Commit 4870c217 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Mark Brown
Browse files

spi: spi-ep93xx: always handle transfer specific settings 



__spi_async(), which starts every SPI message transfer, initializes
the bits_per_word and max speed for every transfer in the message.
Since the conditional test in ep93xx_spi_process_transfer() will
always succeed just remove it and always call ep93xx_spi_chip_setup()
to configure the hardware for each transfer in the message.

Remove the redundant ep93xx_spi_chp_setup() in ep93xx_spi_process_transfer()
which just initializes the hardware to the "default" based on the SPI
device.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: default avatarMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent ad81f054

drivers/spi/spi-ep93xx.c

+10 −33
Original line number Diff line number Diff line
@@ -708,38 +708,20 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, 
					struct spi_transfer *t)

{

	struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);

	int err;



	msg->state = t;



	/*

	 * Handle any transfer specific settings if needed. We use

	 * temporary chip settings here and restore original later when

	 * the transfer is finished.

	 */

	if (t->speed_hz || t->bits_per_word) {

		struct ep93xx_spi_chip tmp_chip = *chip;



		if (t->speed_hz) {

			int err;



			err = ep93xx_spi_calc_divisors(espi, &tmp_chip,

						       t->speed_hz);

	err = ep93xx_spi_calc_divisors(espi, chip, t->speed_hz);

	if (err) {

				dev_err(&espi->pdev->dev,

					"failed to adjust speed\n");

		dev_err(&espi->pdev->dev, "failed to adjust speed\n");

		msg->status = err;

		return;

	}

		}



		if (t->bits_per_word)

			tmp_chip.dss = bits_per_word_to_dss(t->bits_per_word);

	chip->dss = bits_per_word_to_dss(t->bits_per_word);



		/*

		 * Set up temporary new hw settings for this transfer.

		 */

		ep93xx_spi_chip_setup(espi, &tmp_chip);

	}

	ep93xx_spi_chip_setup(espi, chip);



	espi->rx = 0;

	espi->tx = 0;
@@ -783,9 +765,6 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, 
			ep93xx_spi_cs_control(msg->spi, true);

		}

	}



	if (t->speed_hz || t->bits_per_word)

		ep93xx_spi_chip_setup(espi, chip);

}



/*
@@ -838,10 +817,8 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, 
	espi->fifo_level = 0;



	/*

	 * Update SPI controller registers according to spi device and assert

	 * the chipselect.

	 * Assert the chipselect.

	 */

	ep93xx_spi_chip_setup(espi, spi_get_ctldata(msg->spi));

	ep93xx_spi_cs_control(msg->spi, true);



	list_for_each_entry(t, &msg->transfers, transfer_list) {

CRA Git | Maintained and supported by SUSTech CRA and CCSE