Commit 4788a594 authored by Vineet Gupta's avatar Vineet Gupta
Browse files

ARC: Support for high priority interrupts in the in-core intc 



There is a bit of hack/kludge right now where we disable preemption if a
L2 (High prio) IRQ is taken while L1 (Low prio) is active.

Need to revisit this

Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 769bc1fd

arch/arc/Kconfig

+19 −0
Original line number Diff line number Diff line
@@ -208,6 +208,25 @@ config ARC_PAGE_SIZE_4K 


endchoice



config ARC_COMPACT_IRQ_LEVELS

	bool "ARCompact IRQ Priorities: High(2)/Low(1)"

	default n

	# Timer HAS to be high priority, for any other high priority config

	select ARC_IRQ3_LV2



if ARC_COMPACT_IRQ_LEVELS



config ARC_IRQ3_LV2

	bool



config ARC_IRQ5_LV2

	bool



config ARC_IRQ6_LV2

	bool



endif



config ARC_FPU_SAVE_RESTORE

	bool "Enable FPU state persistence across context switch"

	default n

arch/arc/include/asm/entry.h

+95 −0
Original line number Diff line number Diff line
@@ -5,6 +5,12 @@ 
 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 *

 * Vineetg: March 2009 (Supporting 2 levels of Interrupts)

 *  Stack switching code can no longer reliably rely on the fact that

 *  if we are NOT in user mode, stack is switched to kernel mode.

 *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed

 *  it's prologue including stack switching from user mode

 *

 * Vineetg: Aug 28th 2008: Bug #94984

 *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap

 *   Normally CPU does this automatically, however when doing FAKE rtie,
@@ -268,6 +274,33 @@ 
	 * assume SP is kernel mode SP. _NO_ need to do any stack switching

	 */



#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS

	/* However....

	 * If Level 2 Interrupts enabled, we may end up with a corner case:

	 * 1. User Task executing

	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)

	 * 3. But before it could switch SP from USER to KERNEL stack

	 *      a L2 IRQ "Interrupts" L1

	 * Thay way although L2 IRQ happened in Kernel mode, stack is still

	 * not switched.

	 * To handle this, we may need to switch stack even if in kernel mode

	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )

	 */

	brlo sp, VMALLOC_START, 88f



	/* TODO: vineetg:

	 * We need to be a bit more cautious here. What if a kernel bug in

	 * L1 ISR, caused SP to go whaco (some small value which looks like

	 * USER stk) and then we take L2 ISR.

	 * Above brlo alone would treat it as a valid L1-L2 sceanrio

	 * instead of shouting alound

	 * The only feasible way is to make sure this L2 happened in

	 * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in

	 * L1 ISR before it switches stack

	 */



#endif



	/* Save Pre Intr/Exception KERNEL MODE SP on kernel stack

	 * safe-keeping not really needed, but it keeps the epilogue code

	 * (SP restore) simpler/uniform.
@@ -503,6 +536,42 @@ 
	sub sp, sp, 4

.endm



.macro SAVE_ALL_INT2



	/* TODO-vineetg: SMP we can't use global nor can we use

	*   SCRATCH0 as we do for int1 because while int1 is using

	*   it, int2 can come

	*/

	/* retsore original r9 , saved in sys_saved_r9 */

	ld  r9, [@int2_saved_reg]



	/* now we are ready to save the remaining context :) */

	st      orig_r8_IS_IRQ2, [sp, 8]    /* Event Type */

	st      0, [sp, 4]    /* orig_r0 , N/A for IRQ */

	SAVE_CALLER_SAVED

	st.a    r26, [sp, -4]   /* gp */

	st.a    fp, [sp, -4]

	st.a    blink, [sp, -4]

	st.a    ilink2, [sp, -4]

	lr	r9, [status32_l2]

	st.a    r9, [sp, -4]

	st.a    lp_count, [sp, -4]

	lr	r9, [lp_end]

	st.a    r9, [sp, -4]

	lr	r9, [lp_start]

	st.a    r9, [sp, -4]

	lr	r9, [bta_l2]

	st.a    r9, [sp, -4]



#ifdef PT_REGS_CANARY

	mov   r9, 0xdeadbee2

	st    r9, [sp, -4]

#endif



	/* move up by 1 word to "create" pt_regs->"stack_place_holder" */

	sub sp, sp, 4

.endm



/*--------------------------------------------------------------

 * Restore all registers used by interrupt handlers.

 *
@@ -537,6 +606,32 @@ 
	/* orig_r0 and orig_r8 skipped automatically */

.endm



.macro RESTORE_ALL_INT2

	add sp, sp, 4       /* hop over unused "pt_regs->stack_place_holder" */



	ld.ab   r9, [sp, 4]

	sr	r9, [bta_l2]

	ld.ab   r9, [sp, 4]

	sr	r9, [lp_start]

	ld.ab   r9, [sp, 4]

	sr	r9, [lp_end]

	ld.ab   r9, [sp, 4]

	mov	lp_count, r9

	ld.ab   r9, [sp, 4]

	sr	r9, [status32_l2]

	ld.ab   r9, [sp, 4]

	mov	ilink2, r9

	ld.ab   blink, [sp, 4]

	ld.ab   fp, [sp, 4]

	ld.ab   r26, [sp, 4]    /* gp */

	RESTORE_CALLER_SAVED



	ld  sp, [sp] /* restore original sp */

	/* orig_r0 and orig_r8 skipped automatically */



.endm





/* Get CPU-ID of this core */

.macro  GET_CPU_ID  reg

	lr  \reg, [identity]

arch/arc/include/asm/irqflags.h

+5 −1
Original line number Diff line number Diff line
@@ -95,7 +95,11 @@ static inline long arch_local_save_flags(void) 
 */

static inline int arch_irqs_disabled_flags(unsigned long flags)

{

	return !(flags & (STATUS_E1_MASK));

	return !(flags & (STATUS_E1_MASK

#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS

			| STATUS_E2_MASK

#endif

		));

}



static inline int arch_irqs_disabled(void)

arch/arc/kernel/entry.S

+117 −0
Original line number Diff line number Diff line
@@ -31,6 +31,8 @@ 
 *   exception. Thus FAKE RTIE needed in low level Priv-Violation handler.

 *   Instr Error could also cause similar scenario, so same there as well.

 *

 * Vineetg: March 2009 (Supporting 2 levels of Interrupts)

 *

 * Vineetg: Aug 28th 2008: Bug #94984

 *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap

 *   Normally CPU does this automatically, however when doing FAKE rtie,
@@ -96,13 +98,25 @@ VECTOR mem_service ; 0x8, Mem exception (0x1) 
VECTOR   instr_service           ; 0x10, Instrn Error   (0x2)



; ******************** Device ISRs **********************

#ifdef CONFIG_ARC_IRQ3_LV2

VECTOR   handle_interrupt_level2

#else

VECTOR   handle_interrupt_level1

#endif



VECTOR   handle_interrupt_level1



#ifdef CONFIG_ARC_IRQ5_LV2

VECTOR   handle_interrupt_level2

#else

VECTOR   handle_interrupt_level1

#endif



#ifdef CONFIG_ARC_IRQ6_LV2

VECTOR   handle_interrupt_level2

#else

VECTOR   handle_interrupt_level1

#endif



.rept   25

VECTOR   handle_interrupt_level1 ; Other devices
@@ -139,6 +153,17 @@ VECTOR reserved ; Reserved Exceptions 
int1_saved_reg:

	.zero 4



/* Each Interrupt level needs it's own scratch */

#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS



	.section .data		; NOT .global

	.type   int2_saved_reg, @object

	.size   int2_saved_reg, 4

int2_saved_reg:

	.zero 4



#endif



; ---------------------------------------------

	.section .text, "ax",@progbits
@@ -152,6 +177,55 @@ reserved: ; processor restart 


;##################### Interrupt Handling ##############################



#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS

; ---------------------------------------------

;  Level 2 ISR: Can interrupt a Level 1 ISR

; ---------------------------------------------

ARC_ENTRY handle_interrupt_level2



	; TODO-vineetg for SMP this wont work

	; free up r9 as scratchpad

	st  r9, [@int2_saved_reg]



	;Which mode (user/kernel) was the system in when intr occured

	lr  r9, [status32_l2]



	SWITCH_TO_KERNEL_STK

	SAVE_ALL_INT2



	;------------------------------------------------------

	; if L2 IRQ interrupted a L1 ISR, disable preemption

	;------------------------------------------------------



	ld r9, [sp, PT_status32]        ; get statu32_l2 (saved in pt_regs)

	bbit0 r9, STATUS_A1_BIT, 1f     ; L1 not active when L2 IRQ, so normal



	; A1 is set in status32_l2

	; bump thread_info->preempt_count (Disable preemption)

	GET_CURR_THR_INFO_FROM_SP   r10

	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]

	add     r9, r9, 1

	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]



1:

	;------------------------------------------------------

	; setup params for Linux common ISR and invoke it

	;------------------------------------------------------

	lr  r0, [icause2]

	and r0, r0, 0x1f



	bl.d  @arch_do_IRQ

	mov r1, sp



	mov r8,0x2

	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg



	b   ret_from_exception



ARC_EXIT handle_interrupt_level2



#endif



; ---------------------------------------------

;  Level 1 ISR

; ---------------------------------------------
@@ -619,6 +693,49 @@ restore_regs : 


not_exception:



#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS



	bbit0  r10, STATUS_A2_BIT, not_level2_interrupt



	;------------------------------------------------------------------

	; if L2 IRQ interrupted a L1 ISR,  we'd disbaled preemption earlier

	; so that sched doesnt move to new task, causing L1 to be delayed

	; undeterministically. Now that we've achieved that, lets reset

	; things to what they were, before returning from L2 context

	;----------------------------------------------------------------



	ld r9, [sp, PT_orig_r8]        ; get orig_r8 to make sure it is

	brne r9, orig_r8_IS_IRQ2, 149f ; infact a L2 ISR ret path



	ld r9, [sp, PT_status32]       ; get statu32_l2 (saved in pt_regs)

	bbit0 r9, STATUS_A1_BIT, 149f  ; L1 not active when L2 IRQ, so normal



	; A1 is set in status32_l2

	; decrement thread_info->preempt_count (re-enable preemption)

	GET_CURR_THR_INFO_FROM_SP   r10

	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]



	; paranoid check, given A1 was active when A2 happened, preempt count

	; must not be 0 beccause we would have incremented it.

	; If this does happen we simply HALT as it means a BUG !!!

	cmp     r9, 0

	bnz     2f

	flag 1



2:

	sub     r9, r9, 1

	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]



149:

	;return from level 2

	RESTORE_ALL_INT2

debug_marker_l2:

	rtie



not_level2_interrupt:



#endif



	bbit0  r10, STATUS_A1_BIT, not_level1_interrupt



	;return from level 1

arch/arc/kernel/irq.c

+103 −1
Original line number Diff line number Diff line
@@ -23,15 +23,32 @@ 
 * what it does ?

 * -setup Vector Table Base Reg - in case Linux not linked at 0x8000_0000

 * -Disable all IRQs (on CPU side)

 * -Optionally, setup the High priority Interrupts as Level 2 IRQs

 */

void __init arc_init_IRQ(void)

{

	int level_mask = level_mask;

	int level_mask = 0;



	write_aux_reg(AUX_INTR_VEC_BASE, _int_vec_base_lds);



	/* Disable all IRQs: enable them as devices request */

	write_aux_reg(AUX_IENABLE, 0);



       /* setup any high priority Interrupts (Level2 in ARCompact jargon) */

#ifdef CONFIG_ARC_IRQ3_LV2

	level_mask |= (1 << 3);

#endif

#ifdef CONFIG_ARC_IRQ5_LV2

	level_mask |= (1 << 5);

#endif

#ifdef CONFIG_ARC_IRQ6_LV2

	level_mask |= (1 << 6);

#endif



	if (level_mask) {

		pr_info("Level-2 interrupts bitset %x\n", level_mask);

		write_aux_reg(AUX_IRQ_LEV, level_mask);

	}

}



/*
@@ -141,6 +158,90 @@ int __init get_hw_config_num_irq(void) 
	return 0;

}



/*

 * arch_local_irq_enable - Enable interrupts.

 *

 * 1. Explicitly called to re-enable interrupts

 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc

 *    which maybe in hard ISR itself

 *

 * Semantics of this function change depending on where it is called from:

 *

 * -If called from hard-ISR, it must not invert interrupt priorities

 *  e.g. suppose TIMER is high priority (Level 2) IRQ

 *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.

 *    Here local_irq_enable( ) shd not re-enable lower priority interrupts

 * -If called from soft-ISR, it must re-enable all interrupts

 *    soft ISR are low prioity jobs which can be very slow, thus all IRQs

 *    must be enabled while they run.

 *    Now hardware context wise we may still be in L2 ISR (not done rtie)

 *    still we must re-enable both L1 and L2 IRQs

 *  Another twist is prev scenario with flow being

 *     L1 ISR ==> interrupted by L2 ISR  ==> L2 soft ISR

 *     here we must not re-enable Ll as prev Ll Interrupt's h/w context will get

 *     over-written (this is deficiency in ARC700 Interrupt mechanism)

 */



#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS	/* Complex version for 2 IRQ levels */



void arch_local_irq_enable(void)

{



	unsigned long flags;

	flags = arch_local_save_flags();



	/* Allow both L1 and L2 at the onset */

	flags |= (STATUS_E1_MASK | STATUS_E2_MASK);



	/* Called from hard ISR (between irq_enter and irq_exit) */

	if (in_irq()) {



		/* If in L2 ISR, don't re-enable any further IRQs as this can

		 * cause IRQ priorities to get upside down. e.g. it could allow

		 * L1 be taken while in L2 hard ISR which is wrong not only in

		 * theory, it can also cause the dreaded L1-L2-L1 scenario

		 */

		if (flags & STATUS_A2_MASK)

			flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK);



		/* Even if in L1 ISR, allowe Higher prio L2 IRQs */

		else if (flags & STATUS_A1_MASK)

			flags &= ~(STATUS_E1_MASK);

	}



	/* called from soft IRQ, ideally we want to re-enable all levels */



	else if (in_softirq()) {



		/* However if this is case of L1 interrupted by L2,

		 * re-enabling both may cause whaco L1-L2-L1 scenario

		 * because ARC700 allows level 1 to interrupt an active L2 ISR

		 * Thus we disable both

		 * However some code, executing in soft ISR wants some IRQs

		 * to be enabled so we re-enable L2 only

		 *

		 * How do we determine L1 intr by L2

		 *  -A2 is set (means in L2 ISR)

		 *  -E1 is set in this ISR's pt_regs->status32 which is

		 *      saved copy of status32_l2 when l2 ISR happened

		 */

		struct pt_regs *pt = get_irq_regs();

		if ((flags & STATUS_A2_MASK) && pt &&

		    (pt->status32 & STATUS_A1_MASK)) {

			/*flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); */

			flags &= ~(STATUS_E1_MASK);

		}

	}



	arch_local_irq_restore(flags);

}



#else /* ! CONFIG_ARC_COMPACT_IRQ_LEVELS */



/*

 * Simpler version for only 1 level of interrupt

 * Here we only Worry about Level 1 Bits

 */

void arch_local_irq_enable(void)

{

	unsigned long flags;
@@ -158,4 +259,5 @@ void arch_local_irq_enable(void) 
	flags |= (STATUS_E1_MASK | STATUS_E2_MASK);

	arch_local_irq_restore(flags);

}

#endif

EXPORT_SYMBOL(arch_local_irq_enable);

CRA Git | Maintained and supported by SUSTech CRA and CCSE