Commit 499e858e authored by Bjorn Helgaas's avatar Bjorn Helgaas
Browse files

Merge branches 'pci/host-artpec' and 'pci/host-generic' into pci/demodularize-hosts 

* pci/host-artpec:
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver
  PCI: Add DT binding for Axis ARTPEC-6 PCIe controller

* pci/host-generic:
  PCI: generic: Select IRQ_DOMAIN
parents af8c34ce 09e3cded d7d5677c

Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt

0 → 100644
+46 −0
Original line number Diff line number Diff line 
* Axis ARTPEC-6 PCIe interface



This PCIe host controller is based on the Synopsys DesignWare PCIe IP

and thus inherits all the common properties defined in designware-pcie.txt.



Required properties:

- compatible: "axis,artpec6-pcie", "snps,dw-pcie"

- reg: base addresses and lengths of the PCIe controller (DBI),

	the phy controller, and configuration address space.

- reg-names: Must include the following entries:

	- "dbi"

	- "phy"

	- "config"

- interrupts: A list of interrupt outputs of the controller. Must contain an

  entry for each entry in the interrupt-names property.

- interrupt-names: Must include the following entries:

	- "msi": The interrupt that is asserted when an MSI is received

- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,

	used to enable and control the Synopsys IP.



Example:



	pcie@f8050000 {

		compatible = "axis,artpec6-pcie", "snps,dw-pcie";

		reg = <0xf8050000 0x2000

		       0xf8040000 0x1000

		       0xc0000000 0x1000>;

		reg-names = "dbi", "phy", "config";

		#address-cells = <3>;

		#size-cells = <2>;

		device_type = "pci";

			  /* downstream I/O */

		ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000

			  /* non-prefetchable memory */

			  0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;

		num-lanes = <2>;

		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "msi";

		#interrupt-cells = <1>;

		interrupt-map-mask = <0 0 0 0x7>;

		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,

		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,

		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,

		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;

		axis,syscon-pcie = <&syscon>;

	};

MAINTAINERS

+9 −0
Original line number Diff line number Diff line
@@ -8823,6 +8823,15 @@ S: Maintained 
F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt

F:	drivers/pci/host/pci-xgene-msi.c



PCIE DRIVER FOR AXIS ARTPEC

M:	Niklas Cassel <niklas.cassel@axis.com>

M:	Jesper Nilsson <jesper.nilsson@axis.com>

L:	linux-arm-kernel@axis.com

L:	linux-pci@vger.kernel.org

S:	Maintained

F:	Documentation/devicetree/bindings/pci/axis,artpec*

F:	drivers/pci/host/*artpec*



PCIE DRIVER FOR HISILICON

M:	Zhou Wang <wangzhou1@hisilicon.com>

M:	Gabriele Paoloni <gabriele.paoloni@huawei.com>

drivers/pci/host/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -85,6 +85,7 @@ config PCI_HOST_GENERIC 
	bool "Generic PCI host controller"

	depends on (ARM || ARM64) && OF

	select PCI_HOST_COMMON

	select IRQ_DOMAIN

	help

	  Say Y here if you want to support a simple generic PCI host

	  controller, such as the one emulated by kvmtool.
@@ -245,4 +246,14 @@ config PCIE_ARMADA_8K 
	  Designware hardware and therefore the driver re-uses the

	  Designware core functions to implement the driver.



config PCIE_ARTPEC6

	bool "Axis ARTPEC-6 PCIe controller"

	depends on MACH_ARTPEC6

	depends on PCI_MSI_IRQ_DOMAIN

	select PCIE_DW

	select PCIEPORTBUS

	help

	  Say Y here to enable PCIe controller support on Axis ARTPEC-6

	  SoCs.  This PCIe controller uses the DesignWare core.



endmenu

drivers/pci/host/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -29,3 +29,4 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o 
obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o

obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o

obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o

obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o

drivers/pci/host/pcie-artpec6.c

0 → 100644
+284 −0
Original line number Diff line number Diff line 
/*

 * PCIe host controller driver for Axis ARTPEC-6 SoC

 *

 * Based on work done by Phil Edworthy <phil@edworthys.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <linux/delay.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/pci.h>

#include <linux/platform_device.h>

#include <linux/resource.h>

#include <linux/signal.h>

#include <linux/types.h>

#include <linux/interrupt.h>

#include <linux/mfd/syscon.h>

#include <linux/regmap.h>



#include "pcie-designware.h"



#define to_artpec6_pcie(x)	container_of(x, struct artpec6_pcie, pp)



struct artpec6_pcie {

	struct pcie_port	pp;

	struct regmap		*regmap;

	void __iomem		*phy_base;

};



/* PCIe Port Logic registers (memory-mapped) */

#define PL_OFFSET			0x700

#define PCIE_PHY_DEBUG_R0		(PL_OFFSET + 0x28)

#define PCIE_PHY_DEBUG_R1		(PL_OFFSET + 0x2c)



#define MISC_CONTROL_1_OFF		(PL_OFFSET + 0x1bc)

#define  DBI_RO_WR_EN			1



/* ARTPEC-6 specific registers */

#define PCIECFG				0x18

#define  PCIECFG_DBG_OEN		(1 << 24)

#define  PCIECFG_CORE_RESET_REQ		(1 << 21)

#define  PCIECFG_LTSSM_ENABLE		(1 << 20)

#define  PCIECFG_CLKREQ_B		(1 << 11)

#define  PCIECFG_REFCLK_ENABLE		(1 << 10)

#define  PCIECFG_PLL_ENABLE		(1 << 9)

#define  PCIECFG_PCLK_ENABLE		(1 << 8)

#define  PCIECFG_RISRCREN		(1 << 4)

#define  PCIECFG_MODE_TX_DRV_EN		(1 << 3)

#define  PCIECFG_CISRREN		(1 << 2)

#define  PCIECFG_MACRO_ENABLE		(1 << 0)



#define NOCCFG				0x40

#define NOCCFG_ENABLE_CLK_PCIE		(1 << 4)

#define NOCCFG_POWER_PCIE_IDLEACK	(1 << 3)

#define NOCCFG_POWER_PCIE_IDLE		(1 << 2)

#define NOCCFG_POWER_PCIE_IDLEREQ	(1 << 1)



#define PHY_STATUS			0x118

#define PHY_COSPLLLOCK			(1 << 0)



#define ARTPEC6_CPU_TO_BUS_ADDR		0x0fffffff



static int artpec6_pcie_establish_link(struct pcie_port *pp)

{

	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pp);

	u32 val;

	unsigned int retries;



	/* Hold DW core in reset */

	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);

	val |= PCIECFG_CORE_RESET_REQ;

	regmap_write(artpec6_pcie->regmap, PCIECFG, val);



	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);

	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */

		PCIECFG_MODE_TX_DRV_EN |

		PCIECFG_CISRREN |	/* Reference clock term. 100 Ohm */

		PCIECFG_MACRO_ENABLE;

	val |= PCIECFG_REFCLK_ENABLE;

	val &= ~PCIECFG_DBG_OEN;

	val &= ~PCIECFG_CLKREQ_B;

	regmap_write(artpec6_pcie->regmap, PCIECFG, val);

	usleep_range(5000, 6000);



	regmap_read(artpec6_pcie->regmap, NOCCFG, &val);

	val |= NOCCFG_ENABLE_CLK_PCIE;

	regmap_write(artpec6_pcie->regmap, NOCCFG, val);

	usleep_range(20, 30);



	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);

	val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE;

	regmap_write(artpec6_pcie->regmap, PCIECFG, val);

	usleep_range(6000, 7000);



	regmap_read(artpec6_pcie->regmap, NOCCFG, &val);

	val &= ~NOCCFG_POWER_PCIE_IDLEREQ;

	regmap_write(artpec6_pcie->regmap, NOCCFG, val);



	retries = 50;

	do {

		usleep_range(1000, 2000);

		regmap_read(artpec6_pcie->regmap, NOCCFG, &val);

		retries--;

	} while (retries &&

		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));



	retries = 50;

	do {

		usleep_range(1000, 2000);

		val = readl(artpec6_pcie->phy_base + PHY_STATUS);

		retries--;

	} while (retries && !(val & PHY_COSPLLLOCK));



	/* Take DW core out of reset */

	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);

	val &= ~PCIECFG_CORE_RESET_REQ;

	regmap_write(artpec6_pcie->regmap, PCIECFG, val);

	usleep_range(100, 200);



	/*

	 * Enable writing to config regs. This is required as the Synopsys

	 * driver changes the class code. That register needs DBI write enable.

	 */

	writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF);



	pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;

	pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;

	pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;

	pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;



	/* setup root complex */

	dw_pcie_setup_rc(pp);



	/* assert LTSSM enable */

	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);

	val |= PCIECFG_LTSSM_ENABLE;

	regmap_write(artpec6_pcie->regmap, PCIECFG, val);



	/* check if the link is up or not */

	if (!dw_pcie_wait_for_link(pp))

		return 0;



	dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",

		readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),

		readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));



	return -ETIMEDOUT;

}



static void artpec6_pcie_enable_interrupts(struct pcie_port *pp)

{

	if (IS_ENABLED(CONFIG_PCI_MSI))

		dw_pcie_msi_init(pp);

}



static void artpec6_pcie_host_init(struct pcie_port *pp)

{

	artpec6_pcie_establish_link(pp);

	artpec6_pcie_enable_interrupts(pp);

}



static int artpec6_pcie_link_up(struct pcie_port *pp)

{

	u32 rc;



	/*

	 * Get status from Synopsys IP

	 * link is debug bit 36, debug register 1 starts at bit 32

	 */

	rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));

	if (rc)

		return 1;



	return 0;

}



static struct pcie_host_ops artpec6_pcie_host_ops = {

	.link_up = artpec6_pcie_link_up,

	.host_init = artpec6_pcie_host_init,

};



static irqreturn_t artpec6_pcie_msi_handler(int irq, void *arg)

{

	struct pcie_port *pp = arg;



	return dw_handle_msi_irq(pp);

}



static int __init artpec6_add_pcie_port(struct pcie_port *pp,

					struct platform_device *pdev)

{

	int ret;



	if (IS_ENABLED(CONFIG_PCI_MSI)) {

		pp->msi_irq = platform_get_irq_byname(pdev, "msi");

		if (pp->msi_irq <= 0) {

			dev_err(&pdev->dev, "failed to get MSI irq\n");

			return -ENODEV;

		}



		ret = devm_request_irq(&pdev->dev, pp->msi_irq,

				       artpec6_pcie_msi_handler,

				       IRQF_SHARED | IRQF_NO_THREAD,

				       "artpec6-pcie-msi", pp);

		if (ret) {

			dev_err(&pdev->dev, "failed to request MSI irq\n");

			return ret;

		}

	}



	pp->root_bus_nr = -1;

	pp->ops = &artpec6_pcie_host_ops;



	ret = dw_pcie_host_init(pp);

	if (ret) {

		dev_err(&pdev->dev, "failed to initialize host\n");

		return ret;

	}



	return 0;

}



static int artpec6_pcie_probe(struct platform_device *pdev)

{

	struct artpec6_pcie *artpec6_pcie;

	struct pcie_port *pp;

	struct resource *dbi_base;

	struct resource *phy_base;

	int ret;



	artpec6_pcie = devm_kzalloc(&pdev->dev, sizeof(*artpec6_pcie),

				    GFP_KERNEL);

	if (!artpec6_pcie)

		return -ENOMEM;



	pp = &artpec6_pcie->pp;

	pp->dev = &pdev->dev;



	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");

	pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);

	if (IS_ERR(pp->dbi_base))

		return PTR_ERR(pp->dbi_base);



	phy_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");

	artpec6_pcie->phy_base = devm_ioremap_resource(&pdev->dev, phy_base);

	if (IS_ERR(artpec6_pcie->phy_base))

		return PTR_ERR(artpec6_pcie->phy_base);



	artpec6_pcie->regmap =

		syscon_regmap_lookup_by_phandle(pdev->dev.of_node,

						"axis,syscon-pcie");

	if (IS_ERR(artpec6_pcie->regmap))

		return PTR_ERR(artpec6_pcie->regmap);



	ret = artpec6_add_pcie_port(pp, pdev);

	if (ret < 0)

		return ret;



	platform_set_drvdata(pdev, artpec6_pcie);

	return 0;

}



static const struct of_device_id artpec6_pcie_of_match[] = {

	{ .compatible = "axis,artpec6-pcie", },

	{},

};

MODULE_DEVICE_TABLE(of, artpec6_pcie_of_match);



static struct platform_driver artpec6_pcie_driver = {

	.probe = artpec6_pcie_probe,

	.driver = {

		.name	= "artpec6-pcie",

		.of_match_table = artpec6_pcie_of_match,

	},

};



module_platform_driver(artpec6_pcie_driver);



MODULE_AUTHOR("Niklas Cassel <niklas.cassel@axis.com>");

MODULE_DESCRIPTION("Axis ARTPEC-6 PCIe host controller driver");

MODULE_LICENSE("GPL v2");

CRA Git | Maintained and supported by SUSTech CRA and CCSE