Borzenkov <arvidjaar@mail.ru>
Acked-by: default avatarPavel Roskin <proski@gnu.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent a2116993

drivers/net/wireless/Kconfig

+1 −121
Original line number Diff line number Diff line
@@ -194,127 +194,6 @@ config AIRO 


	  The driver can be compiled as a module and will be named "airo".



config HERMES

	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"

	depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select CRYPTO

	select CRYPTO_MICHAEL_MIC

	---help---

	  A driver for 802.11b wireless cards based on the "Hermes" or

	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast

	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)

	  - except for the Cisco/Aironet cards.  Cards supported include the

	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,

	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,

	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear

	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel

	  IPW2011, and Symbol Spectrum24 High Rate amongst others.



	  This option includes the guts of the driver, but in order to

	  actually use a card you will also need to enable support for PCMCIA

	  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.



	  You will also very likely also need the Wireless Tools in order to

	  configure your card and that /etc/pcmcia/wireless.opts works :

	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>



config HERMES_CACHE_FW_ON_INIT

	bool "Cache Hermes firmware on driver initialisation"

	depends on HERMES

	default y

	---help---

	  Say Y to cache any firmware required by the Hermes drivers

	  on startup.  The firmware will remain cached until the

	  driver is unloaded.  The cache uses 64K of RAM.



	  Otherwise load the firmware from userspace as required.  In

	  this case the driver should be unloaded and restarted

	  whenever the firmware is changed.



	  If you are not sure, say Y.



config APPLE_AIRPORT

	tristate "Apple Airport support (built-in)"

	depends on PPC_PMAC && HERMES

	help

	  Say Y here to support the Airport 802.11b wireless Ethernet hardware

	  built into the Macintosh iBook and other recent PowerPC-based

	  Macintosh machines. This is essentially a Lucent Orinoco card with 

	  a non-standard interface.



	  This driver does not support the Airport Extreme (802.11b/g). Use

	  the BCM43xx driver for Airport Extreme cards.



config PLX_HERMES

	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in PLX9052 based PCI adaptors.  These

	  adaptors are not a full PCMCIA controller but act as a more limited

	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that

	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear

	  MA301 is such an adaptor.



config TMD_HERMES

	tristate "Hermes in TMD7160 based PCI adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in TMD7160 based PCI adaptors.  These

	  adaptors are not a full PCMCIA controller but act as a more limited

	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that

	  802.11b PCMCIA cards can be used in desktop machines.



config NORTEL_HERMES

	tristate "Nortel emobility PCI adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in Nortel emobility PCI adaptors.  These

	  adaptors are not full PCMCIA controllers, but act as a more limited

	  PCI <-> PCMCIA bridge.



config PCI_HERMES

	tristate "Prism 2.5 PCI 802.11b adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on

	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b

	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also

	  common.  Some of the built-in wireless adaptors in laptops are of

	  this variety.



config PCMCIA_HERMES

	tristate "Hermes PCMCIA card support"

	depends on PCMCIA && HERMES

	---help---

	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such

	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/

	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and

	  others).  It should also be usable on various Prism II based cards

	  such as the Linksys, D-Link and Farallon Skyline.  It should also

	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.



	  You will very likely need the Wireless Tools in order to

	  configure your card and that /etc/pcmcia/wireless.opts works:

	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



config PCMCIA_SPECTRUM

	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"

	depends on PCMCIA && HERMES

	---help---



	  This is a driver for 802.11b cards using RAM-loadable Symbol

	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash

	  cards by Socket Communications and Intel PRO/Wireless 2011B.



	  This driver requires firmware download on startup.  Utilities

	  for downloading Symbol firmware are available at

	  <http://sourceforge.net/projects/orinoco/>



config ATMEL

      tristate "Atmel at76c50x chipset  802.11b support"

      depends on (PCI || PCMCIA) && WLAN_80211
@@ -596,5 +475,6 @@ source "drivers/net/wireless/b43/Kconfig" 
source "drivers/net/wireless/b43legacy/Kconfig"

source "drivers/net/wireless/zd1211rw/Kconfig"

source "drivers/net/wireless/rt2x00/Kconfig"

source "drivers/net/wireless/orinoco/Kconfig"



endmenu

drivers/net/wireless/orinoco/Kconfig

0 → 100644
+120 −0
Original line number Diff line number Diff line 
config HERMES

	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"

	depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select CRYPTO

	select CRYPTO_MICHAEL_MIC

	---help---

	  A driver for 802.11b wireless cards based on the "Hermes" or

	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast

	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)

	  - except for the Cisco/Aironet cards.  Cards supported include the

	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,

	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,

	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear

	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel

	  IPW2011, and Symbol Spectrum24 High Rate amongst others.



	  This option includes the guts of the driver, but in order to

	  actually use a card you will also need to enable support for PCMCIA

	  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.



	  You will also very likely also need the Wireless Tools in order to

	  configure your card and that /etc/pcmcia/wireless.opts works :

	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>



config HERMES_CACHE_FW_ON_INIT

	bool "Cache Hermes firmware on driver initialisation"

	depends on HERMES

	default y

	---help---

	  Say Y to cache any firmware required by the Hermes drivers

	  on startup.  The firmware will remain cached until the

	  driver is unloaded.  The cache uses 64K of RAM.



	  Otherwise load the firmware from userspace as required.  In

	  this case the driver should be unloaded and restarted

	  whenever the firmware is changed.



	  If you are not sure, say Y.



config APPLE_AIRPORT

	tristate "Apple Airport support (built-in)"

	depends on PPC_PMAC && HERMES

	help

	  Say Y here to support the Airport 802.11b wireless Ethernet hardware

	  built into the Macintosh iBook and other recent PowerPC-based

	  Macintosh machines. This is essentially a Lucent Orinoco card with

	  a non-standard interface.



	  This driver does not support the Airport Extreme (802.11b/g). Use

	  the BCM43xx driver for Airport Extreme cards.



config PLX_HERMES

	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in PLX9052 based PCI adaptors.  These

	  adaptors are not a full PCMCIA controller but act as a more limited

	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that

	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear

	  MA301 is such an adaptor.



config TMD_HERMES

	tristate "Hermes in TMD7160 based PCI adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in TMD7160 based PCI adaptors.  These

	  adaptors are not a full PCMCIA controller but act as a more limited

	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that

	  802.11b PCMCIA cards can be used in desktop machines.



config NORTEL_HERMES

	tristate "Nortel emobility PCI adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCMCIA cards supported by the "Hermes" (aka

	  orinoco) driver when used in Nortel emobility PCI adaptors.  These

	  adaptors are not full PCMCIA controllers, but act as a more limited

	  PCI <-> PCMCIA bridge.



config PCI_HERMES

	tristate "Prism 2.5 PCI 802.11b adaptor support"

	depends on PCI && HERMES

	help

	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on

	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b

	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also

	  common.  Some of the built-in wireless adaptors in laptops are of

	  this variety.



config PCMCIA_HERMES

	tristate "Hermes PCMCIA card support"

	depends on PCMCIA && HERMES

	---help---

	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such

	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/

	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and

	  others).  It should also be usable on various Prism II based cards

	  such as the Linksys, D-Link and Farallon Skyline.  It should also

	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.



	  You will very likely need the Wireless Tools in order to

	  configure your card and that /etc/pcmcia/wireless.opts works:

	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



config PCMCIA_SPECTRUM

	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"

	depends on PCMCIA && HERMES

	---help---



	  This is a driver for 802.11b cards using RAM-loadable Symbol

	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash

	  cards by Socket Communications and Intel PRO/Wireless 2011B.



	  This driver requires firmware download on startup.  Utilities

	  for downloading Symbol firmware are available at

	  <http://sourceforge.net/projects/orinoco/>

CRA Git | Maintained and supported by SUSTech CRA and CCSE