Commit 48476df9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd 

Pull MTD update from David Woodhouse:
 "Fairly unexciting MTD merge for 3.9:

   - misc clean-ups in the MTD command-line partitioning parser
     (cmdlinepart)
   - add flash locking support for STmicro chips serial flash chips, as
     well as for CFI command set 2 chips.
   - new driver for the ELM error correction HW module found in various
     TI chips, enable the OMAP NAND driver to use the ELM HW error
     correction
   - added number of new serial flash IDs
   - various fixes and improvements in the gpmi NAND driver
   - bcm47xx NAND driver improvements
   - make the mtdpart module actually removable"

* tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits)
  mtd: map: BUG() in non handled cases
  mtd: bcm47xxnflash: use pr_fmt for module prefix in messages
  mtd: davinci_nand: Use managed resources
  mtd: mtd_torturetest can cause stack overflows
  mtd: physmap_of: Convert device allocation to managed devm_kzalloc()
  mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement.
  mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.
  mtd: atmel_nand: avoid to report an error when lookup table offset is 0.
  mtd: bcm47xxsflash: adjust names of bus-specific functions
  mtd: bcm47xxpart: improve probing of nvram partition
  mtd: bcm47xxpart: add support for other erase sizes
  mtd: bcm47xxnflash: register this as normal driver
  mtd: bcm47xxnflash: fix message
  mtd: bcm47xxsflash: register this as normal driver
  mtd: bcm47xxsflash: write number of written bytes
  mtd: gpmi: add sanity check for the ECC
  mtd: gpmi: set the Golois Field bit for mx6q's BCH
  mtd: devices: elm: Removes <xx> literals in elm DT node
  mtd: gpmi: fix a dereferencing freed memory error
  mtd: fix the wrong timeo for panic_nand_wait()
  ...
parents 37cae6ad 24dea0c9

Documentation/devicetree/bindings/mtd/elm.txt

0 → 100644
+16 −0
Original line number Diff line number Diff line 
Error location module



Required properties:

- compatible: Must be "ti,am33xx-elm"

- reg: physical base address and size of the registers map.

- interrupts: Interrupt number for the elm.



Optional properties:

- ti,hwmods: Name of the hwmod associated to the elm



Example:

elm: elm@0 {

	compatible = "ti,am3352-elm";

	reg = <0x48080000 0x2000>;

	interrupts = <4>;

};

Documentation/devicetree/bindings/mtd/mtd-physmap.txt

+3 −0
Original line number Diff line number Diff line
@@ -26,6 +26,9 @@ file systems on embedded devices. 
 - linux,mtd-name: allow to specify the mtd name for retro capability with

   physmap-flash drivers as boot loader pass the mtd partition via the old

   device name physmap-flash.

 - use-advanced-sector-protection: boolean to enable support for the

   advanced sector protection (Spansion: PPB - Persistent Protection

   Bits) locking.



For JEDEC compatible devices, the following additional properties

are defined:

drivers/mtd/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -74,8 +74,8 @@ config MTD_REDBOOT_PARTS_READONLY 
endif # MTD_REDBOOT_PARTS



config MTD_CMDLINE_PARTS

	bool "Command line partition table parsing"

	depends on MTD = "y"

	tristate "Command line partition table parsing"

	depends on MTD

	---help---

	  Allow generic configuration of the MTD partition tables via the kernel

	  command line. Multiple flash resources are supported for hardware where

drivers/mtd/ar7part.c

+6 −0
Original line number Diff line number Diff line
@@ -142,7 +142,13 @@ static int __init ar7_parser_init(void) 
	return register_mtd_parser(&ar7_parser);

}



static void __exit ar7_parser_exit(void)

{

	deregister_mtd_parser(&ar7_parser);

}



module_init(ar7_parser_init);

module_exit(ar7_parser_exit);



MODULE_LICENSE("GPL");

MODULE_AUTHOR(	"Felix Fietkau <nbd@openwrt.org>, "

drivers/mtd/bcm47xxpart.c

+34 −15
Original line number Diff line number Diff line
@@ -19,12 +19,6 @@ 
/* 10 parts were found on sflash on Netgear WNDR4500 */

#define BCM47XXPART_MAX_PARTS		12



/*

 * Amount of bytes we read when analyzing each block of flash memory.

 * Set it big enough to allow detecting partition and reading important data.

 */

#define BCM47XXPART_BYTES_TO_READ	0x404



/* Magics */

#define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */

#define POT_MAGIC1			0x54544f50	/* POTT */
@@ -59,13 +53,21 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
	uint32_t *buf;

	size_t bytes_read;

	uint32_t offset;

	uint32_t blocksize = 0x10000;

	uint32_t blocksize = master->erasesize;

	struct trx_header *trx;

	int trx_part = -1;

	int last_trx_part = -1;

	int max_bytes_to_read = 0x8004;



	if (blocksize <= 0x10000)

		blocksize = 0x10000;

	if (blocksize == 0x20000)

		max_bytes_to_read = 0x18004;



	/* Alloc */

	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,

			GFP_KERNEL);

	buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);

	buf = kzalloc(max_bytes_to_read, GFP_KERNEL);



	/* Parse block by block looking for magics */

	for (offset = 0; offset <= master->size - blocksize;
@@ -80,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
		}



		/* Read beginning of the block */

		if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,

		if (mtd_read(master, offset, max_bytes_to_read,

			     &bytes_read, (uint8_t *)buf) < 0) {

			pr_err("mtd_read error while parsing (offset: 0x%X)!\n",

			       offset);
@@ -95,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
		}



		/* Standard NVRAM */

		if (buf[0x000 / 4] == NVRAM_HEADER) {

		if (buf[0x000 / 4] == NVRAM_HEADER ||

		    buf[0x1000 / 4] == NVRAM_HEADER ||

		    buf[0x8000 / 4] == NVRAM_HEADER ||

		    (blocksize == 0x20000 && (

		      buf[0x10000 / 4] == NVRAM_HEADER ||

		      buf[0x11000 / 4] == NVRAM_HEADER ||

		      buf[0x18000 / 4] == NVRAM_HEADER))) {

			bcm47xxpart_add_part(&parts[curr_part++], "nvram",

					     offset, 0);

			offset = rounddown(offset, blocksize);

			continue;

		}
@@ -131,6 +140,10 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
		if (buf[0x000 / 4] == TRX_MAGIC) {

			trx = (struct trx_header *)buf;



			trx_part = curr_part;

			bcm47xxpart_add_part(&parts[curr_part++], "firmware",

					     offset, 0);



			i = 0;

			/* We have LZMA loader if offset[2] points to sth */

			if (trx->offset[2]) {
@@ -154,6 +167,8 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
					     offset + trx->offset[i], 0);

			i++;



			last_trx_part = curr_part - 1;



			/*

			 * We have whole TRX scanned, skip to the next part. Use

			 * roundown (not roundup), as the loop will increase
@@ -169,11 +184,15 @@ static int bcm47xxpart_parse(struct mtd_info *master, 
	 * Assume that partitions end at the beginning of the one they are

	 * followed by.

	 */

	for (i = 0; i < curr_part - 1; i++)

		parts[i].size = parts[i + 1].offset - parts[i].offset;

	if (curr_part > 0)

		parts[curr_part - 1].size =

				master->size - parts[curr_part - 1].offset;

	for (i = 0; i < curr_part; i++) {

		u64 next_part_offset = (i < curr_part - 1) ?

				       parts[i + 1].offset : master->size;



		parts[i].size = next_part_offset - parts[i].offset;

		if (i == last_trx_part && trx_part >= 0)

			parts[trx_part].size = next_part_offset -

					       parts[trx_part].offset;

	}



	*pparts = parts;

	return curr_part;

CRA Git | Maintained and supported by SUSTech CRA and CCSE