+68
−11
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Traditionally, fatal MCE will cause Linux print error log to console then reboot. Because MCE registers will preserve their content after warm reboot, the hardware error can be logged to disk or network after reboot. But system may fail to warm reboot, then you may lose the hardware error log. ERST can help here. Through saving the hardware error log into flash via ERST before go panic, the hardware error log can be gotten from the flash after system boot successful again. The fatal MCE processing procedure with ERST involved is as follow: - Hardware detect error, MCE raised - MCE read MCE registers, check error severity (fatal), prepare error record - Write MCE error record into flash via ERST - Go panic, then trigger system reboot - System reboot, /sbin/mcelog run, it reads /dev/mcelog to check flash for error record of previous boot via ERST, and output and clear them if available - /sbin/mcelog logs error records into disk or network ERST only accepts CPER record format, but there is no pre-defined CPER section can accommodate all information in struct mce, so a customized section type is defined to hold struct mce inside a CPER record as an error section. Signed-off-by:Huang Ying <ying.huang@intel.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Len Brown <len.brown@intel.com>
CRA Git | Maintained and supported by SUSTech CRA and CCSE